SIT65HVD230DR

@@ -26,13 +26,15 @@       "model_3d_step": "sit65hvd230dr.step",       "lbr": "sit65hvd230dr.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C496619"+    },     "pins": [       {         "number": "1",         "name": "D",         "type": "input",-        "description": "CAN transmit data input (TXD, driver input). LOW drives the bus to the dominant state; HIGH leaves the bus recessive. Input current IIH ≥ -30 µA at VI=2 V, IIL ≥ -30 µA at VI=0.8 V."+        "description": "CAN transmit data input (TXD, driver input). LOW drives the bus to the dominant state; HIGH leaves the bus recessive. Input current IIH \u2265 -30 \u00b5A at VI=2 V, IIL \u2265 -30 \u00b5A at VI=0.8 V."       },       {         "number": "2",@@ -44,37 +46,37 @@         "number": "3",         "name": "VCC",         "type": "power_in",-        "description": "Transceiver 3.3 V supply voltage. Operating range 3.0 V to 3.6 V. Typical ICC ≈ 10 mA active (no load), ≈ 650 µA in standby."+        "description": "Transceiver 3.3 V supply voltage. Operating range 3.0 V to 3.6 V. Typical ICC \u2248 10 mA active (no load), \u2248 650 \u00b5A in standby."       },       {         "number": "4",         "name": "R",         "type": "output",-        "description": "CAN receive data output (RXD, receiver output). LOW indicates a dominant bus state; HIGH indicates recessive. High-level VOH ≥ 2.4 V at IO=-8 mA; low-level VOL ≤ 0.4 V at IO=8 mA."+        "description": "CAN receive data output (RXD, receiver output). LOW indicates a dominant bus state; HIGH indicates recessive. High-level VOH \u2265 2.4 V at IO=-8 mA; low-level VOL \u2264 0.4 V at IO=8 mA."       },       {         "number": "5",         "name": "Vref",         "type": "output",-        "description": "VCC/2 reference output pin. Typically 0.45·VCC to 0.55·VCC for |Iref|<5 µA (0.4·VCC to 0.6·VCC for |Iref|<50 µA). Useful as a bias reference for the CAN controller or bus filtering."+        "description": "VCC/2 reference output pin. Typically 0.45\u00b7VCC to 0.55\u00b7VCC for |Iref|<5 \u00b5A (0.4\u00b7VCC to 0.6\u00b7VCC for |Iref|<50 \u00b5A). Useful as a bias reference for the CAN controller or bus filtering."       },       {         "number": "6",         "name": "CANL",         "type": "bidirectional",-        "description": "Low-level CAN bus line. Differential I/O to the CAN bus per ISO 11898-2, driven low in dominant state and pulled to ~VCC/2 in recessive state. Withstands -18 V to +18 V DC and ±25 V transient; ESD >±15 kV HBM."+        "description": "Low-level CAN bus line. Differential I/O to the CAN bus per ISO 11898-2, driven low in dominant state and pulled to ~VCC/2 in recessive state. Withstands -18 V to +18 V DC and \u00b125 V transient; ESD >\u00b115 kV HBM."       },       {         "number": "7",         "name": "CANH",         "type": "bidirectional",-        "description": "High-level CAN bus line. Differential I/O to the CAN bus per ISO 11898-2, driven high in dominant state and pulled to ~VCC/2 in recessive state. Withstands -18 V to +18 V DC and ±25 V transient; ESD >±15 kV HBM."+        "description": "High-level CAN bus line. Differential I/O to the CAN bus per ISO 11898-2, driven high in dominant state and pulled to ~VCC/2 in recessive state. Withstands -18 V to +18 V DC and \u00b125 V transient; ESD >\u00b115 kV HBM."       },       {         "number": "8",         "name": "Rs",         "type": "input",-        "description": "Mode select pin. Strong pull-down to GND (V(Rs)<1.2 V) selects high-speed mode; strong pull-up to VCC (V(Rs)>0.75·VCC) selects low-power standby mode; a 10 kΩ to 100 kΩ pull-down to GND selects slope-control mode for reduced EMI. IRS ≥ -450 µA when V(Rs)<1 V."+        "description": "Mode select pin. Strong pull-down to GND (V(Rs)<1.2 V) selects high-speed mode; strong pull-up to VCC (V(Rs)>0.75\u00b7VCC) selects low-power standby mode; a 10 k\u03a9 to 100 k\u03a9 pull-down to GND selects slope-control mode for reduced EMI. IRS \u2265 -450 \u00b5A when V(Rs)<1 V."       }     ],     "provenance": {

@@ -62,6 +62,18 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="SIT65HVD230DR">@@ -108,7 +120,13 @@         <connect gate="G$1" pin="CANL" pad="6"/>         <connect gate="G$1" pin="Vref" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="SIT65HVD230DR" constant="no"/>+          <attribute name="MANUFACTURER" value="SIT" constant="no"/>+          <attribute name="LCSC_PN" value="C496619" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>