component
SL1045
Public Made by Adomby adom
MDD（Microdiode Electronics） Schottky Barrier Diodes (SBD), TO-277. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+2426
README.mdadded+57@@ -0,0 +1,57 @@+# SL1045++**MDD（Microdiode Electronics）** · Schottky Barrier Diodes (SBD) · TO-277++SL1045 from MDD（Microdiode Electronics）, in a TO-277. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A | passive | Anode, left pin; connected to the same anode as the right pin per the pin diagram. |+| 2 | A | passive | Anode, right pin; connected to the same anode as the left pin per the pin diagram. |+| 3 | K | passive | Cathode, the bottom-side heat sink tab, which is the thermal pad (the datasheet's thermal-resistance test uses an 18.8 x 14.4 mm cathode pad). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MDD（Microdiode Electronics） |+| Package | TO-277 |+| Category | Diodes |+| Pins | 3 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Maximum repetitive peak reverse voltage | VRRM | | | 45 | V | | 1 |+| RMS reverse voltage | VRMS | | | 32 | V | | 1 |+| Average rectified output current | I(O) | | | 10 | A | | 1 |+| Non-repetitive peak forward surge current | IFSM | | | 175 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC method) | 1 |+| Forward voltage drop | vF | | 0.44 | 0.48 | V | at 10A | 1 |+| Peak reverse current at rated DC blocking voltage | IR | | 100 | 200 | uA | TA=25℃ | 1 |+| Peak reverse current at rated DC blocking voltage | IR | | 10 | 20 | mA | TA=100℃ | 1 |+| Operating junction storage temperature range | TJ | -55 | | 150 | ℃ | | 1 |+| Storage temperature range | TSTG | -55 | | 150 | ℃ | | 1 |+| Typical thermal resistance | RθJA | | 65 | | ℃/W | note 2: polymide PCB, 2oz. copper | 1 |+| Typical junction capacitance | CJ | | 1200 | | pF | measured at 1.0 MHz, applied reverse voltage 4.0Vdc (note 1) | 1 |++## CAD (KiCad official)++- Symbol: `SL1045`+- Footprint: `Package_TO_SOT_SMD:TO-277A`+- 3D model: TO-277 (KiCad packages3D, STEP)+- 3D model files: `sl1045-etched.step` / `sl1045-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl1045.step` / `sl1045.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MDD（Microdiode Electronics） datasheet](docs/sl1045-datasheet.pdf) (4 pp, sha256 `bd12aa343698523f`, retrieved 2026-10-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sl1045-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/sl1045-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+165@@ -0,0 +1,165 @@+{+ "slug": "sl1045",+ "version": "0.1.0",+ "type": "component",+ "description": "MDD（Microdiode Electronics） Schottky Barrier Diodes (SBD), TO-277. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "diodes",+ "sl1045",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sl1045.kicad_sym",+ "sl1045.kicad_mod",+ "sl1045.glb",+ "sl1045.step",+ "sl1045.lbr",+ "docs/hero.png",+ "docs/sl1045-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sl1045-hero.glb",+ "sl1045-hero.overlay.json",+ "sl1045-etched.glb"+ ],+ "component": {+ "mpn": "SL1045",+ "manufacturer": "MDD（Microdiode Electronics）",+ "package": "TO-277",+ "pin_count": 3,+ "category": "Diodes",+ "subcategory": "Schottky Barrier Diodes (SBD)",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/36a16fa42971aa1669551f0ccfef7fa1.pdf",+ "parts": {+ "symbol": "sl1045.kicad_sym",+ "footprint": "sl1045.kicad_mod",+ "model_3d": "sl1045-hero.glb",+ "model_3d_plain": "sl1045-etched.glb",+ "model_3d_step": "sl1045-etched.step",+ "model_3d_step_plain": "sl1045.step",+ "lbr": "sl1045.lbr"+ },+ "distributor_links": {+ "lcsc": "C41424783",+ "digikey": "6557-SL1045TR-ND"+ },+ "distributor_check": {+ "checked_at": "2026-10-21T05:14:22Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "6557-SL1045TR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "A",+ "type": "passive",+ "description": "Anode, left pin; connected to the same anode as the right pin per the pin diagram."+ },+ {+ "number": "2",+ "name": "A",+ "type": "passive",+ "description": "Anode, right pin; connected to the same anode as the left pin per the pin diagram."+ },+ {+ "number": "3",+ "name": "K",+ "type": "passive",+ "description": "Cathode, the bottom-side heat sink tab, which is the thermal pad (the datasheet's thermal-resistance test uses an 18.8 x 14.4 mm cathode pad)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet prints no pin numbers. The diagram only labels LEFT PIN and RIGHT PIN (both anode) and",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 4,+ "cost_usd": 0.0968,+ "at": "2026-10-21T05:10:28"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/36a16fa42971aa1669551f0ccfef7fa1.pdf",+ "pages": 4,+ "sha256": "bd12aa343698523f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sl1045.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.6,+ 6.5,+ 1.22+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "69a9aa5a47db4a2792452bac34f2cad6cb0c5d3a4713f4b3c03b779f23d194ed",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sl1045-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.6,+ 6.5,+ 1.22+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6d540dd93b18d9bcbbe8b2fab1e854d78d3e321d68d87dc82b939a93deeddfac",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+171@@ -0,0 +1,171 @@+{+ "slug": "sl1045",+ "version": "0.1.0",+ "type": "component",+ "description": "MDD（Microdiode Electronics） Schottky Barrier Diodes (SBD), TO-277. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "diodes",+ "sl1045",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sl1045.kicad_sym",+ "sl1045.kicad_mod",+ "sl1045.glb",+ "sl1045.step",+ "sl1045.lbr",+ "docs/hero.png",+ "docs/sl1045-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sl1045-hero.glb",+ "sl1045-hero.overlay.json",+ "sl1045-etched.glb"+ ],+ "component": {+ "mpn": "SL1045",+ "manufacturer": "MDD（Microdiode Electronics）",+ "package": "TO-277",+ "pin_count": 3,+ "category": "Diodes",+ "subcategory": "Schottky Barrier Diodes (SBD)",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/36a16fa42971aa1669551f0ccfef7fa1.pdf",+ "parts": {+ "symbol": "sl1045.kicad_sym",+ "footprint": "sl1045.kicad_mod",+ "model_3d": "sl1045-hero.glb",+ "model_3d_plain": "sl1045-etched.glb",+ "model_3d_step": "sl1045-etched.step",+ "model_3d_step_plain": "sl1045.step",+ "lbr": "sl1045.lbr"+ },+ "distributor_links": {+ "lcsc": "C41424783",+ "digikey": "6557-SL1045TR-ND"+ },+ "distributor_check": {+ "checked_at": "2026-10-21T05:14:22Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "6557-SL1045TR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "A",+ "type": "passive",+ "description": "Anode, left pin; connected to the same anode as the right pin per the pin diagram."+ },+ {+ "number": "2",+ "name": "A",+ "type": "passive",+ "description": "Anode, right pin; connected to the same anode as the left pin per the pin diagram."+ },+ {+ "number": "3",+ "name": "K",+ "type": "passive",+ "description": "Cathode, the bottom-side heat sink tab, which is the thermal pad (the datasheet's thermal-resistance test uses an 18.8 x 14.4 mm cathode pad)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet prints no pin numbers. The diagram only labels LEFT PIN and RIGHT PIN (both anode) and",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 4,+ "cost_usd": 0.0968,+ "at": "2026-10-21T05:10:28"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/36a16fa42971aa1669551f0ccfef7fa1.pdf",+ "pages": 4,+ "sha256": "bd12aa343698523f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sl1045.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.6,+ 6.5,+ 1.22+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "69a9aa5a47db4a2792452bac34f2cad6cb0c5d3a4713f4b3c03b779f23d194ed",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sl1045-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.6,+ 6.5,+ 1.22+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6d540dd93b18d9bcbbe8b2fab1e854d78d3e321d68d87dc82b939a93deeddfac",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
sl1045-etched.glbadded⋯ 1 unchanged line ⋯
sl1045-hero.glbadded⋯ 1 unchanged line ⋯
sl1045-hero.overlay.jsonadded+150@@ -0,0 +1,150 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "SL1045",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 3,+ "span_mm": 8.525,+ "dash_mm": 0.2131,+ "gap_mm": 0.1279,+ "pad_stroke_mm": 0.0512+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 4,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 3,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.544,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.3,+ 2.3,+ -3.25,+ 3.25+ ],+ "pads_bbox_mm": [+ -2.4,+ 2.4,+ -3.4,+ 3.4+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "sl1045-etched.glb",+ "glb_sha256": "5ca88595db48124060d02aa1ac46b95737c4bae524ffe7477f2d7c9ae5968707",+ "footprint": "sl1045.kicad_mod",+ "footprint_sha256": "79d0898cf3133a3b0bad05fb6b9f37c8bd2445e7c20b1d9ff12a4ed4be0bb18b",+ "pins": "page.json component.pins",+ "pins_sha256": "2bdad4dcaf07e4bd992ee6df2848836e5325b4636aefe73ebe8ecadf847ef6fc"+ },+ "generator": "adom-wiki 1.7.76 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "A",+ "x": -1.89,+ "y": -2.765,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "A",+ "x": 1.89,+ "y": -2.765,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "K",+ "x": 0.0,+ "y": 3.55,+ "align": "right",+ "vertical": true,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -1.04,+ -2.765+ ],+ "size_mm": [+ 1.4,+ 1.27+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ 1.04,+ -2.765+ ],+ "size_mm": [+ 1.4,+ 1.27+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 1.04+ ],+ "size_mm": [+ 4.8,+ 4.72+ ],+ "rot": 0.0+ }+ ]+}
sl1045.glbadded⋯ 1 unchanged line ⋯
sl1045.kicad_modadded+296@@ -0,0 +1,296 @@+(footprint "TO-277A"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "Thermal enhanced ultra thin SMD package; 3 leads; body: 4.3x6.1x0.43mm, https://www.vishay.com/docs/95570/to-277asmpc.pdf")+ (tags "TO-277A SMPC")+ (property "Reference" "REF**"+ (at 0 -4.5 180)+ (layer "F.SilkS")+ (uuid "5f76ecc3-172a-4ec7-925e-4292bd6af81f")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "TO-277A"+ (at 0 4.5 180)+ (layer "F.Fab")+ (uuid "2c166592-59d6-41d2-af2f-744e194717ad")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "a7a4abfc-dd74-49d6-bd08-8a29cb8c67e9")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "a2f0f0d8-ee47-41a9-8903-03cacd111272")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -2.26 -2.87)+ (end -2.26 -1.6)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "5261dd93-f9a5-46a8-b35e-cd3bd92e6af0")+ )+ (fp_line+ (start 2.26 -3.16)+ (end 2.02 -3.16)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "8b590cd5-5ede-42f6-bdbe-f04b56f43eea")+ )+ (fp_line+ (start 2.26 -3.16)+ (end 2.26 -1.6)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "d39c484e-0c2b-4658-a9ce-ebfa315258ea")+ )+ (fp_poly+ (pts+ (xy -2 -3.19) (xy -2.28 -3.19) (xy -2 -3.47) (xy -2 -3.19)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "ca99a29e-500a-4bb5-ba8a-e9c4394ac40e")+ )+ (fp_line+ (start -2.65 -3.65)+ (end -2.65 3.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "7c2a3979-1990-4f85-83f7-9308b6bfef8f")+ )+ (fp_line+ (start -2.65 -3.65)+ (end 2.65 -3.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "04d19638-f3bb-490b-9017-504a76b380cb")+ )+ (fp_line+ (start 2.65 3.65)+ (end -2.65 3.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "78c7fd21-d56a-4bd3-a317-2b58250f2e5a")+ )+ (fp_line+ (start 2.65 3.65)+ (end 2.65 -3.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "fcb362f9-4944-4c76-8321-8430b224399c")+ )+ (fp_line+ (start -2.15 -2.05)+ (end -2.15 3.05)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "b3d4e1d0-4203-49f9-9704-f3ae82b43a42")+ )+ (fp_line+ (start -2.15 3.05)+ (end 2.15 3.05)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "5628382b-7c19-4b60-8ee0-d27ced7f98c8")+ )+ (fp_line+ (start -1.15 -3.05)+ (end -2.15 -2.05)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "acf83a37-14ca-4fd5-a613-d60b1c23eac2")+ )+ (fp_line+ (start 2.15 -3.05)+ (end -1.15 -3.05)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "1c95d994-4f97-4e75-93d2-6d56ce882003")+ )+ (fp_line+ (start 2.15 3.05)+ (end 2.15 -3.05)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "967c7cb0-cf8c-43dc-8c43-7fde85435935")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (uuid "5f339899-1b21-4f59-bfc0-2e2e795d70e9")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "" smd roundrect+ (at -1.7 -0.65 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "d8414711-4473-49c6-bc29-507983e45fdb")+ )+ (pad "" smd roundrect+ (at -1.7 1.04 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "642d299d-003e-4bf4-8920-08106024409b")+ )+ (pad "" smd roundrect+ (at -1.7 2.7 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "c031989d-2fc2-4a95-8634-6163efc6a4d7")+ )+ (pad "" smd roundrect+ (at 0 -0.65 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "4f9c44b8-c363-4131-ab4d-d6baa9839b7d")+ )+ (pad "" smd roundrect+ (at 0 1.04 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "bedd7336-c642-4e17-af06-a45740092048")+ )+ (pad "" smd roundrect+ (at 0 2.7 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "0a6af149-35d7-47cf-b410-491563b7d0ab")+ )+ (pad "" smd roundrect+ (at 1.7 -0.65 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "55589969-10d9-4229-af9a-4b4189374960")+ )+ (pad "" smd roundrect+ (at 1.7 1.04 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "5d2b7c38-5533-45e7-b395-29ac9e18787e")+ )+ (pad "" smd roundrect+ (at 1.7 2.7 180)+ (size 1.25 1.2)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "3f4520d6-17f9-4b03-a6eb-ad4198236d04")+ )+ (pad "1" smd roundrect+ (at -1.04 -2.765)+ (size 1.4 1.27)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "2d31758f-9d8e-4e6e-bb68-ea33b59eb696")+ )+ (pad "2" smd roundrect+ (at 1.04 -2.765)+ (size 1.4 1.27)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ (uuid "642f2fa0-b6c1-45a4-9ee4-f504d5e1be96")+ )+ (pad "3" smd rect+ (at 0 1.04)+ (size 4.8 4.72)+ (layers "F.Cu" "F.Mask")+ (uuid "a3475dce-3c29-4a07-958d-4fb9af041805")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/TO-277A.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
sl1045.kicad_symadded+25@@ -0,0 +1,25 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "SL1045" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 5.08 0) (effects (font (size 1.27 1.27))))+ (property "Value" "SL1045" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "SL1045_0_1"+ (rectangle (start -12.70 2.54) (end 12.70 -5.08)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "SL1045_1_1"+ (pin passive line (at -17.78 0.00 0) (length 5.08)+ (name "A" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at -17.78 -2.54 0) (length 5.08)+ (name "A" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 0.00 180) (length 5.08)+ (name "K" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
sl1045.lbradded+111@@ -0,0 +1,111 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TO-277A">+ <description>3 pads, 4.8 x 6.8 mm. Thermal enhanced ultra thin SMD package; 3 leads; body: 4.3x6.1x0.43mm</description>+ <smd name="1" x="-1.0400" y="2.7650" dx="1.4000" dy="1.2700" layer="1" roundness="50"/>+ <smd name="2" x="1.0400" y="2.7650" dx="1.4000" dy="1.2700" layer="1" roundness="50"/>+ <smd name="3" x="0.0000" y="-1.0400" dx="4.8000" dy="4.7200" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.0000" y="3.1900"/>+ <vertex x="-2.2800" y="3.1900"/>+ <vertex x="-2.0000" y="3.4700"/>+ <vertex x="-2.0000" y="3.1900"/>+ </polygon>+ <wire x1="-2.2600" y1="2.8700" x2="-2.2600" y2="1.6000" width="0.1200" layer="21"/>+ <wire x1="2.2600" y1="3.1600" x2="2.0200" y2="3.1600" width="0.1200" layer="21"/>+ <wire x1="2.2600" y1="3.1600" x2="2.2600" y2="1.6000" width="0.1200" layer="21"/>+ <wire x1="-2.1500" y1="2.0500" x2="-2.1500" y2="-3.0500" width="0.1000" layer="51"/>+ <wire x1="-2.1500" y1="-3.0500" x2="2.1500" y2="-3.0500" width="0.1000" layer="51"/>+ <wire x1="-1.1500" y1="3.0500" x2="-2.1500" y2="2.0500" width="0.1000" layer="51"/>+ <wire x1="2.1500" y1="3.0500" x2="-1.1500" y2="3.0500" width="0.1000" layer="51"/>+ <wire x1="2.1500" y1="-3.0500" x2="2.1500" y2="3.0500" width="0.1000" layer="51"/>+ <text x="0" y="4.065" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-4.040" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="SL1045">+ <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+ <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+ <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="A" x="-17.78" y="0" length="middle" direction="pas"/>+ <pin name="A@2" x="-17.78" y="-2.54" length="middle" direction="pas"/>+ <pin name="K" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="SL1045" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="SL1045" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="TO-277A">+ <connects>+ <connect gate="G$1" pin="A" pad="1"/>+ <connect gate="G$1" pin="A@2" pad="2"/>+ <connect gate="G$1" pin="K" pad="3"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
sl1045.stepadded+1449@@ -0,0 +1,1449 @@+ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('FreeCAD Model'),'2;1'); +FILE_NAME('C:\\Cadence\\SPB_Data\\TO_277A_sp.step','2018-01-29T11:11:51' + ,('kicad StepUp'),('ksu MCAD'),'Open CASCADE STEP processor 7.1', + 'FreeCAD','Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('TO_277A_sp','TO_277A_sp','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#1155); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#57,#104,#128,#216,#249,#305,#361,#387,#411, + #458,#482,#522,#546,#570,#601,#618,#630,#654,#673,#706,#787,#845, + #857,#869,#909,#933,#966,#1006,#1030,#1063,#1080,#1097,#1114,#1126, + #1143)); +#17 = ADVANCED_FACE('',(#18),#52,.F.); +#18 = FACE_BOUND('',#19,.T.); +#19 = EDGE_LOOP('',(#20,#30,#38,#46)); +#20 = ORIENTED_EDGE('',*,*,#21,.F.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-1.775,-2.59,2.E-002)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-1.025,-2.59,2.E-002)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-1.775,-2.59,2.E-002)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(1.,0.E+000,0.E+000)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#22,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(-1.775,-2.59,0.E+000)); +#34 = LINE('',#35,#36); +#35 = CARTESIAN_POINT('',(-1.775,-2.59,0.25)); +#36 = VECTOR('',#37,1.); +#37 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#38 = ORIENTED_EDGE('',*,*,#39,.T.); +#39 = EDGE_CURVE('',#32,#40,#42,.T.); +#40 = VERTEX_POINT('',#41); +#41 = CARTESIAN_POINT('',(-1.025,-2.59,0.E+000)); +#42 = LINE('',#43,#44); +#43 = CARTESIAN_POINT('',(-1.775,-2.59,0.E+000)); +#44 = VECTOR('',#45,1.); +#45 = DIRECTION('',(1.,0.E+000,0.E+000)); +#46 = ORIENTED_EDGE('',*,*,#47,.F.); +#47 = EDGE_CURVE('',#24,#40,#48,.T.); +#48 = LINE('',#49,#50); +#49 = CARTESIAN_POINT('',(-1.025,-2.59,0.25)); +#50 = VECTOR('',#51,1.); +#51 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#52 = PLANE('',#53); +#53 = AXIS2_PLACEMENT_3D('',#54,#55,#56); +#54 = CARTESIAN_POINT('',(-1.775,-2.59,0.25)); +#55 = DIRECTION('',(0.E+000,1.,0.E+000)); +#56 = DIRECTION('',(0.E+000,0.E+000,1.)); +#57 = ADVANCED_FACE('',(#58),#99,.F.); +#58 = FACE_BOUND('',#59,.T.); +#59 = EDGE_LOOP('',(#60,#70,#78,#86,#92,#93)); +#60 = ORIENTED_EDGE('',*,*,#61,.T.); +#61 = EDGE_CURVE('',#62,#64,#66,.T.); +#62 = VERTEX_POINT('',#63); +#63 = CARTESIAN_POINT('',(-1.025,-3.041183650965,2.E-002)); +#64 = VERTEX_POINT('',#65); +#65 = CARTESIAN_POINT('',(-2.141183650965,-3.041183650965,2.E-002)); +#66 = LINE('',#67,#68); +#67 = CARTESIAN_POINT('',(0.E+000,-3.041183650965,2.E-002)); +#68 = VECTOR('',#69,1.); +#69 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#70 = ORIENTED_EDGE('',*,*,#71,.T.); +#71 = EDGE_CURVE('',#64,#72,#74,.T.); +#72 = VERTEX_POINT('',#73); +#73 = CARTESIAN_POINT('',(-2.141183650965,0.6,2.E-002)); +#74 = LINE('',#75,#76); +#75 = CARTESIAN_POINT('',(-2.141183650965,0.E+000,2.E-002)); +#76 = VECTOR('',#77,1.); +#77 = DIRECTION('',(0.E+000,1.,0.E+000)); +#78 = ORIENTED_EDGE('',*,*,#79,.T.); +#79 = EDGE_CURVE('',#72,#80,#82,.T.); +#80 = VERTEX_POINT('',#81); +#81 = CARTESIAN_POINT('',(-1.775,0.6,2.E-002)); +#82 = LINE('',#83,#84); +#83 = CARTESIAN_POINT('',(-1.775,0.6,2.E-002)); +#84 = VECTOR('',#85,1.); +#85 = DIRECTION('',(1.,2.06514699521E-016,0.E+000)); +#86 = ORIENTED_EDGE('',*,*,#87,.T.); +#87 = EDGE_CURVE('',#80,#22,#88,.T.); +#88 = LINE('',#89,#90); +#89 = CARTESIAN_POINT('',(-1.775,0.6,2.E-002)); +#90 = VECTOR('',#91,1.); +#91 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#92 = ORIENTED_EDGE('',*,*,#21,.T.); +#93 = ORIENTED_EDGE('',*,*,#94,.T.); +#94 = EDGE_CURVE('',#24,#62,#95,.T.); +#95 = LINE('',#96,#97); +#96 = CARTESIAN_POINT('',(-1.025,-2.59,2.E-002)); +#97 = VECTOR('',#98,1.); +#98 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#99 = PLANE('',#100); +#100 = AXIS2_PLACEMENT_3D('',#101,#102,#103); +#101 = CARTESIAN_POINT('',(0.E+000,0.E+000,2.E-002)); +#102 = DIRECTION('',(0.E+000,0.E+000,1.)); +#103 = DIRECTION('',(1.,0.E+000,0.E+000)); +#104 = ADVANCED_FACE('',(#105),#123,.F.); +#105 = FACE_BOUND('',#106,.T.); +#106 = EDGE_LOOP('',(#107,#108,#116,#122)); +#107 = ORIENTED_EDGE('',*,*,#87,.F.); +#108 = ORIENTED_EDGE('',*,*,#109,.T.); +#109 = EDGE_CURVE('',#80,#110,#112,.T.); +#110 = VERTEX_POINT('',#111); +#111 = CARTESIAN_POINT('',(-1.775,0.6,0.E+000)); +#112 = LINE('',#113,#114); +#113 = CARTESIAN_POINT('',(-1.775,0.6,0.25)); +#114 = VECTOR('',#115,1.); +#115 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#116 = ORIENTED_EDGE('',*,*,#117,.T.); +#117 = EDGE_CURVE('',#110,#32,#118,.T.); +#118 = LINE('',#119,#120); +#119 = CARTESIAN_POINT('',(-1.775,0.6,0.E+000)); +#120 = VECTOR('',#121,1.); +#121 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#122 = ORIENTED_EDGE('',*,*,#31,.F.); +#123 = PLANE('',#124); +#124 = AXIS2_PLACEMENT_3D('',#125,#126,#127); +#125 = CARTESIAN_POINT('',(-1.775,0.6,0.25)); +#126 = DIRECTION('',(1.,0.E+000,0.E+000)); +#127 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#128 = ADVANCED_FACE('',(#129),#211,.T.); +#129 = FACE_BOUND('',#130,.T.); +#130 = EDGE_LOOP('',(#131,#132,#133,#141,#149,#157,#165,#173,#181,#189, + #197,#205)); +#131 = ORIENTED_EDGE('',*,*,#39,.F.); +#132 = ORIENTED_EDGE('',*,*,#117,.F.); +#133 = ORIENTED_EDGE('',*,*,#134,.F.); +#134 = EDGE_CURVE('',#135,#110,#137,.T.); +#135 = VERTEX_POINT('',#136); +#136 = CARTESIAN_POINT('',(-2.3,0.6,0.E+000)); +#137 = LINE('',#138,#139); +#138 = CARTESIAN_POINT('',(-1.775,0.6,0.E+000)); +#139 = VECTOR('',#140,1.); +#140 = DIRECTION('',(1.,2.06514699521E-016,0.E+000)); +#141 = ORIENTED_EDGE('',*,*,#142,.F.); +#142 = EDGE_CURVE('',#143,#135,#145,.T.); +#143 = VERTEX_POINT('',#144); +#144 = CARTESIAN_POINT('',(-2.3,1.35,0.E+000)); +#145 = LINE('',#146,#147); +#146 = CARTESIAN_POINT('',(-2.3,1.35,0.E+000)); +#147 = VECTOR('',#148,1.); +#148 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#149 = ORIENTED_EDGE('',*,*,#150,.F.); +#150 = EDGE_CURVE('',#151,#143,#153,.T.); +#151 = VERTEX_POINT('',#152); +#152 = CARTESIAN_POINT('',(2.3,1.35,0.E+000)); +#153 = LINE('',#154,#155); +#154 = CARTESIAN_POINT('',(-2.3,1.35,0.E+000)); +#155 = VECTOR('',#156,1.); +#156 = DIRECTION('',(-1.,-0.E+000,-0.E+000)); +#157 = ORIENTED_EDGE('',*,*,#158,.F.); +#158 = EDGE_CURVE('',#159,#151,#161,.T.); +#159 = VERTEX_POINT('',#160); +#160 = CARTESIAN_POINT('',(2.3,0.6,0.E+000)); +#161 = LINE('',#162,#163); +#162 = CARTESIAN_POINT('',(2.3,1.35,0.E+000)); +#163 = VECTOR('',#164,1.); +#164 = DIRECTION('',(0.E+000,1.,0.E+000)); +#165 = ORIENTED_EDGE('',*,*,#166,.F.); +#166 = EDGE_CURVE('',#167,#159,#169,.T.); +#167 = VERTEX_POINT('',#168); +#168 = CARTESIAN_POINT('',(1.775,0.6,0.E+000)); +#169 = LINE('',#170,#171); +#170 = CARTESIAN_POINT('',(1.775,0.6,0.E+000)); +#171 = VECTOR('',#172,1.); +#172 = DIRECTION('',(1.,0.E+000,0.E+000)); +#173 = ORIENTED_EDGE('',*,*,#174,.F.); +#174 = EDGE_CURVE('',#175,#167,#177,.T.); +#175 = VERTEX_POINT('',#176); +#176 = CARTESIAN_POINT('',(1.775,-2.59,0.E+000)); +#177 = LINE('',#178,#179); +#178 = CARTESIAN_POINT('',(1.775,-2.59,0.E+000)); +#179 = VECTOR('',#180,1.); +#180 = DIRECTION('',(0.E+000,1.,0.E+000)); +#181 = ORIENTED_EDGE('',*,*,#182,.F.); +#182 = EDGE_CURVE('',#183,#175,#185,.T.); +#183 = VERTEX_POINT('',#184); +#184 = CARTESIAN_POINT('',(1.025,-2.59,0.E+000)); +#185 = LINE('',#186,#187); +#186 = CARTESIAN_POINT('',(1.025,-2.59,0.E+000)); +#187 = VECTOR('',#188,1.); +#188 = DIRECTION('',(1.,0.E+000,0.E+000)); +#189 = ORIENTED_EDGE('',*,*,#190,.F.); +#190 = EDGE_CURVE('',#191,#183,#193,.T.); +#191 = VERTEX_POINT('',#192); +#192 = CARTESIAN_POINT('',(1.025,-3.25,0.E+000)); +#193 = LINE('',#194,#195); +#194 = CARTESIAN_POINT('',(1.025,-3.25,0.E+000)); +#195 = VECTOR('',#196,1.); +#196 = DIRECTION('',(0.E+000,1.,0.E+000)); +#197 = ORIENTED_EDGE('',*,*,#198,.F.); +#198 = EDGE_CURVE('',#199,#191,#201,.T.); +#199 = VERTEX_POINT('',#200); +#200 = CARTESIAN_POINT('',(-1.025,-3.25,0.E+000)); +#201 = LINE('',#202,#203); +#202 = CARTESIAN_POINT('',(-1.025,-3.25,0.E+000)); +#203 = VECTOR('',#204,1.); +#204 = DIRECTION('',(1.,0.E+000,0.E+000)); +#205 = ORIENTED_EDGE('',*,*,#206,.F.); +#206 = EDGE_CURVE('',#40,#199,#207,.T.); +#207 = LINE('',#208,#209); +#208 = CARTESIAN_POINT('',(-1.025,-2.59,0.E+000)); +#209 = VECTOR('',#210,1.); +#210 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#211 = PLANE('',#212); +#212 = AXIS2_PLACEMENT_3D('',#213,#214,#215); +#213 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#214 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#215 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#216 = ADVANCED_FACE('',(#217),#244,.F.); +#217 = FACE_BOUND('',#218,.T.); +#218 = EDGE_LOOP('',(#219,#229,#235,#236,#237,#238)); +#219 = ORIENTED_EDGE('',*,*,#220,.F.); +#220 = EDGE_CURVE('',#221,#223,#225,.T.); +#221 = VERTEX_POINT('',#222); +#222 = CARTESIAN_POINT('',(-1.025,-3.000628445402,0.25)); +#223 = VERTEX_POINT('',#224); +#224 = CARTESIAN_POINT('',(-1.025,-3.25,0.25)); +#225 = LINE('',#226,#227); +#226 = CARTESIAN_POINT('',(-1.025,-2.59,0.25)); +#227 = VECTOR('',#228,1.); +#228 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#229 = ORIENTED_EDGE('',*,*,#230,.T.); +#230 = EDGE_CURVE('',#221,#62,#231,.T.); +#231 = LINE('',#232,#233); +#232 = CARTESIAN_POINT('',(-1.025,-2.988246482715,0.320221599875)); +#233 = VECTOR('',#234,1.); +#234 = DIRECTION('',(0.E+000,-0.173648177667,-0.984807753012)); +#235 = ORIENTED_EDGE('',*,*,#94,.F.); +#236 = ORIENTED_EDGE('',*,*,#47,.T.); +#237 = ORIENTED_EDGE('',*,*,#206,.T.); +#238 = ORIENTED_EDGE('',*,*,#239,.F.); +#239 = EDGE_CURVE('',#223,#199,#240,.T.); +#240 = LINE('',#241,#242); +#241 = CARTESIAN_POINT('',(-1.025,-3.25,0.25)); +#242 = VECTOR('',#243,1.); +#243 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#244 = PLANE('',#245); +#245 = AXIS2_PLACEMENT_3D('',#246,#247,#248); +#246 = CARTESIAN_POINT('',(-1.025,-2.59,0.25)); +#247 = DIRECTION('',(1.,0.E+000,0.E+000)); +#248 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#249 = ADVANCED_FACE('',(#250),#300,.T.); +#250 = FACE_BOUND('',#251,.T.); +#251 = EDGE_LOOP('',(#252,#262,#268,#269,#270,#278,#286,#294)); +#252 = ORIENTED_EDGE('',*,*,#253,.F.); +#253 = EDGE_CURVE('',#254,#256,#258,.T.); +#254 = VERTEX_POINT('',#255); +#255 = CARTESIAN_POINT('',(-1.929591274114,-2.829591274114,1.22)); +#256 = VERTEX_POINT('',#257); +#257 = CARTESIAN_POINT('',(1.929591274114,-2.829591274114,1.22)); +#258 = LINE('',#259,#260); +#259 = CARTESIAN_POINT('',(2.15,-2.829591274114,1.22)); +#260 = VECTOR('',#261,1.); +#261 = DIRECTION('',(1.,0.E+000,0.E+000)); +#262 = ORIENTED_EDGE('',*,*,#263,.T.); +#263 = EDGE_CURVE('',#254,#64,#264,.T.); +#264 = LINE('',#265,#266); +#265 = CARTESIAN_POINT('',(-1.873110093748,-2.773110093748, + 1.540320691364)); +#266 = VECTOR('',#267,1.); +#267 = DIRECTION('',(-0.171087869746,-0.171087869746,-0.970287525248)); +#268 = ORIENTED_EDGE('',*,*,#61,.F.); +#269 = ORIENTED_EDGE('',*,*,#230,.F.); +#270 = ORIENTED_EDGE('',*,*,#271,.F.); +#271 = EDGE_CURVE('',#272,#221,#274,.T.); +#272 = VERTEX_POINT('',#273); +#273 = CARTESIAN_POINT('',(1.025,-3.000628445402,0.25)); +#274 = LINE('',#275,#276); +#275 = CARTESIAN_POINT('',(0.E+000,-3.000628445402,0.25)); +#276 = VECTOR('',#277,1.); +#277 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#278 = ORIENTED_EDGE('',*,*,#279,.F.); +#279 = EDGE_CURVE('',#280,#272,#282,.T.); +#280 = VERTEX_POINT('',#281); +#281 = CARTESIAN_POINT('',(1.025,-3.041183650965,2.E-002)); +#282 = LINE('',#283,#284); +#283 = CARTESIAN_POINT('',(1.025,-3.008147917856,0.207354952577)); +#284 = VECTOR('',#285,1.); +#285 = DIRECTION('',(0.E+000,0.173648177667,0.984807753012)); +#286 = ORIENTED_EDGE('',*,*,#287,.F.); +#287 = EDGE_CURVE('',#288,#280,#290,.T.); +#288 = VERTEX_POINT('',#289); +#289 = CARTESIAN_POINT('',(2.141183650965,-3.041183650965,2.E-002)); +#290 = LINE('',#291,#292); +#291 = CARTESIAN_POINT('',(0.E+000,-3.041183650965,2.E-002)); +#292 = VECTOR('',#293,1.); +#293 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#294 = ORIENTED_EDGE('',*,*,#295,.T.); +#295 = EDGE_CURVE('',#288,#256,#296,.T.); +#296 = LINE('',#297,#298); +#297 = CARTESIAN_POINT('',(1.873110093748,-2.773110093748,1.540320691364 + )); +#298 = VECTOR('',#299,1.); +#299 = DIRECTION('',(-0.171087869746,0.171087869746,0.970287525248)); +#300 = PLANE('',#301); +#301 = AXIS2_PLACEMENT_3D('',#302,#303,#304); +#302 = CARTESIAN_POINT('',(0.E+000,-2.829591274114,1.22)); +#303 = DIRECTION('',(0.E+000,-0.984807753012,0.173648177667)); +#304 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#305 = ADVANCED_FACE('',(#306),#356,.T.); +#306 = FACE_BOUND('',#307,.T.); +#307 = EDGE_LOOP('',(#308,#316,#317,#318,#326,#334,#342,#350)); +#308 = ORIENTED_EDGE('',*,*,#309,.F.); +#309 = EDGE_CURVE('',#72,#310,#312,.T.); +#310 = VERTEX_POINT('',#311); +#311 = CARTESIAN_POINT('',(-2.100628445402,0.6,0.25)); +#312 = LINE('',#313,#314); +#313 = CARTESIAN_POINT('',(-2.090809546332,0.6,0.305685743784)); +#314 = VECTOR('',#315,1.); +#315 = DIRECTION('',(0.173648177667,3.586090123328E-017,0.984807753012) + ); +#316 = ORIENTED_EDGE('',*,*,#71,.F.); +#317 = ORIENTED_EDGE('',*,*,#263,.F.); +#318 = ORIENTED_EDGE('',*,*,#319,.F.); +#319 = EDGE_CURVE('',#320,#254,#322,.T.); +#320 = VERTEX_POINT('',#321); +#321 = CARTESIAN_POINT('',(-1.929591274114,2.829591274114,1.22)); +#322 = LINE('',#323,#324); +#323 = CARTESIAN_POINT('',(-1.929591274114,-2.829591274114,1.22)); +#324 = VECTOR('',#325,1.); +#325 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#326 = ORIENTED_EDGE('',*,*,#327,.F.); +#327 = EDGE_CURVE('',#328,#320,#330,.T.); +#328 = VERTEX_POINT('',#329); +#329 = CARTESIAN_POINT('',(-2.141183650965,3.041183650965,2.E-002)); +#330 = LINE('',#331,#332); +#331 = CARTESIAN_POINT('',(-1.873110093748,2.773110093748,1.540320691364 + )); +#332 = VECTOR('',#333,1.); +#333 = DIRECTION('',(0.171087869746,-0.171087869746,0.970287525248)); +#334 = ORIENTED_EDGE('',*,*,#335,.F.); +#335 = EDGE_CURVE('',#336,#328,#338,.T.); +#336 = VERTEX_POINT('',#337); +#337 = CARTESIAN_POINT('',(-2.141183650965,1.35,2.E-002)); +#338 = LINE('',#339,#340); +#339 = CARTESIAN_POINT('',(-2.141183650965,0.E+000,2.E-002)); +#340 = VECTOR('',#341,1.); +#341 = DIRECTION('',(0.E+000,1.,0.E+000)); +#342 = ORIENTED_EDGE('',*,*,#343,.F.); +#343 = EDGE_CURVE('',#344,#336,#346,.T.); +#344 = VERTEX_POINT('',#345); +#345 = CARTESIAN_POINT('',(-2.100628445402,1.35,0.25)); +#346 = LINE('',#347,#348); +#347 = CARTESIAN_POINT('',(-2.106640233375,1.35,0.215905456161)); +#348 = VECTOR('',#349,1.); +#349 = DIRECTION('',(-0.173648177667,0.E+000,-0.984807753012)); +#350 = ORIENTED_EDGE('',*,*,#351,.F.); +#351 = EDGE_CURVE('',#310,#344,#352,.T.); +#352 = LINE('',#353,#354); +#353 = CARTESIAN_POINT('',(-2.100628445402,0.E+000,0.25)); +#354 = VECTOR('',#355,1.); +#355 = DIRECTION('',(0.E+000,1.,0.E+000)); +#356 = PLANE('',#357); +#357 = AXIS2_PLACEMENT_3D('',#358,#359,#360); +#358 = CARTESIAN_POINT('',(-1.929591274114,0.E+000,1.22)); +#359 = DIRECTION('',(-0.984807753012,0.E+000,0.173648177667)); +#360 = DIRECTION('',(0.E+000,1.,0.E+000)); +#361 = ADVANCED_FACE('',(#362),#382,.F.); +#362 = FACE_BOUND('',#363,.T.); +#363 = EDGE_LOOP('',(#364,#365,#366,#374,#380,#381)); +#364 = ORIENTED_EDGE('',*,*,#79,.F.); +#365 = ORIENTED_EDGE('',*,*,#309,.T.); +#366 = ORIENTED_EDGE('',*,*,#367,.F.); +#367 = EDGE_CURVE('',#368,#310,#370,.T.); +#368 = VERTEX_POINT('',#369); +#369 = CARTESIAN_POINT('',(-2.3,0.6,0.25)); +#370 = LINE('',#371,#372); +#371 = CARTESIAN_POINT('',(-1.775,0.6,0.25)); +#372 = VECTOR('',#373,1.); +#373 = DIRECTION('',(1.,2.06514699521E-016,0.E+000)); +#374 = ORIENTED_EDGE('',*,*,#375,.T.); +#375 = EDGE_CURVE('',#368,#135,#376,.T.); +#376 = LINE('',#377,#378); +#377 = CARTESIAN_POINT('',(-2.3,0.6,0.25)); +#378 = VECTOR('',#379,1.); +#379 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#380 = ORIENTED_EDGE('',*,*,#134,.T.); +#381 = ORIENTED_EDGE('',*,*,#109,.F.); +#382 = PLANE('',#383); +#383 = AXIS2_PLACEMENT_3D('',#384,#385,#386); +#384 = CARTESIAN_POINT('',(-1.775,0.6,0.25)); +#385 = DIRECTION('',(-2.06514699521E-016,1.,0.E+000)); +#386 = DIRECTION('',(-1.,-2.06514699521E-016,0.E+000)); +#387 = ADVANCED_FACE('',(#388),#406,.F.); +#388 = FACE_BOUND('',#389,.T.); +#389 = EDGE_LOOP('',(#390,#391,#392,#400)); +#390 = ORIENTED_EDGE('',*,*,#142,.T.); +#391 = ORIENTED_EDGE('',*,*,#375,.F.); +#392 = ORIENTED_EDGE('',*,*,#393,.F.); +#393 = EDGE_CURVE('',#394,#368,#396,.T.); +#394 = VERTEX_POINT('',#395); +#395 = CARTESIAN_POINT('',(-2.3,1.35,0.25)); +#396 = LINE('',#397,#398); +#397 = CARTESIAN_POINT('',(-2.3,1.35,0.25)); +#398 = VECTOR('',#399,1.); +#399 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#400 = ORIENTED_EDGE('',*,*,#401,.T.); +#401 = EDGE_CURVE('',#394,#143,#402,.T.); +#402 = LINE('',#403,#404); +#403 = CARTESIAN_POINT('',(-2.3,1.35,0.25)); +#404 = VECTOR('',#405,1.); +#405 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#406 = PLANE('',#407); +#407 = AXIS2_PLACEMENT_3D('',#408,#409,#410); +#408 = CARTESIAN_POINT('',(-2.3,1.35,0.25)); +#409 = DIRECTION('',(1.,0.E+000,0.E+000)); +#410 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#411 = ADVANCED_FACE('',(#412),#453,.F.); +#412 = FACE_BOUND('',#413,.T.); +#413 = EDGE_LOOP('',(#414,#420,#421,#429,#437,#445,#451,#452)); +#414 = ORIENTED_EDGE('',*,*,#415,.F.); +#415 = EDGE_CURVE('',#344,#394,#416,.T.); +#416 = LINE('',#417,#418); +#417 = CARTESIAN_POINT('',(-2.3,1.35,0.25)); +#418 = VECTOR('',#419,1.); +#419 = DIRECTION('',(-1.,-0.E+000,-0.E+000)); +#420 = ORIENTED_EDGE('',*,*,#343,.T.); +#421 = ORIENTED_EDGE('',*,*,#422,.F.); +#422 = EDGE_CURVE('',#423,#336,#425,.T.); +#423 = VERTEX_POINT('',#424); +#424 = CARTESIAN_POINT('',(2.141183650965,1.35,2.E-002)); +#425 = LINE('',#426,#427); +#426 = CARTESIAN_POINT('',(-2.3,1.35,2.E-002)); +#427 = VECTOR('',#428,1.); +#428 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#429 = ORIENTED_EDGE('',*,*,#430,.T.); +#430 = EDGE_CURVE('',#423,#431,#433,.T.); +#431 = VERTEX_POINT('',#432); +#432 = CARTESIAN_POINT('',(2.100628445402,1.35,0.25)); +#433 = LINE('',#434,#435); +#434 = CARTESIAN_POINT('',(1.967933261183,1.35,1.00255178581)); +#435 = VECTOR('',#436,1.); +#436 = DIRECTION('',(-0.173648177667,0.E+000,0.984807753012)); +#437 = ORIENTED_EDGE('',*,*,#438,.F.); +#438 = EDGE_CURVE('',#439,#431,#441,.T.); +#439 = VERTEX_POINT('',#440); +#440 = CARTESIAN_POINT('',(2.3,1.35,0.25)); +#441 = LINE('',#442,#443); +#442 = CARTESIAN_POINT('',(-2.3,1.35,0.25)); +#443 = VECTOR('',#444,1.); +#444 = DIRECTION('',(-1.,-0.E+000,-0.E+000)); +#445 = ORIENTED_EDGE('',*,*,#446,.T.); +#446 = EDGE_CURVE('',#439,#151,#447,.T.); +#447 = LINE('',#448,#449); +#448 = CARTESIAN_POINT('',(2.3,1.35,0.25)); +#449 = VECTOR('',#450,1.); +#450 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#451 = ORIENTED_EDGE('',*,*,#150,.T.); +#452 = ORIENTED_EDGE('',*,*,#401,.F.); +#453 = PLANE('',#454); +#454 = AXIS2_PLACEMENT_3D('',#455,#456,#457); +#455 = CARTESIAN_POINT('',(-2.3,1.35,0.25)); +#456 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#457 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#458 = ADVANCED_FACE('',(#459),#477,.F.); +#459 = FACE_BOUND('',#460,.T.); +#460 = EDGE_LOOP('',(#461,#462,#463,#471)); +#461 = ORIENTED_EDGE('',*,*,#158,.T.); +#462 = ORIENTED_EDGE('',*,*,#446,.F.); +#463 = ORIENTED_EDGE('',*,*,#464,.F.); +#464 = EDGE_CURVE('',#465,#439,#467,.T.); +#465 = VERTEX_POINT('',#466); +#466 = CARTESIAN_POINT('',(2.3,0.6,0.25)); +#467 = LINE('',#468,#469); +#468 = CARTESIAN_POINT('',(2.3,1.35,0.25)); +#469 = VECTOR('',#470,1.); +#470 = DIRECTION('',(0.E+000,1.,0.E+000)); +#471 = ORIENTED_EDGE('',*,*,#472,.T.); +#472 = EDGE_CURVE('',#465,#159,#473,.T.); +#473 = LINE('',#474,#475); +#474 = CARTESIAN_POINT('',(2.3,0.6,0.25)); +#475 = VECTOR('',#476,1.); +#476 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#477 = PLANE('',#478); +#478 = AXIS2_PLACEMENT_3D('',#479,#480,#481); +#479 = CARTESIAN_POINT('',(2.3,1.35,0.25)); +#480 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#481 = DIRECTION('',(0.E+000,0.E+000,1.)); +#482 = ADVANCED_FACE('',(#483),#517,.F.); +#483 = FACE_BOUND('',#484,.T.); +#484 = EDGE_LOOP('',(#485,#493,#501,#509,#515,#516)); +#485 = ORIENTED_EDGE('',*,*,#486,.F.); +#486 = EDGE_CURVE('',#487,#465,#489,.T.); +#487 = VERTEX_POINT('',#488); +#488 = CARTESIAN_POINT('',(2.100628445402,0.6,0.25)); +#489 = LINE('',#490,#491); +#490 = CARTESIAN_POINT('',(1.775,0.6,0.25)); +#491 = VECTOR('',#492,1.); +#492 = DIRECTION('',(1.,0.E+000,0.E+000)); +#493 = ORIENTED_EDGE('',*,*,#494,.T.); +#494 = EDGE_CURVE('',#487,#495,#497,.T.); +#495 = VERTEX_POINT('',#496); +#496 = CARTESIAN_POINT('',(2.141183650965,0.6,2.E-002)); +#497 = LINE('',#498,#499); +#498 = CARTESIAN_POINT('',(2.090809546332,0.6,0.305685743784)); +#499 = VECTOR('',#500,1.); +#500 = DIRECTION('',(0.173648177667,0.E+000,-0.984807753012)); +#501 = ORIENTED_EDGE('',*,*,#502,.F.); +#502 = EDGE_CURVE('',#503,#495,#505,.T.); +#503 = VERTEX_POINT('',#504); +#504 = CARTESIAN_POINT('',(1.775,0.6,2.E-002)); +#505 = LINE('',#506,#507); +#506 = CARTESIAN_POINT('',(1.775,0.6,2.E-002)); +#507 = VECTOR('',#508,1.); +#508 = DIRECTION('',(1.,0.E+000,0.E+000)); +#509 = ORIENTED_EDGE('',*,*,#510,.T.); +#510 = EDGE_CURVE('',#503,#167,#511,.T.); +#511 = LINE('',#512,#513); +#512 = CARTESIAN_POINT('',(1.775,0.6,0.25)); +#513 = VECTOR('',#514,1.); +#514 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#515 = ORIENTED_EDGE('',*,*,#166,.T.); +#516 = ORIENTED_EDGE('',*,*,#472,.F.); +#517 = PLANE('',#518); +#518 = AXIS2_PLACEMENT_3D('',#519,#520,#521); +#519 = CARTESIAN_POINT('',(1.775,0.6,0.25)); +#520 = DIRECTION('',(0.E+000,1.,0.E+000)); +#521 = DIRECTION('',(0.E+000,0.E+000,1.)); +#522 = ADVANCED_FACE('',(#523),#541,.F.); +#523 = FACE_BOUND('',#524,.T.); +#524 = EDGE_LOOP('',(#525,#533,#539,#540)); +#525 = ORIENTED_EDGE('',*,*,#526,.F.); +#526 = EDGE_CURVE('',#527,#503,#529,.T.); +#527 = VERTEX_POINT('',#528); +#528 = CARTESIAN_POINT('',(1.775,-2.59,2.E-002)); +#529 = LINE('',#530,#531); +#530 = CARTESIAN_POINT('',(1.775,-2.59,2.E-002)); +#531 = VECTOR('',#532,1.); +#532 = DIRECTION('',(0.E+000,1.,0.E+000)); +#533 = ORIENTED_EDGE('',*,*,#534,.T.); +#534 = EDGE_CURVE('',#527,#175,#535,.T.); +#535 = LINE('',#536,#537); +#536 = CARTESIAN_POINT('',(1.775,-2.59,0.25)); +#537 = VECTOR('',#538,1.); +#538 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#539 = ORIENTED_EDGE('',*,*,#174,.T.); +#540 = ORIENTED_EDGE('',*,*,#510,.F.); +#541 = PLANE('',#542); +#542 = AXIS2_PLACEMENT_3D('',#543,#544,#545); +#543 = CARTESIAN_POINT('',(1.775,-2.59,0.25)); +#544 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#545 = DIRECTION('',(0.E+000,0.E+000,1.)); +#546 = ADVANCED_FACE('',(#547),#565,.F.); +#547 = FACE_BOUND('',#548,.T.); +#548 = EDGE_LOOP('',(#549,#557,#563,#564)); +#549 = ORIENTED_EDGE('',*,*,#550,.F.); +#550 = EDGE_CURVE('',#551,#527,#553,.T.); +#551 = VERTEX_POINT('',#552); +#552 = CARTESIAN_POINT('',(1.025,-2.59,2.E-002)); +#553 = LINE('',#554,#555); +#554 = CARTESIAN_POINT('',(1.025,-2.59,2.E-002)); +#555 = VECTOR('',#556,1.); +#556 = DIRECTION('',(1.,0.E+000,0.E+000)); +#557 = ORIENTED_EDGE('',*,*,#558,.T.); +#558 = EDGE_CURVE('',#551,#183,#559,.T.); +#559 = LINE('',#560,#561); +#560 = CARTESIAN_POINT('',(1.025,-2.59,0.25)); +#561 = VECTOR('',#562,1.); +#562 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#563 = ORIENTED_EDGE('',*,*,#182,.T.); +#564 = ORIENTED_EDGE('',*,*,#534,.F.); +#565 = PLANE('',#566); +#566 = AXIS2_PLACEMENT_3D('',#567,#568,#569); +#567 = CARTESIAN_POINT('',(1.025,-2.59,0.25)); +#568 = DIRECTION('',(0.E+000,1.,0.E+000)); +#569 = DIRECTION('',(0.E+000,0.E+000,1.)); +#570 = ADVANCED_FACE('',(#571),#596,.F.); +#571 = FACE_BOUND('',#572,.T.); +#572 = EDGE_LOOP('',(#573,#579,#580,#588,#594,#595)); +#573 = ORIENTED_EDGE('',*,*,#574,.F.); +#574 = EDGE_CURVE('',#280,#551,#575,.T.); +#575 = LINE('',#576,#577); +#576 = CARTESIAN_POINT('',(1.025,-3.25,2.E-002)); +#577 = VECTOR('',#578,1.); +#578 = DIRECTION('',(0.E+000,1.,0.E+000)); +#579 = ORIENTED_EDGE('',*,*,#279,.T.); +#580 = ORIENTED_EDGE('',*,*,#581,.F.); +#581 = EDGE_CURVE('',#582,#272,#584,.T.); +#582 = VERTEX_POINT('',#583); +#583 = CARTESIAN_POINT('',(1.025,-3.25,0.25)); +#584 = LINE('',#585,#586); +#585 = CARTESIAN_POINT('',(1.025,-3.25,0.25)); +#586 = VECTOR('',#587,1.); +#587 = DIRECTION('',(0.E+000,1.,0.E+000)); +#588 = ORIENTED_EDGE('',*,*,#589,.T.); +#589 = EDGE_CURVE('',#582,#191,#590,.T.); +#590 = LINE('',#591,#592); +#591 = CARTESIAN_POINT('',(1.025,-3.25,0.25)); +#592 = VECTOR('',#593,1.); +#593 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#594 = ORIENTED_EDGE('',*,*,#190,.T.); +#595 = ORIENTED_EDGE('',*,*,#558,.F.); +#596 = PLANE('',#597); +#597 = AXIS2_PLACEMENT_3D('',#598,#599,#600); +#598 = CARTESIAN_POINT('',(1.025,-3.25,0.25)); +#599 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#600 = DIRECTION('',(0.E+000,0.E+000,1.)); +#601 = ADVANCED_FACE('',(#602),#613,.F.); +#602 = FACE_BOUND('',#603,.T.); +#603 = EDGE_LOOP('',(#604,#605,#606,#612)); +#604 = ORIENTED_EDGE('',*,*,#198,.T.); +#605 = ORIENTED_EDGE('',*,*,#589,.F.); +#606 = ORIENTED_EDGE('',*,*,#607,.F.); +#607 = EDGE_CURVE('',#223,#582,#608,.T.); +#608 = LINE('',#609,#610); +#609 = CARTESIAN_POINT('',(-1.025,-3.25,0.25)); +#610 = VECTOR('',#611,1.); +#611 = DIRECTION('',(1.,0.E+000,0.E+000)); +#612 = ORIENTED_EDGE('',*,*,#239,.T.); +#613 = PLANE('',#614); +#614 = AXIS2_PLACEMENT_3D('',#615,#616,#617); +#615 = CARTESIAN_POINT('',(-1.025,-3.25,0.25)); +#616 = DIRECTION('',(0.E+000,1.,0.E+000)); +#617 = DIRECTION('',(0.E+000,0.E+000,1.)); +#618 = ADVANCED_FACE('',(#619),#625,.F.); +#619 = FACE_BOUND('',#620,.T.); +#620 = EDGE_LOOP('',(#621,#622,#623,#624)); +#621 = ORIENTED_EDGE('',*,*,#581,.T.); +#622 = ORIENTED_EDGE('',*,*,#271,.T.); +#623 = ORIENTED_EDGE('',*,*,#220,.T.); +#624 = ORIENTED_EDGE('',*,*,#607,.T.); +#625 = PLANE('',#626); +#626 = AXIS2_PLACEMENT_3D('',#627,#628,#629); +#627 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.25)); +#628 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#629 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#630 = ADVANCED_FACE('',(#631),#649,.T.); +#631 = FACE_BOUND('',#632,.T.); +#632 = EDGE_LOOP('',(#633,#641,#642,#643)); +#633 = ORIENTED_EDGE('',*,*,#634,.T.); +#634 = EDGE_CURVE('',#635,#320,#637,.T.); +#635 = VERTEX_POINT('',#636); +#636 = CARTESIAN_POINT('',(1.929591274114,2.829591274114,1.22)); +#637 = LINE('',#638,#639); +#638 = CARTESIAN_POINT('',(-2.15,2.829591274114,1.22)); +#639 = VECTOR('',#640,1.); +#640 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#641 = ORIENTED_EDGE('',*,*,#319,.T.); +#642 = ORIENTED_EDGE('',*,*,#253,.T.); +#643 = ORIENTED_EDGE('',*,*,#644,.T.); +#644 = EDGE_CURVE('',#256,#635,#645,.T.); +#645 = LINE('',#646,#647); +#646 = CARTESIAN_POINT('',(1.929591274114,2.829591274114,1.22)); +#647 = VECTOR('',#648,1.); +#648 = DIRECTION('',(0.E+000,1.,0.E+000)); +#649 = PLANE('',#650); +#650 = AXIS2_PLACEMENT_3D('',#651,#652,#653); +#651 = CARTESIAN_POINT('',(0.E+000,0.E+000,1.22)); +#652 = DIRECTION('',(0.E+000,0.E+000,1.)); +#653 = DIRECTION('',(1.,0.E+000,0.E+000)); +#654 = ADVANCED_FACE('',(#655),#668,.F.); +#655 = FACE_BOUND('',#656,.T.); +#656 = EDGE_LOOP('',(#657,#658,#664,#665,#666,#667)); +#657 = ORIENTED_EDGE('',*,*,#502,.T.); +#658 = ORIENTED_EDGE('',*,*,#659,.T.); +#659 = EDGE_CURVE('',#495,#288,#660,.T.); +#660 = LINE('',#661,#662); +#661 = CARTESIAN_POINT('',(2.141183650965,0.E+000,2.E-002)); +#662 = VECTOR('',#663,1.); +#663 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#664 = ORIENTED_EDGE('',*,*,#287,.T.); +#665 = ORIENTED_EDGE('',*,*,#574,.T.); +#666 = ORIENTED_EDGE('',*,*,#550,.T.); +#667 = ORIENTED_EDGE('',*,*,#526,.T.); +#668 = PLANE('',#669); +#669 = AXIS2_PLACEMENT_3D('',#670,#671,#672); +#670 = CARTESIAN_POINT('',(0.E+000,0.E+000,2.E-002)); +#671 = DIRECTION('',(0.E+000,0.E+000,1.)); +#672 = DIRECTION('',(1.,0.E+000,0.E+000)); +#673 = ADVANCED_FACE('',(#674),#701,.T.); +#674 = FACE_BOUND('',#675,.T.); +#675 = EDGE_LOOP('',(#676,#677,#678,#679,#685,#686,#694,#700)); +#676 = ORIENTED_EDGE('',*,*,#295,.F.); +#677 = ORIENTED_EDGE('',*,*,#659,.F.); +#678 = ORIENTED_EDGE('',*,*,#494,.F.); +#679 = ORIENTED_EDGE('',*,*,#680,.F.); +#680 = EDGE_CURVE('',#431,#487,#681,.T.); +#681 = LINE('',#682,#683); +#682 = CARTESIAN_POINT('',(2.100628445402,0.E+000,0.25)); +#683 = VECTOR('',#684,1.); +#684 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#685 = ORIENTED_EDGE('',*,*,#430,.F.); +#686 = ORIENTED_EDGE('',*,*,#687,.F.); +#687 = EDGE_CURVE('',#688,#423,#690,.T.); +#688 = VERTEX_POINT('',#689); +#689 = CARTESIAN_POINT('',(2.141183650965,3.041183650965,2.E-002)); +#690 = LINE('',#691,#692); +#691 = CARTESIAN_POINT('',(2.141183650965,0.E+000,2.E-002)); +#692 = VECTOR('',#693,1.); +#693 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#694 = ORIENTED_EDGE('',*,*,#695,.F.); +#695 = EDGE_CURVE('',#635,#688,#696,.T.); +#696 = LINE('',#697,#698); +#697 = CARTESIAN_POINT('',(1.873110093748,2.773110093748,1.540320691364) + ); +#698 = VECTOR('',#699,1.); +#699 = DIRECTION('',(0.171087869746,0.171087869746,-0.970287525248)); +#700 = ORIENTED_EDGE('',*,*,#644,.F.); +#701 = PLANE('',#702); +#702 = AXIS2_PLACEMENT_3D('',#703,#704,#705); +#703 = CARTESIAN_POINT('',(1.929591274114,0.E+000,1.22)); +#704 = DIRECTION('',(0.984807753012,0.E+000,0.173648177667)); +#705 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#706 = ADVANCED_FACE('',(#707),#782,.T.); +#707 = FACE_BOUND('',#708,.T.); +#708 = EDGE_LOOP('',(#709,#717,#718,#719,#720,#728,#736,#744,#752,#760, + #768,#776)); +#709 = ORIENTED_EDGE('',*,*,#710,.F.); +#710 = EDGE_CURVE('',#328,#711,#713,.T.); +#711 = VERTEX_POINT('',#712); +#712 = CARTESIAN_POINT('',(-1.665,3.041183650965,2.E-002)); +#713 = LINE('',#714,#715); +#714 = CARTESIAN_POINT('',(0.E+000,3.041183650965,2.E-002)); +#715 = VECTOR('',#716,1.); +#716 = DIRECTION('',(1.,0.E+000,0.E+000)); +#717 = ORIENTED_EDGE('',*,*,#327,.T.); +#718 = ORIENTED_EDGE('',*,*,#634,.F.); +#719 = ORIENTED_EDGE('',*,*,#695,.T.); +#720 = ORIENTED_EDGE('',*,*,#721,.F.); +#721 = EDGE_CURVE('',#722,#688,#724,.T.); +#722 = VERTEX_POINT('',#723); +#723 = CARTESIAN_POINT('',(1.665,3.041183650965,2.E-002)); +#724 = LINE('',#725,#726); +#725 = CARTESIAN_POINT('',(0.E+000,3.041183650965,2.E-002)); +#726 = VECTOR('',#727,1.); +#727 = DIRECTION('',(1.,0.E+000,0.E+000)); +#728 = ORIENTED_EDGE('',*,*,#729,.T.); +#729 = EDGE_CURVE('',#722,#730,#732,.T.); +#730 = VERTEX_POINT('',#731); +#731 = CARTESIAN_POINT('',(1.665,3.000628445402,0.25)); +#732 = LINE('',#733,#734); +#733 = CARTESIAN_POINT('',(1.665,2.918869595985,0.713677476289)); +#734 = VECTOR('',#735,1.); +#735 = DIRECTION('',(0.E+000,-0.173648177667,0.984807753012)); +#736 = ORIENTED_EDGE('',*,*,#737,.F.); +#737 = EDGE_CURVE('',#738,#730,#740,.T.); +#738 = VERTEX_POINT('',#739); +#739 = CARTESIAN_POINT('',(0.465,3.000628445402,0.25)); +#740 = LINE('',#741,#742); +#741 = CARTESIAN_POINT('',(0.E+000,3.000628445402,0.25)); +#742 = VECTOR('',#743,1.); +#743 = DIRECTION('',(1.,0.E+000,0.E+000)); +#744 = ORIENTED_EDGE('',*,*,#745,.T.); +#745 = EDGE_CURVE('',#738,#746,#748,.T.); +#746 = VERTEX_POINT('',#747); +#747 = CARTESIAN_POINT('',(0.465,3.041183650965,2.E-002)); +#748 = LINE('',#749,#750); +#749 = CARTESIAN_POINT('',(0.465,2.918869595985,0.713677476289)); +#750 = VECTOR('',#751,1.); +#751 = DIRECTION('',(6.908980971548E-017,0.173648177667,-0.984807753012) + ); +#752 = ORIENTED_EDGE('',*,*,#753,.F.); +#753 = EDGE_CURVE('',#754,#746,#756,.T.); +#754 = VERTEX_POINT('',#755); +#755 = CARTESIAN_POINT('',(-0.465,3.041183650965,2.E-002)); +#756 = LINE('',#757,#758); +#757 = CARTESIAN_POINT('',(0.E+000,3.041183650965,2.E-002)); +#758 = VECTOR('',#759,1.); +#759 = DIRECTION('',(1.,0.E+000,0.E+000)); +#760 = ORIENTED_EDGE('',*,*,#761,.T.); +#761 = EDGE_CURVE('',#754,#762,#764,.T.); +#762 = VERTEX_POINT('',#763); +#763 = CARTESIAN_POINT('',(-0.465,3.000628445402,0.25)); +#764 = LINE('',#765,#766); +#765 = CARTESIAN_POINT('',(-0.465,2.918869595985,0.713677476289)); +#766 = VECTOR('',#767,1.); +#767 = DIRECTION('',(6.908980971548E-017,-0.173648177667,0.984807753012) + ); +#768 = ORIENTED_EDGE('',*,*,#769,.F.); +#769 = EDGE_CURVE('',#770,#762,#772,.T.); +#770 = VERTEX_POINT('',#771); +#771 = CARTESIAN_POINT('',(-1.665,3.000628445402,0.25)); +#772 = LINE('',#773,#774); +#773 = CARTESIAN_POINT('',(0.E+000,3.000628445402,0.25)); +#774 = VECTOR('',#775,1.); +#775 = DIRECTION('',(1.,0.E+000,0.E+000)); +#776 = ORIENTED_EDGE('',*,*,#777,.T.); +#777 = EDGE_CURVE('',#770,#711,#778,.T.); +#778 = LINE('',#779,#780); +#779 = CARTESIAN_POINT('',(-1.665,2.918869595985,0.713677476289)); +#780 = VECTOR('',#781,1.); +#781 = DIRECTION('',(0.E+000,0.173648177667,-0.984807753012)); +#782 = PLANE('',#783); +#783 = AXIS2_PLACEMENT_3D('',#784,#785,#786); +#784 = CARTESIAN_POINT('',(0.E+000,2.829591274114,1.22)); +#785 = DIRECTION('',(0.E+000,0.984807753012,0.173648177667)); +#786 = DIRECTION('',(1.,0.E+000,0.E+000)); +#787 = ADVANCED_FACE('',(#788),#840,.F.); +#788 = FACE_BOUND('',#789,.F.); +#789 = EDGE_LOOP('',(#790,#791,#792,#793,#801,#809,#815,#816,#824,#832, + #838,#839)); +#790 = ORIENTED_EDGE('',*,*,#422,.F.); +#791 = ORIENTED_EDGE('',*,*,#687,.F.); +#792 = ORIENTED_EDGE('',*,*,#721,.F.); +#793 = ORIENTED_EDGE('',*,*,#794,.T.); +#794 = EDGE_CURVE('',#722,#795,#797,.T.); +#795 = VERTEX_POINT('',#796); +#796 = CARTESIAN_POINT('',(1.665,2.16,2.E-002)); +#797 = LINE('',#798,#799); +#798 = CARTESIAN_POINT('',(1.665,1.625,2.E-002)); +#799 = VECTOR('',#800,1.); +#800 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#801 = ORIENTED_EDGE('',*,*,#802,.T.); +#802 = EDGE_CURVE('',#795,#803,#805,.T.); +#803 = VERTEX_POINT('',#804); +#804 = CARTESIAN_POINT('',(0.465,2.16,2.E-002)); +#805 = LINE('',#806,#807); +#806 = CARTESIAN_POINT('',(0.2325,2.16,2.E-002)); +#807 = VECTOR('',#808,1.); +#808 = DIRECTION('',(-1.,3.614007241618E-016,0.E+000)); +#809 = ORIENTED_EDGE('',*,*,#810,.T.); +#810 = EDGE_CURVE('',#803,#746,#811,.T.); +#811 = LINE('',#812,#813); +#812 = CARTESIAN_POINT('',(0.465,1.625,2.E-002)); +#813 = VECTOR('',#814,1.); +#814 = DIRECTION('',(3.978723568754E-016,1.,0.E+000)); +#815 = ORIENTED_EDGE('',*,*,#753,.F.); +#816 = ORIENTED_EDGE('',*,*,#817,.T.); +#817 = EDGE_CURVE('',#754,#818,#820,.T.); +#818 = VERTEX_POINT('',#819); +#819 = CARTESIAN_POINT('',(-0.465,2.16,2.E-002)); +#820 = LINE('',#821,#822); +#821 = CARTESIAN_POINT('',(-0.465,1.625,2.E-002)); +#822 = VECTOR('',#823,1.); +#823 = DIRECTION('',(3.978723568754E-016,-1.,0.E+000)); +#824 = ORIENTED_EDGE('',*,*,#825,.T.); +#825 = EDGE_CURVE('',#818,#826,#828,.T.); +#826 = VERTEX_POINT('',#827); +#827 = CARTESIAN_POINT('',(-1.665,2.16,2.E-002)); +#828 = LINE('',#829,#830); +#829 = CARTESIAN_POINT('',(-0.8325,2.16,2.E-002)); +#830 = VECTOR('',#831,1.); +#831 = DIRECTION('',(-1.,-3.614007241618E-016,0.E+000)); +#832 = ORIENTED_EDGE('',*,*,#833,.T.); +#833 = EDGE_CURVE('',#826,#711,#834,.T.); +#834 = LINE('',#835,#836); +#835 = CARTESIAN_POINT('',(-1.665,1.625,2.E-002)); +#836 = VECTOR('',#837,1.); +#837 = DIRECTION('',(0.E+000,1.,0.E+000)); +#838 = ORIENTED_EDGE('',*,*,#710,.F.); +#839 = ORIENTED_EDGE('',*,*,#335,.F.); +#840 = PLANE('',#841); +#841 = AXIS2_PLACEMENT_3D('',#842,#843,#844); +#842 = CARTESIAN_POINT('',(0.E+000,0.E+000,2.E-002)); +#843 = DIRECTION('',(0.E+000,0.E+000,1.)); +#844 = DIRECTION('',(1.,0.E+000,0.E+000)); +#845 = ADVANCED_FACE('',(#846),#852,.F.); +#846 = FACE_BOUND('',#847,.T.); +#847 = EDGE_LOOP('',(#848,#849,#850,#851)); +#848 = ORIENTED_EDGE('',*,*,#367,.T.); +#849 = ORIENTED_EDGE('',*,*,#351,.T.); +#850 = ORIENTED_EDGE('',*,*,#415,.T.); +#851 = ORIENTED_EDGE('',*,*,#393,.T.); +#852 = PLANE('',#853); +#853 = AXIS2_PLACEMENT_3D('',#854,#855,#856); +#854 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.25)); +#855 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#856 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#857 = ADVANCED_FACE('',(#858),#864,.F.); +#858 = FACE_BOUND('',#859,.T.); +#859 = EDGE_LOOP('',(#860,#861,#862,#863)); +#860 = ORIENTED_EDGE('',*,*,#438,.T.); +#861 = ORIENTED_EDGE('',*,*,#680,.T.); +#862 = ORIENTED_EDGE('',*,*,#486,.T.); +#863 = ORIENTED_EDGE('',*,*,#464,.T.); +#864 = PLANE('',#865); +#865 = AXIS2_PLACEMENT_3D('',#866,#867,#868); +#866 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.25)); +#867 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#868 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#869 = ADVANCED_FACE('',(#870),#904,.F.); +#870 = FACE_BOUND('',#871,.F.); +#871 = EDGE_LOOP('',(#872,#882,#890,#896,#897,#898)); +#872 = ORIENTED_EDGE('',*,*,#873,.F.); +#873 = EDGE_CURVE('',#874,#876,#878,.T.); +#874 = VERTEX_POINT('',#875); +#875 = CARTESIAN_POINT('',(-1.665,3.25,0.E+000)); +#876 = VERTEX_POINT('',#877); +#877 = CARTESIAN_POINT('',(-1.665,2.16,0.E+000)); +#878 = LINE('',#879,#880); +#879 = CARTESIAN_POINT('',(-1.665,3.25,0.E+000)); +#880 = VECTOR('',#881,1.); +#881 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#882 = ORIENTED_EDGE('',*,*,#883,.F.); +#883 = EDGE_CURVE('',#884,#874,#886,.T.); +#884 = VERTEX_POINT('',#885); +#885 = CARTESIAN_POINT('',(-1.665,3.25,0.25)); +#886 = LINE('',#887,#888); +#887 = CARTESIAN_POINT('',(-1.665,3.25,0.25)); +#888 = VECTOR('',#889,1.); +#889 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#890 = ORIENTED_EDGE('',*,*,#891,.T.); +#891 = EDGE_CURVE('',#884,#770,#892,.T.); +#892 = LINE('',#893,#894); +#893 = CARTESIAN_POINT('',(-1.665,3.25,0.25)); +#894 = VECTOR('',#895,1.); +#895 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#896 = ORIENTED_EDGE('',*,*,#777,.T.); +#897 = ORIENTED_EDGE('',*,*,#833,.F.); +#898 = ORIENTED_EDGE('',*,*,#899,.T.); +#899 = EDGE_CURVE('',#826,#876,#900,.T.); +#900 = LINE('',#901,#902); +#901 = CARTESIAN_POINT('',(-1.665,2.16,0.25)); +#902 = VECTOR('',#903,1.); +#903 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#904 = PLANE('',#905); +#905 = AXIS2_PLACEMENT_3D('',#906,#907,#908); +#906 = CARTESIAN_POINT('',(-1.665,3.25,0.25)); +#907 = DIRECTION('',(1.,0.E+000,0.E+000)); +#908 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#909 = ADVANCED_FACE('',(#910),#928,.T.); +#910 = FACE_BOUND('',#911,.T.); +#911 = EDGE_LOOP('',(#912,#920,#921,#922)); +#912 = ORIENTED_EDGE('',*,*,#913,.T.); +#913 = EDGE_CURVE('',#914,#884,#916,.T.); +#914 = VERTEX_POINT('',#915); +#915 = CARTESIAN_POINT('',(-0.465,3.25,0.25)); +#916 = LINE('',#917,#918); +#917 = CARTESIAN_POINT('',(-1.665,3.25,0.25)); +#918 = VECTOR('',#919,1.); +#919 = DIRECTION('',(-1.,-3.614007241618E-016,-0.E+000)); +#920 = ORIENTED_EDGE('',*,*,#891,.T.); +#921 = ORIENTED_EDGE('',*,*,#769,.T.); +#922 = ORIENTED_EDGE('',*,*,#923,.T.); +#923 = EDGE_CURVE('',#762,#914,#924,.T.); +#924 = LINE('',#925,#926); +#925 = CARTESIAN_POINT('',(-0.465,3.25,0.25)); +#926 = VECTOR('',#927,1.); +#927 = DIRECTION('',(-3.978723568754E-016,1.,0.E+000)); +#928 = PLANE('',#929); +#929 = AXIS2_PLACEMENT_3D('',#930,#931,#932); +#930 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.25)); +#931 = DIRECTION('',(0.E+000,0.E+000,1.)); +#932 = DIRECTION('',(1.,0.E+000,0.E+000)); +#933 = ADVANCED_FACE('',(#934),#961,.F.); +#934 = FACE_BOUND('',#935,.F.); +#935 = EDGE_LOOP('',(#936,#946,#952,#953,#954,#955)); +#936 = ORIENTED_EDGE('',*,*,#937,.F.); +#937 = EDGE_CURVE('',#938,#940,#942,.T.); +#938 = VERTEX_POINT('',#939); +#939 = CARTESIAN_POINT('',(-0.465,2.16,0.E+000)); +#940 = VERTEX_POINT('',#941); +#941 = CARTESIAN_POINT('',(-0.465,3.25,0.E+000)); +#942 = LINE('',#943,#944); +#943 = CARTESIAN_POINT('',(-0.465,3.25,0.E+000)); +#944 = VECTOR('',#945,1.); +#945 = DIRECTION('',(-3.978723568754E-016,1.,0.E+000)); +#946 = ORIENTED_EDGE('',*,*,#947,.F.); +#947 = EDGE_CURVE('',#818,#938,#948,.T.); +#948 = LINE('',#949,#950); +#949 = CARTESIAN_POINT('',(-0.465,2.16,0.25)); +#950 = VECTOR('',#951,1.); +#951 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#952 = ORIENTED_EDGE('',*,*,#817,.F.); +#953 = ORIENTED_EDGE('',*,*,#761,.T.); +#954 = ORIENTED_EDGE('',*,*,#923,.T.); +#955 = ORIENTED_EDGE('',*,*,#956,.T.); +#956 = EDGE_CURVE('',#914,#940,#957,.T.); +#957 = LINE('',#958,#959); +#958 = CARTESIAN_POINT('',(-0.465,3.25,0.25)); +#959 = VECTOR('',#960,1.); +#960 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#961 = PLANE('',#962); +#962 = AXIS2_PLACEMENT_3D('',#963,#964,#965); +#963 = CARTESIAN_POINT('',(-0.465,3.25,0.25)); +#964 = DIRECTION('',(-1.,-3.978723568754E-016,0.E+000)); +#965 = DIRECTION('',(3.978723568754E-016,-1.,0.E+000)); +#966 = ADVANCED_FACE('',(#967),#1001,.F.); +#967 = FACE_BOUND('',#968,.F.); +#968 = EDGE_LOOP('',(#969,#979,#987,#993,#994,#995)); +#969 = ORIENTED_EDGE('',*,*,#970,.F.); +#970 = EDGE_CURVE('',#971,#973,#975,.T.); +#971 = VERTEX_POINT('',#972); +#972 = CARTESIAN_POINT('',(0.465,3.25,0.E+000)); +#973 = VERTEX_POINT('',#974); +#974 = CARTESIAN_POINT('',(0.465,2.16,0.E+000)); +#975 = LINE('',#976,#977); +#976 = CARTESIAN_POINT('',(0.465,3.25,0.E+000)); +#977 = VECTOR('',#978,1.); +#978 = DIRECTION('',(-3.978723568754E-016,-1.,0.E+000)); +#979 = ORIENTED_EDGE('',*,*,#980,.F.); +#980 = EDGE_CURVE('',#981,#971,#983,.T.); +#981 = VERTEX_POINT('',#982); +#982 = CARTESIAN_POINT('',(0.465,3.25,0.25)); +#983 = LINE('',#984,#985); +#984 = CARTESIAN_POINT('',(0.465,3.25,0.25)); +#985 = VECTOR('',#986,1.); +#986 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#987 = ORIENTED_EDGE('',*,*,#988,.T.); +#988 = EDGE_CURVE('',#981,#738,#989,.T.); +#989 = LINE('',#990,#991); +#990 = CARTESIAN_POINT('',(0.465,3.25,0.25)); +#991 = VECTOR('',#992,1.); +#992 = DIRECTION('',(-3.978723568754E-016,-1.,0.E+000)); +#993 = ORIENTED_EDGE('',*,*,#745,.T.); +#994 = ORIENTED_EDGE('',*,*,#810,.F.); +#995 = ORIENTED_EDGE('',*,*,#996,.T.); +#996 = EDGE_CURVE('',#803,#973,#997,.T.); +#997 = LINE('',#998,#999); +#998 = CARTESIAN_POINT('',(0.465,2.16,0.25)); +#999 = VECTOR('',#1000,1.); +#1000 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#1001 = PLANE('',#1002); +#1002 = AXIS2_PLACEMENT_3D('',#1003,#1004,#1005); +#1003 = CARTESIAN_POINT('',(0.465,3.25,0.25)); +#1004 = DIRECTION('',(1.,-3.978723568754E-016,0.E+000)); +#1005 = DIRECTION('',(3.978723568754E-016,1.,0.E+000)); +#1006 = ADVANCED_FACE('',(#1007),#1025,.T.); +#1007 = FACE_BOUND('',#1008,.T.); +#1008 = EDGE_LOOP('',(#1009,#1017,#1018,#1019)); +#1009 = ORIENTED_EDGE('',*,*,#1010,.T.); +#1010 = EDGE_CURVE('',#1011,#981,#1013,.T.); +#1011 = VERTEX_POINT('',#1012); +#1012 = CARTESIAN_POINT('',(1.665,3.25,0.25)); +#1013 = LINE('',#1014,#1015); +#1014 = CARTESIAN_POINT('',(0.465,3.25,0.25)); +#1015 = VECTOR('',#1016,1.); +#1016 = DIRECTION('',(-1.,3.614007241618E-016,0.E+000)); +#1017 = ORIENTED_EDGE('',*,*,#988,.T.); +#1018 = ORIENTED_EDGE('',*,*,#737,.T.); +#1019 = ORIENTED_EDGE('',*,*,#1020,.T.); +#1020 = EDGE_CURVE('',#730,#1011,#1021,.T.); +#1021 = LINE('',#1022,#1023); +#1022 = CARTESIAN_POINT('',(1.665,3.25,0.25)); +#1023 = VECTOR('',#1024,1.); +#1024 = DIRECTION('',(0.E+000,1.,0.E+000)); +#1025 = PLANE('',#1026); +#1026 = AXIS2_PLACEMENT_3D('',#1027,#1028,#1029); +#1027 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.25)); +#1028 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1029 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1030 = ADVANCED_FACE('',(#1031),#1058,.F.); +#1031 = FACE_BOUND('',#1032,.F.); +#1032 = EDGE_LOOP('',(#1033,#1043,#1049,#1050,#1051,#1052)); +#1033 = ORIENTED_EDGE('',*,*,#1034,.F.); +#1034 = EDGE_CURVE('',#1035,#1037,#1039,.T.); +#1035 = VERTEX_POINT('',#1036); +#1036 = CARTESIAN_POINT('',(1.665,2.16,0.E+000)); +#1037 = VERTEX_POINT('',#1038); +#1038 = CARTESIAN_POINT('',(1.665,3.25,0.E+000)); +#1039 = LINE('',#1040,#1041); +#1040 = CARTESIAN_POINT('',(1.665,3.25,0.E+000)); +#1041 = VECTOR('',#1042,1.); +#1042 = DIRECTION('',(0.E+000,1.,0.E+000)); +#1043 = ORIENTED_EDGE('',*,*,#1044,.F.); +#1044 = EDGE_CURVE('',#795,#1035,#1045,.T.); +#1045 = LINE('',#1046,#1047); +#1046 = CARTESIAN_POINT('',(1.665,2.16,0.25)); +#1047 = VECTOR('',#1048,1.); +#1048 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#1049 = ORIENTED_EDGE('',*,*,#794,.F.); +#1050 = ORIENTED_EDGE('',*,*,#729,.T.); +#1051 = ORIENTED_EDGE('',*,*,#1020,.T.); +#1052 = ORIENTED_EDGE('',*,*,#1053,.T.); +#1053 = EDGE_CURVE('',#1011,#1037,#1054,.T.); +#1054 = LINE('',#1055,#1056); +#1055 = CARTESIAN_POINT('',(1.665,3.25,0.25)); +#1056 = VECTOR('',#1057,1.); +#1057 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#1058 = PLANE('',#1059); +#1059 = AXIS2_PLACEMENT_3D('',#1060,#1061,#1062); +#1060 = CARTESIAN_POINT('',(1.665,3.25,0.25)); +#1061 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1062 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1063 = ADVANCED_FACE('',(#1064),#1075,.F.); +#1064 = FACE_BOUND('',#1065,.F.); +#1065 = EDGE_LOOP('',(#1066,#1072,#1073,#1074)); +#1066 = ORIENTED_EDGE('',*,*,#1067,.F.); +#1067 = EDGE_CURVE('',#876,#938,#1068,.T.); +#1068 = LINE('',#1069,#1070); +#1069 = CARTESIAN_POINT('',(-1.665,2.16,0.E+000)); +#1070 = VECTOR('',#1071,1.); +#1071 = DIRECTION('',(1.,3.614007241618E-016,0.E+000)); +#1072 = ORIENTED_EDGE('',*,*,#899,.F.); +#1073 = ORIENTED_EDGE('',*,*,#825,.F.); +#1074 = ORIENTED_EDGE('',*,*,#947,.T.); +#1075 = PLANE('',#1076); +#1076 = AXIS2_PLACEMENT_3D('',#1077,#1078,#1079); +#1077 = CARTESIAN_POINT('',(-1.665,2.16,0.25)); +#1078 = DIRECTION('',(-3.614007241618E-016,1.,0.E+000)); +#1079 = DIRECTION('',(-1.,-3.614007241618E-016,0.E+000)); +#1080 = ADVANCED_FACE('',(#1081),#1092,.F.); +#1081 = FACE_BOUND('',#1082,.F.); +#1082 = EDGE_LOOP('',(#1083,#1089,#1090,#1091)); +#1083 = ORIENTED_EDGE('',*,*,#1084,.F.); +#1084 = EDGE_CURVE('',#973,#1035,#1085,.T.); +#1085 = LINE('',#1086,#1087); +#1086 = CARTESIAN_POINT('',(0.465,2.16,0.E+000)); +#1087 = VECTOR('',#1088,1.); +#1088 = DIRECTION('',(1.,-3.614007241618E-016,0.E+000)); +#1089 = ORIENTED_EDGE('',*,*,#996,.F.); +#1090 = ORIENTED_EDGE('',*,*,#802,.F.); +#1091 = ORIENTED_EDGE('',*,*,#1044,.T.); +#1092 = PLANE('',#1093); +#1093 = AXIS2_PLACEMENT_3D('',#1094,#1095,#1096); +#1094 = CARTESIAN_POINT('',(0.465,2.16,0.25)); +#1095 = DIRECTION('',(3.614007241618E-016,1.,0.E+000)); +#1096 = DIRECTION('',(-1.,3.614007241618E-016,0.E+000)); +#1097 = ADVANCED_FACE('',(#1098),#1109,.F.); +#1098 = FACE_BOUND('',#1099,.T.); +#1099 = EDGE_LOOP('',(#1100,#1101,#1107,#1108)); +#1100 = ORIENTED_EDGE('',*,*,#873,.F.); +#1101 = ORIENTED_EDGE('',*,*,#1102,.F.); +#1102 = EDGE_CURVE('',#940,#874,#1103,.T.); +#1103 = LINE('',#1104,#1105); +#1104 = CARTESIAN_POINT('',(-1.665,3.25,0.E+000)); +#1105 = VECTOR('',#1106,1.); +#1106 = DIRECTION('',(-1.,-3.614007241618E-016,-0.E+000)); +#1107 = ORIENTED_EDGE('',*,*,#937,.F.); +#1108 = ORIENTED_EDGE('',*,*,#1067,.F.); +#1109 = PLANE('',#1110); +#1110 = AXIS2_PLACEMENT_3D('',#1111,#1112,#1113); +#1111 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#1112 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1113 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1114 = ADVANCED_FACE('',(#1115),#1121,.F.); +#1115 = FACE_BOUND('',#1116,.T.); +#1116 = EDGE_LOOP('',(#1117,#1118,#1119,#1120)); +#1117 = ORIENTED_EDGE('',*,*,#1102,.T.); +#1118 = ORIENTED_EDGE('',*,*,#883,.F.); +#1119 = ORIENTED_EDGE('',*,*,#913,.F.); +#1120 = ORIENTED_EDGE('',*,*,#956,.T.); +#1121 = PLANE('',#1122); +#1122 = AXIS2_PLACEMENT_3D('',#1123,#1124,#1125); +#1123 = CARTESIAN_POINT('',(-1.665,3.25,0.25)); +#1124 = DIRECTION('',(3.614007241618E-016,-1.,0.E+000)); +#1125 = DIRECTION('',(1.,3.614007241618E-016,0.E+000)); +#1126 = ADVANCED_FACE('',(#1127),#1138,.F.); +#1127 = FACE_BOUND('',#1128,.T.); +#1128 = EDGE_LOOP('',(#1129,#1130,#1136,#1137)); +#1129 = ORIENTED_EDGE('',*,*,#970,.F.); +#1130 = ORIENTED_EDGE('',*,*,#1131,.F.); +#1131 = EDGE_CURVE('',#1037,#971,#1132,.T.); +#1132 = LINE('',#1133,#1134); +#1133 = CARTESIAN_POINT('',(0.465,3.25,0.E+000)); +#1134 = VECTOR('',#1135,1.); +#1135 = DIRECTION('',(-1.,3.614007241618E-016,0.E+000)); +#1136 = ORIENTED_EDGE('',*,*,#1034,.F.); +#1137 = ORIENTED_EDGE('',*,*,#1084,.F.); +#1138 = PLANE('',#1139); +#1139 = AXIS2_PLACEMENT_3D('',#1140,#1141,#1142); +#1140 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#1141 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1142 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1143 = ADVANCED_FACE('',(#1144),#1150,.F.); +#1144 = FACE_BOUND('',#1145,.T.); +#1145 = EDGE_LOOP('',(#1146,#1147,#1148,#1149)); +#1146 = ORIENTED_EDGE('',*,*,#1131,.T.); +#1147 = ORIENTED_EDGE('',*,*,#980,.F.); +#1148 = ORIENTED_EDGE('',*,*,#1010,.F.); +#1149 = ORIENTED_EDGE('',*,*,#1053,.T.); +#1150 = PLANE('',#1151); +#1151 = AXIS2_PLACEMENT_3D('',#1152,#1153,#1154); +#1152 = CARTESIAN_POINT('',(0.465,3.25,0.25)); +#1153 = DIRECTION('',(-3.614007241618E-016,-1.,0.E+000)); +#1154 = DIRECTION('',(1.,-3.614007241618E-016,0.E+000)); +#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1159)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1156,#1157,#1158)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1156 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1157 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1158 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1159 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#1156, + 'distance_accuracy_value','confusion accuracy'); +#1160 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#1161 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #1162,#1170,#1178,#1185,#1192,#1199,#1206,#1213,#1220,#1227,#1234, + #1241,#1248,#1255,#1262,#1269,#1276,#1283,#1290,#1297,#1304,#1311, + #1318,#1325,#1332,#1339,#1346,#1353,#1360,#1367,#1374,#1381,#1388, + #1395,#1402,#1409),#1155); +#1162 = STYLED_ITEM('color',(#1163),#17); +#1163 = PRESENTATION_STYLE_ASSIGNMENT((#1164)); +#1164 = SURFACE_STYLE_USAGE(.BOTH.,#1165); +#1165 = SURFACE_SIDE_STYLE('',(#1166)); +#1166 = SURFACE_STYLE_FILL_AREA(#1167); +#1167 = FILL_AREA_STYLE('',(#1168)); +#1168 = FILL_AREA_STYLE_COLOUR('',#1169); +#1169 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#1170 = STYLED_ITEM('color',(#1171),#57); +#1171 = PRESENTATION_STYLE_ASSIGNMENT((#1172)); +#1172 = SURFACE_STYLE_USAGE(.BOTH.,#1173); +#1173 = SURFACE_SIDE_STYLE('',(#1174)); +#1174 = SURFACE_STYLE_FILL_AREA(#1175); +#1175 = FILL_AREA_STYLE('',(#1176)); +#1176 = FILL_AREA_STYLE_COLOUR('',#1177); +#1177 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#1178 = STYLED_ITEM('color',(#1179),#104); +#1179 = PRESENTATION_STYLE_ASSIGNMENT((#1180)); +#1180 = SURFACE_STYLE_USAGE(.BOTH.,#1181); +#1181 = SURFACE_SIDE_STYLE('',(#1182)); +#1182 = SURFACE_STYLE_FILL_AREA(#1183); +#1183 = FILL_AREA_STYLE('',(#1184)); +#1184 = FILL_AREA_STYLE_COLOUR('',#1169); +#1185 = STYLED_ITEM('color',(#1186),#128); +#1186 = PRESENTATION_STYLE_ASSIGNMENT((#1187)); +#1187 = SURFACE_STYLE_USAGE(.BOTH.,#1188); +#1188 = SURFACE_SIDE_STYLE('',(#1189)); +#1189 = SURFACE_STYLE_FILL_AREA(#1190); +#1190 = FILL_AREA_STYLE('',(#1191)); +#1191 = FILL_AREA_STYLE_COLOUR('',#1169); +#1192 = STYLED_ITEM('color',(#1193),#216); +#1193 = PRESENTATION_STYLE_ASSIGNMENT((#1194)); +#1194 = SURFACE_STYLE_USAGE(.BOTH.,#1195); +#1195 = SURFACE_SIDE_STYLE('',(#1196)); +#1196 = SURFACE_STYLE_FILL_AREA(#1197); +#1197 = FILL_AREA_STYLE('',(#1198)); +#1198 = FILL_AREA_STYLE_COLOUR('',#1169); +#1199 = STYLED_ITEM('color',(#1200),#249); +#1200 = PRESENTATION_STYLE_ASSIGNMENT((#1201)); +#1201 = SURFACE_STYLE_USAGE(.BOTH.,#1202); +#1202 = SURFACE_SIDE_STYLE('',(#1203)); +#1203 = SURFACE_STYLE_FILL_AREA(#1204); +#1204 = FILL_AREA_STYLE('',(#1205)); +#1205 = FILL_AREA_STYLE_COLOUR('',#1177); +#1206 = STYLED_ITEM('color',(#1207),#305); +#1207 = PRESENTATION_STYLE_ASSIGNMENT((#1208)); +#1208 = SURFACE_STYLE_USAGE(.BOTH.,#1209); +#1209 = SURFACE_SIDE_STYLE('',(#1210)); +#1210 = SURFACE_STYLE_FILL_AREA(#1211); +#1211 = FILL_AREA_STYLE('',(#1212)); +#1212 = FILL_AREA_STYLE_COLOUR('',#1177); +#1213 = STYLED_ITEM('color',(#1214),#361); +#1214 = PRESENTATION_STYLE_ASSIGNMENT((#1215)); +#1215 = SURFACE_STYLE_USAGE(.BOTH.,#1216); +#1216 = SURFACE_SIDE_STYLE('',(#1217)); +#1217 = SURFACE_STYLE_FILL_AREA(#1218); +#1218 = FILL_AREA_STYLE('',(#1219)); +#1219 = FILL_AREA_STYLE_COLOUR('',#1169); +#1220 = STYLED_ITEM('color',(#1221),#387); +#1221 = PRESENTATION_STYLE_ASSIGNMENT((#1222)); +#1222 = SURFACE_STYLE_USAGE(.BOTH.,#1223); +#1223 = SURFACE_SIDE_STYLE('',(#1224)); +#1224 = SURFACE_STYLE_FILL_AREA(#1225); +#1225 = FILL_AREA_STYLE('',(#1226)); +#1226 = FILL_AREA_STYLE_COLOUR('',#1169); +#1227 = STYLED_ITEM('color',(#1228),#411); +#1228 = PRESENTATION_STYLE_ASSIGNMENT((#1229)); +#1229 = SURFACE_STYLE_USAGE(.BOTH.,#1230); +#1230 = SURFACE_SIDE_STYLE('',(#1231)); +#1231 = SURFACE_STYLE_FILL_AREA(#1232); +#1232 = FILL_AREA_STYLE('',(#1233)); +#1233 = FILL_AREA_STYLE_COLOUR('',#1169); +#1234 = STYLED_ITEM('color',(#1235),#458); +#1235 = PRESENTATION_STYLE_ASSIGNMENT((#1236)); +#1236 = SURFACE_STYLE_USAGE(.BOTH.,#1237); +#1237 = SURFACE_SIDE_STYLE('',(#1238)); +#1238 = SURFACE_STYLE_FILL_AREA(#1239); +#1239 = FILL_AREA_STYLE('',(#1240)); +#1240 = FILL_AREA_STYLE_COLOUR('',#1169); +#1241 = STYLED_ITEM('color',(#1242),#482); +#1242 = PRESENTATION_STYLE_ASSIGNMENT((#1243)); +#1243 = SURFACE_STYLE_USAGE(.BOTH.,#1244); +#1244 = SURFACE_SIDE_STYLE('',(#1245)); +#1245 = SURFACE_STYLE_FILL_AREA(#1246); +#1246 = FILL_AREA_STYLE('',(#1247)); +#1247 = FILL_AREA_STYLE_COLOUR('',#1169); +#1248 = STYLED_ITEM('color',(#1249),#522); +#1249 = PRESENTATION_STYLE_ASSIGNMENT((#1250)); +#1250 = SURFACE_STYLE_USAGE(.BOTH.,#1251); +#1251 = SURFACE_SIDE_STYLE('',(#1252)); +#1252 = SURFACE_STYLE_FILL_AREA(#1253); +#1253 = FILL_AREA_STYLE('',(#1254)); +#1254 = FILL_AREA_STYLE_COLOUR('',#1169); +#1255 = STYLED_ITEM('color',(#1256),#546); +#1256 = PRESENTATION_STYLE_ASSIGNMENT((#1257)); +#1257 = SURFACE_STYLE_USAGE(.BOTH.,#1258); +#1258 = SURFACE_SIDE_STYLE('',(#1259)); +#1259 = SURFACE_STYLE_FILL_AREA(#1260); +#1260 = FILL_AREA_STYLE('',(#1261)); +#1261 = FILL_AREA_STYLE_COLOUR('',#1169); +#1262 = STYLED_ITEM('color',(#1263),#570); +#1263 = PRESENTATION_STYLE_ASSIGNMENT((#1264)); +#1264 = SURFACE_STYLE_USAGE(.BOTH.,#1265); +#1265 = SURFACE_SIDE_STYLE('',(#1266)); +#1266 = SURFACE_STYLE_FILL_AREA(#1267); +#1267 = FILL_AREA_STYLE('',(#1268)); +#1268 = FILL_AREA_STYLE_COLOUR('',#1169); +#1269 = STYLED_ITEM('color',(#1270),#601); +#1270 = PRESENTATION_STYLE_ASSIGNMENT((#1271)); +#1271 = SURFACE_STYLE_USAGE(.BOTH.,#1272); +#1272 = SURFACE_SIDE_STYLE('',(#1273)); +#1273 = SURFACE_STYLE_FILL_AREA(#1274); +#1274 = FILL_AREA_STYLE('',(#1275)); +#1275 = FILL_AREA_STYLE_COLOUR('',#1169); +#1276 = STYLED_ITEM('color',(#1277),#618); +#1277 = PRESENTATION_STYLE_ASSIGNMENT((#1278)); +#1278 = SURFACE_STYLE_USAGE(.BOTH.,#1279); +#1279 = SURFACE_SIDE_STYLE('',(#1280)); +#1280 = SURFACE_STYLE_FILL_AREA(#1281); +#1281 = FILL_AREA_STYLE('',(#1282)); +#1282 = FILL_AREA_STYLE_COLOUR('',#1169); +#1283 = STYLED_ITEM('color',(#1284),#630); +#1284 = PRESENTATION_STYLE_ASSIGNMENT((#1285)); +#1285 = SURFACE_STYLE_USAGE(.BOTH.,#1286); +#1286 = SURFACE_SIDE_STYLE('',(#1287)); +#1287 = SURFACE_STYLE_FILL_AREA(#1288); +#1288 = FILL_AREA_STYLE('',(#1289)); +#1289 = FILL_AREA_STYLE_COLOUR('',#1177); +#1290 = STYLED_ITEM('color',(#1291),#654); +#1291 = PRESENTATION_STYLE_ASSIGNMENT((#1292)); +#1292 = SURFACE_STYLE_USAGE(.BOTH.,#1293); +#1293 = SURFACE_SIDE_STYLE('',(#1294)); +#1294 = SURFACE_STYLE_FILL_AREA(#1295); +#1295 = FILL_AREA_STYLE('',(#1296)); +#1296 = FILL_AREA_STYLE_COLOUR('',#1177); +#1297 = STYLED_ITEM('color',(#1298),#673); +#1298 = PRESENTATION_STYLE_ASSIGNMENT((#1299)); +#1299 = SURFACE_STYLE_USAGE(.BOTH.,#1300); +#1300 = SURFACE_SIDE_STYLE('',(#1301)); +#1301 = SURFACE_STYLE_FILL_AREA(#1302); +#1302 = FILL_AREA_STYLE('',(#1303)); +#1303 = FILL_AREA_STYLE_COLOUR('',#1177); +#1304 = STYLED_ITEM('color',(#1305),#706); +#1305 = PRESENTATION_STYLE_ASSIGNMENT((#1306)); +#1306 = SURFACE_STYLE_USAGE(.BOTH.,#1307); +#1307 = SURFACE_SIDE_STYLE('',(#1308)); +#1308 = SURFACE_STYLE_FILL_AREA(#1309); +#1309 = FILL_AREA_STYLE('',(#1310)); +#1310 = FILL_AREA_STYLE_COLOUR('',#1177); +#1311 = STYLED_ITEM('color',(#1312),#787); +#1312 = PRESENTATION_STYLE_ASSIGNMENT((#1313)); +#1313 = SURFACE_STYLE_USAGE(.BOTH.,#1314); +#1314 = SURFACE_SIDE_STYLE('',(#1315)); +#1315 = SURFACE_STYLE_FILL_AREA(#1316); +#1316 = FILL_AREA_STYLE('',(#1317)); +#1317 = FILL_AREA_STYLE_COLOUR('',#1177); +#1318 = STYLED_ITEM('color',(#1319),#845); +#1319 = PRESENTATION_STYLE_ASSIGNMENT((#1320)); +#1320 = SURFACE_STYLE_USAGE(.BOTH.,#1321); +#1321 = SURFACE_SIDE_STYLE('',(#1322)); +#1322 = SURFACE_STYLE_FILL_AREA(#1323); +#1323 = FILL_AREA_STYLE('',(#1324)); +#1324 = FILL_AREA_STYLE_COLOUR('',#1169); +#1325 = STYLED_ITEM('color',(#1326),#857); +#1326 = PRESENTATION_STYLE_ASSIGNMENT((#1327)); +#1327 = SURFACE_STYLE_USAGE(.BOTH.,#1328); +#1328 = SURFACE_SIDE_STYLE('',(#1329)); +#1329 = SURFACE_STYLE_FILL_AREA(#1330); +#1330 = FILL_AREA_STYLE('',(#1331)); +#1331 = FILL_AREA_STYLE_COLOUR('',#1169); +#1332 = STYLED_ITEM('color',(#1333),#869); +#1333 = PRESENTATION_STYLE_ASSIGNMENT((#1334)); +#1334 = SURFACE_STYLE_USAGE(.BOTH.,#1335); +#1335 = SURFACE_SIDE_STYLE('',(#1336)); +#1336 = SURFACE_STYLE_FILL_AREA(#1337); +#1337 = FILL_AREA_STYLE('',(#1338)); +#1338 = FILL_AREA_STYLE_COLOUR('',#1169); +#1339 = STYLED_ITEM('color',(#1340),#909); +#1340 = PRESENTATION_STYLE_ASSIGNMENT((#1341)); +#1341 = SURFACE_STYLE_USAGE(.BOTH.,#1342); +#1342 = SURFACE_SIDE_STYLE('',(#1343)); +#1343 = SURFACE_STYLE_FILL_AREA(#1344); +#1344 = FILL_AREA_STYLE('',(#1345)); +#1345 = FILL_AREA_STYLE_COLOUR('',#1169); +#1346 = STYLED_ITEM('color',(#1347),#933); +#1347 = PRESENTATION_STYLE_ASSIGNMENT((#1348)); +#1348 = SURFACE_STYLE_USAGE(.BOTH.,#1349); +#1349 = SURFACE_SIDE_STYLE('',(#1350)); +#1350 = SURFACE_STYLE_FILL_AREA(#1351); +#1351 = FILL_AREA_STYLE('',(#1352)); +#1352 = FILL_AREA_STYLE_COLOUR('',#1169); +#1353 = STYLED_ITEM('color',(#1354),#966); +#1354 = PRESENTATION_STYLE_ASSIGNMENT((#1355)); +#1355 = SURFACE_STYLE_USAGE(.BOTH.,#1356); +#1356 = SURFACE_SIDE_STYLE('',(#1357)); +#1357 = SURFACE_STYLE_FILL_AREA(#1358); +#1358 = FILL_AREA_STYLE('',(#1359)); +#1359 = FILL_AREA_STYLE_COLOUR('',#1169); +#1360 = STYLED_ITEM('color',(#1361),#1006); +#1361 = PRESENTATION_STYLE_ASSIGNMENT((#1362)); +#1362 = SURFACE_STYLE_USAGE(.BOTH.,#1363); +#1363 = SURFACE_SIDE_STYLE('',(#1364)); +#1364 = SURFACE_STYLE_FILL_AREA(#1365); +#1365 = FILL_AREA_STYLE('',(#1366)); +#1366 = FILL_AREA_STYLE_COLOUR('',#1169); +#1367 = STYLED_ITEM('color',(#1368),#1030); +#1368 = PRESENTATION_STYLE_ASSIGNMENT((#1369)); +#1369 = SURFACE_STYLE_USAGE(.BOTH.,#1370); +#1370 = SURFACE_SIDE_STYLE('',(#1371)); +#1371 = SURFACE_STYLE_FILL_AREA(#1372); +#1372 = FILL_AREA_STYLE('',(#1373)); +#1373 = FILL_AREA_STYLE_COLOUR('',#1169); +#1374 = STYLED_ITEM('color',(#1375),#1063); +#1375 = PRESENTATION_STYLE_ASSIGNMENT((#1376)); +#1376 = SURFACE_STYLE_USAGE(.BOTH.,#1377); +#1377 = SURFACE_SIDE_STYLE('',(#1378)); +#1378 = SURFACE_STYLE_FILL_AREA(#1379); +#1379 = FILL_AREA_STYLE('',(#1380)); +#1380 = FILL_AREA_STYLE_COLOUR('',#1169); +#1381 = STYLED_ITEM('color',(#1382),#1080); +#1382 = PRESENTATION_STYLE_ASSIGNMENT((#1383)); +#1383 = SURFACE_STYLE_USAGE(.BOTH.,#1384); +#1384 = SURFACE_SIDE_STYLE('',(#1385)); +#1385 = SURFACE_STYLE_FILL_AREA(#1386); +#1386 = FILL_AREA_STYLE('',(#1387)); +#1387 = FILL_AREA_STYLE_COLOUR('',#1169); +#1388 = STYLED_ITEM('color',(#1389),#1097); +#1389 = PRESENTATION_STYLE_ASSIGNMENT((#1390)); +#1390 = SURFACE_STYLE_USAGE(.BOTH.,#1391); +#1391 = SURFACE_SIDE_STYLE('',(#1392)); +#1392 = SURFACE_STYLE_FILL_AREA(#1393); +#1393 = FILL_AREA_STYLE('',(#1394)); +#1394 = FILL_AREA_STYLE_COLOUR('',#1169); +#1395 = STYLED_ITEM('color',(#1396),#1114); +#1396 = PRESENTATION_STYLE_ASSIGNMENT((#1397)); +#1397 = SURFACE_STYLE_USAGE(.BOTH.,#1398); +#1398 = SURFACE_SIDE_STYLE('',(#1399)); +#1399 = SURFACE_STYLE_FILL_AREA(#1400); +#1400 = FILL_AREA_STYLE('',(#1401)); +#1401 = FILL_AREA_STYLE_COLOUR('',#1169); +#1402 = STYLED_ITEM('color',(#1403),#1126); +#1403 = PRESENTATION_STYLE_ASSIGNMENT((#1404)); +#1404 = SURFACE_STYLE_USAGE(.BOTH.,#1405); +#1405 = SURFACE_SIDE_STYLE('',(#1406)); +#1406 = SURFACE_STYLE_FILL_AREA(#1407); +#1407 = FILL_AREA_STYLE('',(#1408)); +#1408 = FILL_AREA_STYLE_COLOUR('',#1169); +#1409 = STYLED_ITEM('color',(#1410),#1143); +#1410 = PRESENTATION_STYLE_ASSIGNMENT((#1411)); +#1411 = SURFACE_STYLE_USAGE(.BOTH.,#1412); +#1412 = SURFACE_SIDE_STYLE('',(#1413)); +#1413 = SURFACE_STYLE_FILL_AREA(#1414); +#1414 = FILL_AREA_STYLE('',(#1415)); +#1415 = FILL_AREA_STYLE_COLOUR('',#1169); +ENDSEC; +END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>sl1045</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>sl1045</title>