component
SLM6600
Public Made by Adomby adom
SOLA IC Battery Management, SOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -37,6 +37,20 @@ SLM6600 from SOLA IC, in a SOP-8-EP. Pinout and pin descriptions extracted from - Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm` - 3D model: SOP-8-EP (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`slm6600.step`](slm6600.step) | 122 KB | You want the bare part, or you mark your own boards. |+| [`slm6600-etched.step`](slm6600-etched.step) | 1.9 MB | You want the part with `SLM6600` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 452 faces against 147 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "slm6600",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "SOLA IC Battery Management, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+11−11@@ -4,7 +4,7 @@ "slug": "slm6600", "title": "SLM6600", "brief": "SOLA IC Battery Management, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,25 +34,25 @@ "number": "1", "name": "VCC", "type": "power_in",- "description": "Positive input supply voltage (4V to 6V, typ. 5V). Provides power to the internal circuit. When VCC drops within 30mV of BAT pin voltage, the SLM6600(S) enters low-power mode dropping IBAT to less than 2\u00b5A. Under-voltage lockout threshold is ~4V."+ "description": "Positive input supply voltage (4V to 6V, typ. 5V). Provides power to the internal circuit. When VCC drops within 30mV of BAT pin voltage, the SLM6600(S) enters low-power mode dropping IBAT to less than 2µA. Under-voltage lockout threshold is ~4V." }, { "number": "2", "name": "PROG", "type": "input",- "description": "Charge current program pin. The charge current is programmed by connecting a 1% resistor RPROG (RPI) between PROG and GND. Example: 225\u03a9 \u2192 3A, 186\u03a9 \u2192 3.5A, 968\u03a9 \u2192 1A."+ "description": "Charge current program pin. The charge current is programmed by connecting a 1% resistor RPROG (RPI) between PROG and GND. Example: 225Ω → 3A, 186Ω → 3.5A, 968Ω → 1A." }, { "number": "3", "name": "NSTDBY", "type": "output",- "description": "Open-drain charge-terminated (standby) status output. Pulled low by an internal switch when battery charge is terminated (battery full). Otherwise high impedance. Typically drives a green LED. VOL \u2264 0.6V at 5mA."+ "description": "Open-drain charge-terminated (standby) status output. Pulled low by an internal switch when battery charge is terminated (battery full). Otherwise high impedance. Typically drives a green LED. VOL ≤ 0.6V at 5mA." }, { "number": "4", "name": "NCHRG", "type": "output",- "description": "Open-drain charge status output. Pulled low by an internal switch while the battery is charging. Otherwise high impedance. Typically drives a red LED. VOL \u2264 0.6V at 5mA."+ "description": "Open-drain charge status output. Pulled low by an internal switch while the battery is charging. Otherwise high impedance. Typically drives a red LED. VOL ≤ 0.6V at 5mA." }, { "number": "5",@@ -64,7 +64,7 @@ "number": "6", "name": "BAT", "type": "power_out",- "description": "Battery connection pin. Connect the positive terminal of the Li-Ion battery here. Provides regulated 4.2V float voltage (\u00b11%) and charge current up to 3A (3.5A max). Draws <2\u00b5A in disable/sleep mode."+ "description": "Battery connection pin. Connect the positive terminal of the Li-Ion battery here. Provides regulated 4.2V float voltage (±1%) and charge current up to 3A (3.5A max). Draws <2µA in disable/sleep mode." }, { "number": "7",@@ -76,7 +76,7 @@ "number": "8", "name": "LX", "type": "output",- "description": "Switching node - external inductor connection. Output of the internal synchronous buck power stage (P-FET/N-FET, RDS(on) ~50m\u03a9 each) switching at 0.8MHz. Connect a 2.2\u00b5H-10\u00b5H inductor (3.3\u00b5H recommended for 3A) between LX and the BAT-side output capacitor."+ "description": "Switching node - external inductor connection. Output of the internal synchronous buck power stage (P-FET/N-FET, RDS(on) ~50mΩ each) switching at 0.8MHz. Connect a 2.2µH-10µH inductor (3.3µH recommended for 3A) between LX and the BAT-side output capacitor." } ], "provenance": {@@ -150,9 +150,9 @@ "docs/hero.png", "docs/slm6600-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "SOLA IC Battery Management, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D." }