← Commit history

sn65c3232epwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·91f47daaef · ·parent cb036e0
2 files changed +97−17
package.json+55−15
@@ -53,7 +53,7 @@         "number": "1",         "name": "C1+",         "type": "passive",-        "description": "Positive terminal of charge-pump flying capacitor C1; external capacitor value is 0.1 \u00b5F at VCC = 3.3 V or 0.047 \u00b5F at VCC = 5 V."+        "description": "Positive terminal of charge-pump flying capacitor C1; external capacitor value is 0.1 µF at VCC = 3.3 V or 0.047 µF at VCC = 5 V."       },       {         "number": "2",@@ -71,7 +71,7 @@         "number": "4",         "name": "C2+",         "type": "passive",-        "description": "Positive terminal of charge-pump flying capacitor C2; external capacitor value is 0.1 \u00b5F at VCC = 3.3 V or 0.33 \u00b5F at VCC = 5 V."+        "description": "Positive terminal of charge-pump flying capacitor C2; external capacitor value is 0.1 µF at VCC = 3.3 V or 0.33 µF at VCC = 5 V."       },       {         "number": "5",@@ -83,67 +83,67 @@         "number": "6",         "name": "V-",         "type": "power_out",-        "description": "Negative charge-pump output for external storage capacitor only; absolute maximum \u22127 V with respect to GND."+        "description": "Negative charge-pump output for external storage capacitor only; absolute maximum −7 V with respect to GND."       },       {         "number": "7",         "name": "DOUT2",         "type": "output",-        "description": "RS-232 channel 2 line driver output to remote RS-232 system; \u00b115-kV HBM and \u00b115-kV IEC 61000-4-2 air-gap ESD protected; VOH \u2265 +5 V, VOL \u2264 \u22125 V into 3 k\u03a9."+        "description": "RS-232 channel 2 line driver output to remote RS-232 system; ±15-kV HBM and ±15-kV IEC 61000-4-2 air-gap ESD protected; VOH ≥ +5 V, VOL ≤ −5 V into 3 kΩ."       },       {         "number": "8",         "name": "RIN2",         "type": "input",-        "description": "RS-232 channel 2 line receiver input from remote RS-232 system; \u00b115-kV HBM and \u00b115-kV IEC 61000-4-2 ESD protected; input range \u00b125 V, internal 3-7 k\u03a9 load."+        "description": "RS-232 channel 2 line receiver input from remote RS-232 system; ±15-kV HBM and ±15-kV IEC 61000-4-2 ESD protected; input range ±25 V, internal 3-7 kΩ load."       },       {         "number": "9",         "name": "ROUT2",         "type": "output",-        "description": "Logic-level receiver channel 2 output to UART; output is high when RIN2 is open or driver is off; VOH \u2265 VCC \u2212 0.6 V at IOH = \u22121 mA."+        "description": "Logic-level receiver channel 2 output to UART; output is high when RIN2 is open or driver is off; VOH ≥ VCC − 0.6 V at IOH = −1 mA."       },       {         "number": "10",         "name": "DIN2",         "type": "input",-        "description": "Logic-level driver channel 2 input from UART; VIH \u2265 2 V (VCC = 3.3 V) or \u2265 2.4 V (VCC = 5 V); VIL \u2264 0.8 V; input range 0 to 5.5 V."+        "description": "Logic-level driver channel 2 input from UART; VIH ≥ 2 V (VCC = 3.3 V) or ≥ 2.4 V (VCC = 5 V); VIL ≤ 0.8 V; input range 0 to 5.5 V."       },       {         "number": "11",         "name": "DIN1",         "type": "input",-        "description": "Logic-level driver channel 1 input from UART; VIH \u2265 2 V (VCC = 3.3 V) or \u2265 2.4 V (VCC = 5 V); VIL \u2264 0.8 V; input range 0 to 5.5 V."+        "description": "Logic-level driver channel 1 input from UART; VIH ≥ 2 V (VCC = 3.3 V) or ≥ 2.4 V (VCC = 5 V); VIL ≤ 0.8 V; input range 0 to 5.5 V."       },       {         "number": "12",         "name": "ROUT1",         "type": "output",-        "description": "Logic-level receiver channel 1 output to UART; output is high when RIN1 is open or driver is off; VOH \u2265 VCC \u2212 0.6 V at IOH = \u22121 mA."+        "description": "Logic-level receiver channel 1 output to UART; output is high when RIN1 is open or driver is off; VOH ≥ VCC − 0.6 V at IOH = −1 mA."       },       {         "number": "13",         "name": "RIN1",         "type": "input",-        "description": "RS-232 channel 1 line receiver input from remote RS-232 system; \u00b115-kV HBM and \u00b115-kV IEC 61000-4-2 ESD protected; input range \u00b125 V, internal 3-7 k\u03a9 load."+        "description": "RS-232 channel 1 line receiver input from remote RS-232 system; ±15-kV HBM and ±15-kV IEC 61000-4-2 ESD protected; input range ±25 V, internal 3-7 kΩ load."       },       {         "number": "14",         "name": "DOUT1",         "type": "output",-        "description": "RS-232 channel 1 line driver output to remote RS-232 system; \u00b115-kV HBM and \u00b115-kV IEC 61000-4-2 air-gap ESD protected; VOH \u2265 +5 V, VOL \u2264 \u22125 V into 3 k\u03a9."+        "description": "RS-232 channel 1 line driver output to remote RS-232 system; ±15-kV HBM and ±15-kV IEC 61000-4-2 air-gap ESD protected; VOH ≥ +5 V, VOL ≤ −5 V into 3 kΩ."       },       {         "number": "15",         "name": "GND",         "type": "power_in",-        "description": "Ground reference for all voltages; included in pin-to-pin \u00b115-kV IEC ESD protection domain; 1 \u00b5F bypass capacitor between VCC and GND required for IEC ESD compliance."+        "description": "Ground reference for all voltages; included in pin-to-pin ±15-kV IEC ESD protection domain; 1 µF bypass capacitor between VCC and GND required for IEC ESD compliance."       },       {         "number": "16",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage; recommended operating range 3 V to 5.5 V; typical ICC = 300 \u00b5A, maximum ICC = 1 mA with no load."+        "description": "Supply voltage; recommended operating range 3 V to 5.5 V; typical ICC = 300 µA, maximum ICC = 1 mA with no load."       }     ],     "provenance": {@@ -178,6 +178,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "sn65c3232epwr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "sn65c3232epwr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "90e121ea80df7bc56aec6a614424a8d57531d9e2649a802dcb58f29040249a66",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -163,7 +163,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "sn65c3232epwr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "sn65c3232epwr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "90e121ea80df7bc56aec6a614424a8d57531d9e2649a802dcb58f29040249a66",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -211,4 +251,4 @@     "public": true   },   "updated_at": "2026-09-25T06:22:29.186Z"-}\ No newline at end of file+}