← Commit history

Initial commit: component/sn65hvd10qdrep

Ray ·8e82aae9ff ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# SN65HVD10QDREP++**Texas Instruments** · RS-485 / RS-422 ICs · SOIC-8++SN65HVD10QDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | R | output | Receiver output; driven high (logic H) when the differential input VID = VA-VB is >= -0.01 V and low when VID <= -0.2 V, with failsafe high output for open-circuit, idle, or shorted-bus conditions; forced to high impedance when RE is high. |+| 2 | RE | input | Active-low receiver output enable; RE at logic low enables the receiver output R, RE at logic high (or VCC) places R in high-impedance state and puts the receiver in low-current standby along with DE high. |+| 3 | DE | input | Active-high driver output enable; DE at logic high enables the differential driver outputs A and B, DE at logic low forces the driver outputs to high impedance (disabled). |+| 4 | D | input | Driver data input; a high level drives output A high and B low, a low level (or open input with DE high) drives A low and B high. |+| 5 | GND | power_in | Device ground reference terminal, network ground for all voltage measurements except differential I/O bus voltages. |+| 6 | A | bidirectional | Noninverting driver output / receiver true differential input, part of the differential bus I/O port; bus terminal voltage range -7 V to 12 V, with short-circuit protection over that range and withstands transient pulses of -50 V to 50 V through 100 ohm. |+| 7 | B | bidirectional | Inverting driver output / receiver complementary differential input, part of the differential bus I/O port; bus terminal voltage range -7 V to 12 V, with short-circuit protection over that range and withstands transient pulses of -50 V to 50 V through 100 ohm. |+| 8 | VCC | power_in | Positive supply voltage input; recommended operating range 3 V to 3.6 V (absolute maximum -0.3 V to 6 V). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Interface |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `SN65HVD10QDREP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `sn65hvd10qdrep-etched.step` / `sn65hvd10qdrep-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65hvd10qdrep.step` / `sn65hvd10qdrep.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn65hvd12-ep) (27 pp, sha256 `f1281ae52fc19591`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn65hvd10qdrep-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "sn65hvd10qdrep",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RS-485 / RS-422 ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "sn65hvd10qdrep",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn65hvd10qdrep.kicad_sym",+    "sn65hvd10qdrep.kicad_mod",+    "sn65hvd10qdrep.glb",+    "sn65hvd10qdrep.step",+    "sn65hvd10qdrep.lbr",+    "docs/hero.png",+    "docs/sn65hvd10qdrep-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN65HVD10QDREP",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Interface",+    "subcategory": "RS-485 / RS-422 ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/sn65hvd12-ep",+    "parts": {+      "symbol": "sn65hvd10qdrep.kicad_sym",+      "footprint": "sn65hvd10qdrep.kicad_mod",+      "model_3d": "sn65hvd10qdrep-etched.glb",+      "model_3d_plain": "sn65hvd10qdrep.glb",+      "model_3d_step": "sn65hvd10qdrep-etched.step",+      "model_3d_step_plain": "sn65hvd10qdrep.step",+      "lbr": "sn65hvd10qdrep.lbr"+    },+    "distributor_links": {+      "lcsc": "C2671073"+    },+    "pins": [+      {+        "number": "1",+        "name": "R",+        "type": "output",+        "description": "Receiver output; driven high (logic H) when the differential input VID = VA-VB is >= -0.01 V and low when VID <= -0.2 V, with failsafe high output for open-circuit, idle, or shorted-bus conditions; forced to high impedance when RE is high."+      },+      {+        "number": "2",+        "name": "RE",+        "type": "input",+        "description": "Active-low receiver output enable; RE at logic low enables the receiver output R, RE at logic high (or VCC) places R in high-impedance state and puts the receiver in low-current standby along with DE high."+      },+      {+        "number": "3",+        "name": "DE",+        "type": "input",+        "description": "Active-high driver output enable; DE at logic high enables the differential driver outputs A and B, DE at logic low forces the driver outputs to high impedance (disabled)."+      },+      {+        "number": "4",+        "name": "D",+        "type": "input",+        "description": "Driver data input; a high level drives output A high and B low, a low level (or open input with DE high) drives A low and B high."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference terminal, network ground for all voltage measurements except differential I/O bus voltages."+      },+      {+        "number": "6",+        "name": "A",+        "type": "bidirectional",+        "description": "Noninverting driver output / receiver true differential input, part of the differential bus I/O port; bus terminal voltage range -7 V to 12 V, with short-circuit protection over that range and withstands transient pulses of -50 V to 50 V through 100 ohm."+      },+      {+        "number": "7",+        "name": "B",+        "type": "bidirectional",+        "description": "Inverting driver output / receiver complementary differential input, part of the differential bus I/O port; bus terminal voltage range -7 V to 12 V, with short-circuit protection over that range and withstands transient pulses of -50 V to 50 V through 100 ohm."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage input; recommended operating range 3 V to 3.6 V (absolute maximum -0.3 V to 6 V)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 27,+        "cost_usd": 0.2446,+        "at": "2026-09-23T07:46:23"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/sn65hvd12-ep",+        "pages": 27,+        "sha256": "f1281ae52fc19591",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file