← Commit history

Initial commit: component/sn65c3243dbr

Ray ·2744dbc150 ·
2 files changed +326
README.mdadded+65
@@ -0,0 +1,65 @@+# SN65C3243DBR++**Texas Instruments** · RS232 ICs · SSOP-28-208mil++SN65C3243DBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C2+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor. |+| 2 | C2- | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |+| 3 | V- | power_out | Negative charge pump output voltage with range 0.3 V to -7 V. |+| 4 | RIN1 | input | RS-232 receiver input accepting voltage range -25 V to +25 V. |+| 5 | RIN2 | input | RS-232 receiver input accepting voltage range -25 V to +25 V. |+| 6 | RIN3 | input | RS-232 receiver input accepting voltage range -25 V to +25 V. |+| 7 | RIN4 | input | RS-232 receiver input accepting voltage range -25 V to +25 V. |+| 8 | RIN5 | input | RS-232 receiver input accepting voltage range -25 V to +25 V. |+| 9 | DOUT1 | output | RS-232 driver output with output voltage range -13.2 V to +13.2 V. |+| 10 | DOUT2 | output | RS-232 driver output with output voltage range -13.2 V to +13.2 V. |+| 11 | DOUT3 | output | RS-232 driver output with output voltage range -13.2 V to +13.2 V. |+| 12 | DIN3 | input | Driver input accepting logic voltage 0 V to 5.5 V. |+| 13 | DIN2 | input | Driver input accepting logic voltage 0 V to 5.5 V. |+| 14 | DIN1 | input | Driver input accepting logic voltage 0 V to 5.5 V. |+| 15 | ROUT5 | output | Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V. |+| 16 | ROUT4 | output | Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V. |+| 17 | ROUT3 | output | Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V. |+| 18 | ROUT2 | output | Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V. |+| 19 | ROUT1 | output | Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V. |+| 20 | ROUT2B | output | Always-active noninverting receiver output providing data transmission even when device is powered down. |+| 21 | INVALID | output | Invalid Output Pin that goes high for valid RS-232 signal and low when input voltages remain between -0.3 V and 0.3 V for more than 30 μs. |+| 22 | FORCEOFF | input | Auto Powerdown Control input accepting logic voltage 0 V to 5.5 V for controlling auto-powerdown feature. |+| 23 | FORCEON | input | Auto Powerdown Control input accepting logic voltage 0 V to 5.5 V for controlling auto-powerdown feature. |+| 24 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |+| 25 | GND | power_in | Ground reference (0 V). |+| 26 | VCC | power_in | Positive supply voltage, operating range 3 V to 5.5 V. |+| 27 | V+ | power_out | Positive charge pump output voltage with range -0.3 V to 7 V. |+| 28 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-28-208mil |+| Category | Interface |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `SN65C3243DBR`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)+- 3D model files: `sn65c3243dbr-etched.step` / `sn65c3243dbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65c3243dbr.step` / `sn65c3243dbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn65c3243) (25 pp, sha256 `6f5ef514f6970b14`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn65c3243dbr-datasheet.pdf)
page.jsonadded+261
@@ -0,0 +1,261 @@+{+  "slug": "sn65c3243dbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RS232 ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "sn65c3243dbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn65c3243dbr.kicad_sym",+    "sn65c3243dbr.kicad_mod",+    "sn65c3243dbr.glb",+    "sn65c3243dbr.step",+    "sn65c3243dbr.lbr",+    "docs/hero.png",+    "docs/sn65c3243dbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN65C3243DBR",+    "manufacturer": "Texas Instruments",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Interface",+    "subcategory": "RS232 ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/sn65c3243",+    "parts": {+      "symbol": "sn65c3243dbr.kicad_sym",+      "footprint": "sn65c3243dbr.kicad_mod",+      "model_3d": "sn65c3243dbr-etched.glb",+      "model_3d_plain": "sn65c3243dbr.glb",+      "model_3d_step": "sn65c3243dbr-etched.step",+      "model_3d_step_plain": "sn65c3243dbr.step",+      "lbr": "sn65c3243dbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2671401"+    },+    "pins": [+      {+        "number": "1",+        "name": "C2+",+        "type": "passive",+        "description": "Positive terminal of the voltage-doubler charge-pump capacitor."+      },+      {+        "number": "2",+        "name": "C2-",+        "type": "passive",+        "description": "Negative terminal of the voltage-doubler charge-pump capacitor."+      },+      {+        "number": "3",+        "name": "V-",+        "type": "power_out",+        "description": "Negative charge pump output voltage with range 0.3 V to -7 V."+      },+      {+        "number": "4",+        "name": "RIN1",+        "type": "input",+        "description": "RS-232 receiver input accepting voltage range -25 V to +25 V."+      },+      {+        "number": "5",+        "name": "RIN2",+        "type": "input",+        "description": "RS-232 receiver input accepting voltage range -25 V to +25 V."+      },+      {+        "number": "6",+        "name": "RIN3",+        "type": "input",+        "description": "RS-232 receiver input accepting voltage range -25 V to +25 V."+      },+      {+        "number": "7",+        "name": "RIN4",+        "type": "input",+        "description": "RS-232 receiver input accepting voltage range -25 V to +25 V."+      },+      {+        "number": "8",+        "name": "RIN5",+        "type": "input",+        "description": "RS-232 receiver input accepting voltage range -25 V to +25 V."+      },+      {+        "number": "9",+        "name": "DOUT1",+        "type": "output",+        "description": "RS-232 driver output with output voltage range -13.2 V to +13.2 V."+      },+      {+        "number": "10",+        "name": "DOUT2",+        "type": "output",+        "description": "RS-232 driver output with output voltage range -13.2 V to +13.2 V."+      },+      {+        "number": "11",+        "name": "DOUT3",+        "type": "output",+        "description": "RS-232 driver output with output voltage range -13.2 V to +13.2 V."+      },+      {+        "number": "12",+        "name": "DIN3",+        "type": "input",+        "description": "Driver input accepting logic voltage 0 V to 5.5 V."+      },+      {+        "number": "13",+        "name": "DIN2",+        "type": "input",+        "description": "Driver input accepting logic voltage 0 V to 5.5 V."+      },+      {+        "number": "14",+        "name": "DIN1",+        "type": "input",+        "description": "Driver input accepting logic voltage 0 V to 5.5 V."+      },+      {+        "number": "15",+        "name": "ROUT5",+        "type": "output",+        "description": "Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V."+      },+      {+        "number": "16",+        "name": "ROUT4",+        "type": "output",+        "description": "Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V."+      },+      {+        "number": "17",+        "name": "ROUT3",+        "type": "output",+        "description": "Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V."+      },+      {+        "number": "18",+        "name": "ROUT2",+        "type": "output",+        "description": "Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V."+      },+      {+        "number": "19",+        "name": "ROUT1",+        "type": "output",+        "description": "Receiver output with high-level voltage (VCC - 0.6 V) to (VCC - 0.1 V) and low-level voltage 0.4 V."+      },+      {+        "number": "20",+        "name": "ROUT2B",+        "type": "output",+        "description": "Always-active noninverting receiver output providing data transmission even when device is powered down."+      },+      {+        "number": "21",+        "name": "INVALID",+        "type": "output",+        "description": "Invalid Output Pin that goes high for valid RS-232 signal and low when input voltages remain between -0.3 V and 0.3 V for more than 30 μs."+      },+      {+        "number": "22",+        "name": "FORCEOFF",+        "type": "input",+        "description": "Auto Powerdown Control input accepting logic voltage 0 V to 5.5 V for controlling auto-powerdown feature."+      },+      {+        "number": "23",+        "name": "FORCEON",+        "type": "input",+        "description": "Auto Powerdown Control input accepting logic voltage 0 V to 5.5 V for controlling auto-powerdown feature."+      },+      {+        "number": "24",+        "name": "C1-",+        "type": "passive",+        "description": "Negative terminal of the voltage-doubler charge-pump capacitor."+      },+      {+        "number": "25",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V)."+      },+      {+        "number": "26",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage, operating range 3 V to 5.5 V."+      },+      {+        "number": "27",+        "name": "V+",+        "type": "power_out",+        "description": "Positive charge pump output voltage with range -0.3 V to 7 V."+      },+      {+        "number": "28",+        "name": "C1+",+        "type": "passive",+        "description": "Positive terminal of the voltage-doubler charge-pump capacitor."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 25,+        "cost_usd": 0.2355,+        "at": "2026-09-23T07:10:32"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/sn65c3243",+        "pages": 25,+        "sha256": "6f5ef514f6970b14",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file