component
SIT1145AQTK
Public Made by Adomby adom
SIT CAN Transceivers, DFN-14(3x4.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+5444
README.md+75docs/hero.pngdocs/sit1145aqtk-datasheet.pdfpackage.json+236page.json+242sit1145aqtk-etched.glbsit1145aqtk-hero.glbsit1145aqtk-hero.overlay.json+405sit1145aqtk.glbsit1145aqtk.kicad_mod+341sit1145aqtk.kicad_sym+73sit1145aqtk.lbr+146sit1145aqtk.step+3924viewers/footprint.html+1viewers/symbol.html+1README.mdadded+75@@ -0,0 +1,75 @@+# SIT1145AQTK++**SIT** · CAN Transceivers · DFN-14(3x4.5)++SIT1145AQTK from SIT, in a DFN-14(3x4.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TXD | input | Transmitter data input from the MCU, referenced to VIO (-0.2 V to VIO+0.2 V); a dominant timeout disables the transmitter if held low too long. |+| 2 | GND | power_in | Ground. |+| 3 | VCC | power_in | 5 V CAN bus supply, 4.5 V to 5.5 V recommended, absolute maximum -0.2 V to +6 V. |+| 4 | RXD | output | Receiver data output to the MCU, referenced to VIO (-0.2 V to VIO+0.2 V). |+| 5 | VIO | power_in | I/O supply for the MCU-side interface, 2.85 V to 5.5 V, supporting 3.3 V/5 V MCUs. |+| 6 | SDO | output | SPI data output, referenced to VIO (-0.2 V to VIO+0.2 V). |+| 7 | INH | output | Inhibit output switch that controls an external voltage regulator, rated -0.2 V to +40 V. |+| 8 | SCK | input | SPI clock input, referenced to VIO (-0.2 V to VIO+0.2 V). |+| 9 | WAKE | input | Local wake-up input, rated -0.2 V to +40 V; connect to GND if local wake-up is unused. |+| 10 | BAT | power_in | Battery supply input, 5.5 V to 28 V recommended, absolute maximum -0.2 V to +40 V. |+| 11 | SDI | input | SPI data input, referenced to VIO (-0.2 V to VIO+0.2 V). |+| 12 | CANL | bidirectional | Low-level CAN bus input/output, rated -58 V to +58 V. |+| 13 | CANH | bidirectional | High-level CAN bus input/output, rated -58 V to +58 V. |+| 14 | SCSN | input | SPI chip select input (active low), referenced to VIO (-0.2 V to VIO+0.2 V). |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SIT |+| Package | DFN-14(3x4.5) |+| Category | Interface |+| Pins | 15 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| 电池电源电压 | BAT | 5.5 | | 28 | V | | 2 |+| 供电电压 | VCC | 4.5 | | 5.5 | V | | 2 |+| MCU侧端口电压 | VIO | 2.85 | | 5.5 | V | | 2 |+| 最大传输速率 | 1/tbit | | | 5 | Mbaud | 非归零码 | 2 |+| CANH、CANL 输入输出电压 | Vcan | -58 | | 58 | V | | 2 |+| 总线差分电压 | Vdiff | 1.5 | | 3 | V | | 2 |+| 结温 | Tj | -40 | | 150 | ℃ | | 2 |+| 电池电源电压 | BAT | -0.2 | | 40 | V | | 2 |+| 总线电源电压 | VCC，VIO | -0.2 | | 6 | V | | 2 |+| 控制引脚电压 | WAKE，INH | -0.2 | | 40 | V | | 2 |+| MCU侧端口 TXD，RXD，SDI，SDO，SCK，SCSN | | -0.2 | | | V | | 2 |+| 总线侧输入电压 | CANL，CANH | -58 | | 58 | V | | 2 |+| 存储工作温度范围 | | -55 | | 150 | ℃ | | 2 |+| 结温 | Tj | -40 | | 150 | ℃ | | 2 |+| 总线端接触放电 | VESD_IEC | -6 | | 6 | kV | | 2 |+| 总线端接 HBM | VESD_HBM | -8 | | 8 | kV | | 2 |++## CAD (KiCad official)++- Symbol: `SIT1145AQTK`+- Footprint: `Package_DFN_QFN:DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm`+- 3D model: DFN-14(3x4.5) (KiCad packages3D, STEP)+- 3D model files: `sit1145aqtk-etched.step` / `sit1145aqtk-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sit1145aqtk.step` / `sit1145aqtk.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SIT datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590902597878697984) (12 pp, sha256 `c5eea4058af7465c`, retrieved 2026-10-20, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sit1145aqtk-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/sit1145aqtk-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+236@@ -0,0 +1,236 @@+{+ "slug": "sit1145aqtk",+ "version": "0.1.0",+ "type": "component",+ "description": "SIT CAN Transceivers, DFN-14(3x4.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "sit1145aqtk",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sit1145aqtk.kicad_sym",+ "sit1145aqtk.kicad_mod",+ "sit1145aqtk.glb",+ "sit1145aqtk.step",+ "sit1145aqtk.lbr",+ "docs/hero.png",+ "docs/sit1145aqtk-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sit1145aqtk-hero.glb",+ "sit1145aqtk-hero.overlay.json",+ "sit1145aqtk-etched.glb"+ ],+ "component": {+ "mpn": "SIT1145AQTK",+ "manufacturer": "SIT",+ "package": "DFN-14(3x4.5)",+ "pin_count": 15,+ "category": "Interface",+ "subcategory": "CAN Transceivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590902597878697984",+ "parts": {+ "symbol": "sit1145aqtk.kicad_sym",+ "footprint": "sit1145aqtk.kicad_mod",+ "model_3d": "sit1145aqtk-hero.glb",+ "model_3d_plain": "sit1145aqtk-etched.glb",+ "model_3d_step": "sit1145aqtk-etched.step",+ "model_3d_step_plain": "sit1145aqtk.step",+ "lbr": "sit1145aqtk.lbr"+ },+ "distributor_links": {+ "lcsc": "C5382540"+ },+ "distributor_check": {+ "checked_at": "2026-10-20T10:48:32Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "TXD",+ "type": "input",+ "description": "Transmitter data input from the MCU, referenced to VIO (-0.2 V to VIO+0.2 V); a dominant timeout disables the transmitter if held low too long."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "5 V CAN bus supply, 4.5 V to 5.5 V recommended, absolute maximum -0.2 V to +6 V."+ },+ {+ "number": "4",+ "name": "RXD",+ "type": "output",+ "description": "Receiver data output to the MCU, referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "5",+ "name": "VIO",+ "type": "power_in",+ "description": "I/O supply for the MCU-side interface, 2.85 V to 5.5 V, supporting 3.3 V/5 V MCUs."+ },+ {+ "number": "6",+ "name": "SDO",+ "type": "output",+ "description": "SPI data output, referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "7",+ "name": "INH",+ "type": "output",+ "description": "Inhibit output switch that controls an external voltage regulator, rated -0.2 V to +40 V."+ },+ {+ "number": "8",+ "name": "SCK",+ "type": "input",+ "description": "SPI clock input, referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "9",+ "name": "WAKE",+ "type": "input",+ "description": "Local wake-up input, rated -0.2 V to +40 V; connect to GND if local wake-up is unused."+ },+ {+ "number": "10",+ "name": "BAT",+ "type": "power_in",+ "description": "Battery supply input, 5.5 V to 28 V recommended, absolute maximum -0.2 V to +40 V."+ },+ {+ "number": "11",+ "name": "SDI",+ "type": "input",+ "description": "SPI data input, referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "12",+ "name": "CANL",+ "type": "bidirectional",+ "description": "Low-level CAN bus input/output, rated -58 V to +58 V."+ },+ {+ "number": "13",+ "name": "CANH",+ "type": "bidirectional",+ "description": "High-level CAN bus input/output, rated -58 V to +58 V."+ },+ {+ "number": "14",+ "name": "SCSN",+ "type": "input",+ "description": "SPI chip select input (active low), referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The DFN14 package drawing and pinout diagram show an exposed thermal pad, but the datasheet gives it; The pin function table appears only once, for the SOP14 pinout (page 3). The DFN14 pinout on page 2 ",+ "exposed pad 15 added from the footprint",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 12,+ "cost_usd": 0.1647,+ "at": "2026-10-20T10:48:14"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590902597878697984",+ "pages": 12,+ "sha256": "c5eea4058af7465c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sit1145aqtk.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 4.4,+ 0.6+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "8079d62f5b9e1cd0308689c1e51508513555e4adea6121b173ad6c80909f9944",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sit1145aqtk-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 4.4,+ 0.6+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "74516e6c596288924d6ebe5b80d9c1e948ac5a7fc858fdb09cdf8404bcd2a660",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+242@@ -0,0 +1,242 @@+{+ "slug": "sit1145aqtk",+ "version": "0.1.0",+ "type": "component",+ "description": "SIT CAN Transceivers, DFN-14(3x4.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "sit1145aqtk",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sit1145aqtk.kicad_sym",+ "sit1145aqtk.kicad_mod",+ "sit1145aqtk.glb",+ "sit1145aqtk.step",+ "sit1145aqtk.lbr",+ "docs/hero.png",+ "docs/sit1145aqtk-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sit1145aqtk-hero.glb",+ "sit1145aqtk-hero.overlay.json",+ "sit1145aqtk-etched.glb"+ ],+ "component": {+ "mpn": "SIT1145AQTK",+ "manufacturer": "SIT",+ "package": "DFN-14(3x4.5)",+ "pin_count": 15,+ "category": "Interface",+ "subcategory": "CAN Transceivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590902597878697984",+ "parts": {+ "symbol": "sit1145aqtk.kicad_sym",+ "footprint": "sit1145aqtk.kicad_mod",+ "model_3d": "sit1145aqtk-hero.glb",+ "model_3d_plain": "sit1145aqtk-etched.glb",+ "model_3d_step": "sit1145aqtk-etched.step",+ "model_3d_step_plain": "sit1145aqtk.step",+ "lbr": "sit1145aqtk.lbr"+ },+ "distributor_links": {+ "lcsc": "C5382540"+ },+ "distributor_check": {+ "checked_at": "2026-10-20T10:48:32Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "TXD",+ "type": "input",+ "description": "Transmitter data input from the MCU, referenced to VIO (-0.2 V to VIO+0.2 V); a dominant timeout disables the transmitter if held low too long."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "5 V CAN bus supply, 4.5 V to 5.5 V recommended, absolute maximum -0.2 V to +6 V."+ },+ {+ "number": "4",+ "name": "RXD",+ "type": "output",+ "description": "Receiver data output to the MCU, referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "5",+ "name": "VIO",+ "type": "power_in",+ "description": "I/O supply for the MCU-side interface, 2.85 V to 5.5 V, supporting 3.3 V/5 V MCUs."+ },+ {+ "number": "6",+ "name": "SDO",+ "type": "output",+ "description": "SPI data output, referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "7",+ "name": "INH",+ "type": "output",+ "description": "Inhibit output switch that controls an external voltage regulator, rated -0.2 V to +40 V."+ },+ {+ "number": "8",+ "name": "SCK",+ "type": "input",+ "description": "SPI clock input, referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "9",+ "name": "WAKE",+ "type": "input",+ "description": "Local wake-up input, rated -0.2 V to +40 V; connect to GND if local wake-up is unused."+ },+ {+ "number": "10",+ "name": "BAT",+ "type": "power_in",+ "description": "Battery supply input, 5.5 V to 28 V recommended, absolute maximum -0.2 V to +40 V."+ },+ {+ "number": "11",+ "name": "SDI",+ "type": "input",+ "description": "SPI data input, referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "12",+ "name": "CANL",+ "type": "bidirectional",+ "description": "Low-level CAN bus input/output, rated -58 V to +58 V."+ },+ {+ "number": "13",+ "name": "CANH",+ "type": "bidirectional",+ "description": "High-level CAN bus input/output, rated -58 V to +58 V."+ },+ {+ "number": "14",+ "name": "SCSN",+ "type": "input",+ "description": "SPI chip select input (active low), referenced to VIO (-0.2 V to VIO+0.2 V)."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The DFN14 package drawing and pinout diagram show an exposed thermal pad, but the datasheet gives it; The pin function table appears only once, for the SOP14 pinout (page 3). The DFN14 pinout on page 2 ",+ "exposed pad 15 added from the footprint",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 12,+ "cost_usd": 0.1647,+ "at": "2026-10-20T10:48:14"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590902597878697984",+ "pages": 12,+ "sha256": "c5eea4058af7465c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sit1145aqtk.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 4.4,+ 0.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "8079d62f5b9e1cd0308689c1e51508513555e4adea6121b173ad6c80909f9944",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sit1145aqtk-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 4.4,+ 0.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "74516e6c596288924d6ebe5b80d9c1e948ac5a7fc858fdb09cdf8404bcd2a660",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
sit1145aqtk-etched.glbadded⋯ 1 unchanged line ⋯
sit1145aqtk-hero.glbadded⋯ 1 unchanged line ⋯
sit1145aqtk-hero.overlay.jsonadded+405@@ -0,0 +1,405 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "SIT1145AQTK",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 15,+ "span_mm": 8.15,+ "dash_mm": 0.2038,+ "gap_mm": 0.1222,+ "pad_stroke_mm": 0.0489+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 14,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.34,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.5,+ 1.5,+ -2.125,+ 2.125+ ],+ "pads_bbox_mm": [+ -1.925,+ 1.925,+ -2.125,+ 2.125+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "sit1145aqtk-etched.glb",+ "glb_sha256": "354f50ea82c6342216078e2d8e5c852e885e8ddfcd4a20ab53d42dcbb1b7eaaf",+ "footprint": "sit1145aqtk.kicad_mod",+ "footprint_sha256": "e26f11fcd4e47856a1ffdc247fc3ffdc28f5c3a61d1ebb4fa830a8c3bbf4f3b6",+ "pins": "page.json component.pins",+ "pins_sha256": "02c24061a73b7ef8a8334c9a9d206ec5a9d052a9e416bbb5c19bf2c623282571"+ },+ "generator": "adom-wiki 1.7.75 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "TXD",+ "x": -2.025,+ "y": -1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "GND",+ "x": -2.025,+ "y": -1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "VCC",+ "x": -2.025,+ "y": -0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "RXD",+ "x": -2.025,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "VIO",+ "x": -2.025,+ "y": 0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "SDO",+ "x": -2.025,+ "y": 1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "INH",+ "x": -2.025,+ "y": 1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "SCK",+ "x": 2.025,+ "y": 1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "WAKE",+ "x": 2.025,+ "y": 1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "BAT",+ "x": 2.025,+ "y": 0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "SDI",+ "x": 2.025,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "CANL",+ "x": 2.025,+ "y": -0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "CANH",+ "x": 2.025,+ "y": -1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "SCSN",+ "x": 2.025,+ "y": -1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "oval",+ "center_mm": [+ -1.5,+ -1.95+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "oval",+ "center_mm": [+ -1.5,+ -1.3+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "oval",+ "center_mm": [+ -1.5,+ -0.65+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "oval",+ "center_mm": [+ -1.5,+ 0.0+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "oval",+ "center_mm": [+ -1.5,+ 0.65+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "oval",+ "center_mm": [+ -1.5,+ 1.3+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "oval",+ "center_mm": [+ -1.5,+ 1.95+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "oval",+ "center_mm": [+ 1.5,+ 1.95+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "oval",+ "center_mm": [+ 1.5,+ 1.3+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "oval",+ "center_mm": [+ 1.5,+ 0.65+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "oval",+ "center_mm": [+ 1.5,+ 0.0+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "oval",+ "center_mm": [+ 1.5,+ -0.65+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "oval",+ "center_mm": [+ 1.5,+ -1.3+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "oval",+ "center_mm": [+ 1.5,+ -1.95+ ],+ "size_mm": [+ 0.85,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.65,+ 4.25+ ],+ "rot": 0.0+ }+ ]+}
sit1145aqtk.glbadded⋯ 1 unchanged line ⋯
sit1145aqtk.kicad_modadded+341@@ -0,0 +1,341 @@+(footprint "DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "14-lead very thin plastic quad flat, 3.0x4.5mm size, 0.65mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/14L_VDFN_4_5x3_0mm_JHA_C041198A.pdf)")+ (tags "VDFN DFN 0.65mm")+ (property "Reference" "REF**"+ (at 0 -3.45 0)+ (layer "F.SilkS")+ (uuid "518991b8-a937-499e-8c4e-bb79190d3704")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm"+ (at 0 3.65 0)+ (layer "F.Fab")+ (uuid "26bb6669-55f7-4382-8371-692bc331d1c5")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "5e3e1702-2b2d-4ee5-9bac-031dc004864e")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "d1b410de-19e5-4df1-a148-d33caa5fa7d7")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -1.5 2.36)+ (end 1.5 2.36)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "5a889410-cab1-4b15-88b3-df93d13a66d9")+ )+ (fp_line+ (start 1.5 -2.36)+ (end -1.5 -2.36)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "56d2fd92-3f08-4b6b-bffa-dbdab14cafd1")+ )+ (fp_poly+ (pts+ (xy -2.07 -2.26) (xy -2.55 -2.26) (xy -2.07 -2.74) (xy -2.07 -2.26)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "55beea37-d5fd-405f-b602-138007373e66")+ )+ (fp_line+ (start -2.18 -2.5)+ (end -2.18 2.5)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "eeec0310-15f0-4e96-8815-02e22d6f9ca0")+ )+ (fp_line+ (start -2.18 2.5)+ (end 2.18 2.5)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "d46f8d22-a094-48cc-becd-9cd597185e25")+ )+ (fp_line+ (start 2.18 -2.5)+ (end -2.18 -2.5)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "d49ace31-8891-4e8b-9bf8-d6f465aae7bc")+ )+ (fp_line+ (start 2.18 2.5)+ (end 2.18 -2.5)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "ff20f603-35dd-4696-a8fd-ddeda392e2e6")+ )+ (fp_line+ (start -1.5 2.25)+ (end -1.5 -1.5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "4e81b245-ef99-4c4d-9aa9-92b727e61891")+ )+ (fp_line+ (start -1.5 2.25)+ (end 1.5 2.25)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "b0d86a67-6cb2-436e-bffe-f81b567e9196")+ )+ (fp_line+ (start -0.75 -2.25)+ (end -1.5 -1.5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "ff4f6cc9-7b1e-4b11-ba71-c76bc684191a")+ )+ (fp_line+ (start 1.5 -2.25)+ (end -0.75 -2.25)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "eae6bfba-f0f1-4993-821e-ca4cb383d9f0")+ )+ (fp_line+ (start 1.5 2.25)+ (end 1.5 -2.25)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "59d72e48-c101-437f-a4ef-087261754801")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 90)+ (layer "F.Fab")+ (uuid "ff1c736b-dd77-4508-bd61-ebc949cc5f4c")+ (effects+ (font+ (size 0.8 0.8)+ (thickness 0.12)+ )+ )+ )+ (pad "" smd rect+ (at -0.4125 -1.59375)+ (size 0.66 0.85)+ (layers "F.Paste")+ (uuid "240a28b9-de7d-4267-92f6-07d96791a177")+ )+ (pad "" smd rect+ (at -0.4125 -0.53125)+ (size 0.66 0.85)+ (layers "F.Paste")+ (uuid "6cc1e780-333c-49c0-87fe-cbbf21a5de21")+ )+ (pad "" smd rect+ (at -0.4125 0.53125)+ (size 0.66 0.85)+ (layers "F.Paste")+ (uuid "b0fd6ce4-3445-4352-be76-e9d3b7f06966")+ )+ (pad "" smd rect+ (at -0.4125 1.59375)+ (size 0.66 0.85)+ (layers "F.Paste")+ (uuid "c312b679-77c0-40a2-a83d-16c505bf6ba2")+ )+ (pad "" smd rect+ (at 0.4125 -1.59375)+ (size 0.66 0.85)+ (layers "F.Paste")+ (uuid "679839ed-7246-4996-a28a-c800cd170bd9")+ )+ (pad "" smd rect+ (at 0.4125 -0.53125)+ (size 0.66 0.85)+ (layers "F.Paste")+ (uuid "5b94ad88-e654-40ad-9d79-68ef864d05f2")+ )+ (pad "" smd rect+ (at 0.4125 0.53125)+ (size 0.66 0.85)+ (layers "F.Paste")+ (uuid "736e9fac-dd3d-41fc-a590-ec3871c2db76")+ )+ (pad "" smd rect+ (at 0.4125 1.59375)+ (size 0.66 0.85)+ (layers "F.Paste")+ (uuid "2824330f-7443-4db8-a213-1c1ea188e17c")+ )+ (pad "1" smd oval+ (at -1.5 -1.95)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "ce6b1d1a-8ad7-4c70-a370-4a1bd9d1d803")+ )+ (pad "2" smd oval+ (at -1.5 -1.3)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "bdf7579c-42c4-41b4-a633-9cf2c9971fd5")+ )+ (pad "3" smd oval+ (at -1.5 -0.65)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "7d2bea35-d97c-4f62-a0c8-07af1080089d")+ )+ (pad "4" smd oval+ (at -1.5 0)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "c16aea96-90e2-46fb-a73d-6281de6b0300")+ )+ (pad "5" smd oval+ (at -1.5 0.65)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "cb54b562-5e58-4ab2-9416-edc8e07f8108")+ )+ (pad "6" smd oval+ (at -1.5 1.3)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "90b06ff8-45b6-4635-b342-c5c3e9163be4")+ )+ (pad "7" smd oval+ (at -1.5 1.95)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "e191e83f-fe23-4776-8852-781daa7f70c2")+ )+ (pad "8" smd oval+ (at 1.5 1.95)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "97fcd534-2eb8-4c72-a2eb-36932d749621")+ )+ (pad "9" smd oval+ (at 1.5 1.3)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "1e7bafad-52bf-4a15-9f9b-d2ddda1a890f")+ )+ (pad "10" smd oval+ (at 1.5 0.65)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "a1688550-5ac1-4322-b02e-d075b2923077")+ )+ (pad "11" smd oval+ (at 1.5 0)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "4c183a68-f0b2-48af-859c-225aac6932c9")+ )+ (pad "12" smd oval+ (at 1.5 -0.65)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "5a270177-477d-4c17-866e-80edbaf1dbf0")+ )+ (pad "13" smd oval+ (at 1.5 -1.3)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "d2dcb968-7bee-446c-b7bc-6f98ba477445")+ )+ (pad "14" smd oval+ (at 1.5 -1.95)+ (size 0.85 0.35)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "63e482b7-8b87-4341-aea8-870130cb52dd")+ )+ (pad "15" smd rect+ (at 0 0)+ (size 1.65 4.25)+ (layers "F.Cu" "F.Mask")+ (uuid "22f75e20-17ef-45a8-8b89-e7ebce6ad3ee")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/DFN-14-1EP_3x4.5mm_P0.65mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
sit1145aqtk.kicad_symadded+73@@ -0,0 +1,73 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "SIT1145AQTK" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 12.70 0) (effects (font (size 1.27 1.27))))+ (property "Value" "SIT1145AQTK" (at 0 -15.24 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "SIT1145AQTK_0_1"+ (rectangle (start -12.70 10.16) (end 12.70 -12.70)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "SIT1145AQTK_1_1"+ (pin input line (at -17.78 7.62 0) (length 5.08)+ (name "TXD" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 5.08 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 2.54 0) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 0.00 0) (length 5.08)+ (name "RXD" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "VIO" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -5.08 0) (length 5.08)+ (name "SDO" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -7.62 0) (length 5.08)+ (name "INH" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -10.16 0) (length 5.08)+ (name "SCK" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 7.62 180) (length 5.08)+ (name "EP" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 5.08 180) (length 5.08)+ (name "SCSN" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+ (name "CANH" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+ (name "CANL" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -2.54 180) (length 5.08)+ (name "SDI" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -5.08 180) (length 5.08)+ (name "BAT" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -7.62 180) (length 5.08)+ (name "WAKE" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
sit1145aqtk.lbradded+146@@ -0,0 +1,146 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm">+ <description>DFN-14-1EP, 3 x 4.5 mm, 0.65 mm pitch. 14-lead very thin plastic quad flat, 3.0x4.5mm size, 0.65mm pitch</description>+ <smd name="1" x="-1.5000" y="1.9500" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="2" x="-1.5000" y="1.3000" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="3" x="-1.5000" y="0.6500" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="4" x="-1.5000" y="-0.0000" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="5" x="-1.5000" y="-0.6500" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="6" x="-1.5000" y="-1.3000" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="7" x="-1.5000" y="-1.9500" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="8" x="1.5000" y="-1.9500" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="9" x="1.5000" y="-1.3000" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="10" x="1.5000" y="-0.6500" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="11" x="1.5000" y="-0.0000" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="12" x="1.5000" y="0.6500" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="13" x="1.5000" y="1.3000" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="14" x="1.5000" y="1.9500" dx="0.8500" dy="0.3500" layer="1" roundness="100"/>+ <smd name="15" x="0.0000" y="-0.0000" dx="1.6500" dy="4.2500" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.0700" y="2.2600"/>+ <vertex x="-2.5500" y="2.2600"/>+ <vertex x="-2.0700" y="2.7400"/>+ <vertex x="-2.0700" y="2.2600"/>+ </polygon>+ <wire x1="-1.5000" y1="-2.3600" x2="1.5000" y2="-2.3600" width="0.1200" layer="21"/>+ <wire x1="1.5000" y1="2.3600" x2="-1.5000" y2="2.3600" width="0.1200" layer="21"/>+ <wire x1="-1.5000" y1="-2.2500" x2="-1.5000" y2="1.5000" width="0.1000" layer="51"/>+ <wire x1="-1.5000" y1="-2.2500" x2="1.5000" y2="-2.2500" width="0.1000" layer="51"/>+ <wire x1="-0.7500" y1="2.2500" x2="-1.5000" y2="1.5000" width="0.1000" layer="51"/>+ <wire x1="1.5000" y1="2.2500" x2="-0.7500" y2="2.2500" width="0.1000" layer="51"/>+ <wire x1="1.5000" y1="-2.2500" x2="1.5000" y2="2.2500" width="0.1000" layer="51"/>+ <text x="0" y="2.975" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.975" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="SIT1145AQTK">+ <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>+ <wire x1="12.7" y1="10.16" x2="12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-12.7" x2="-12.7" y2="10.16" width="0.254" layer="94"/>+ <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-15.2400" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="TXD" x="-17.78" y="7.62" length="middle" direction="in"/>+ <pin name="GND" x="-17.78" y="5.08" length="middle" direction="pwr"/>+ <pin name="VCC" x="-17.78" y="2.54" length="middle" direction="pwr"/>+ <pin name="RXD" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="VIO" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="SDO" x="-17.78" y="-5.08" length="middle" direction="out"/>+ <pin name="INH" x="-17.78" y="-7.62" length="middle" direction="out"/>+ <pin name="SCK" x="-17.78" y="-10.16" length="middle" direction="in"/>+ <pin name="EP" x="17.78" y="7.62" length="middle" direction="pas" rot="R180"/>+ <pin name="SCSN" x="17.78" y="5.08" length="middle" direction="in" rot="R180"/>+ <pin name="CANH" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+ <pin name="CANL" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+ <pin name="SDI" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="BAT" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>+ <pin name="WAKE" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="SIT1145AQTK" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="SIT1145AQTK" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm">+ <connects>+ <connect gate="G$1" pin="TXD" pad="1"/>+ <connect gate="G$1" pin="GND" pad="2"/>+ <connect gate="G$1" pin="VCC" pad="3"/>+ <connect gate="G$1" pin="RXD" pad="4"/>+ <connect gate="G$1" pin="VIO" pad="5"/>+ <connect gate="G$1" pin="SDO" pad="6"/>+ <connect gate="G$1" pin="INH" pad="7"/>+ <connect gate="G$1" pin="SCK" pad="8"/>+ <connect gate="G$1" pin="EP" pad="15"/>+ <connect gate="G$1" pin="SCSN" pad="14"/>+ <connect gate="G$1" pin="CANH" pad="13"/>+ <connect gate="G$1" pin="CANL" pad="12"/>+ <connect gate="G$1" pin="SDI" pad="11"/>+ <connect gate="G$1" pin="BAT" pad="10"/>+ <connect gate="G$1" pin="WAKE" pad="9"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
sit1145aqtk.stepadded+3924@@ -0,0 +1,3924 @@+ISO-10303-21; +HEADER; +/* DFN-14-1EP_3x4.5mm_P0.65mm.step 3D STEP model for use in ECAD systems + * Copyright (C) 2018, kicad StepUp + * + * This work is licensed under the [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode), + * with the following exception: + * To the extent that the creation of electronic designs that use 'Licensed Material' can be considered to be 'Adapted Material', + * then the copyright holder waives article 3 of the license with respect to these designs and any generated files which use data provided + * as part of the 'Licensed Material'. + * You are free to use the library data in your own projects without the obligation to share your project files under this or any other license agreement. + * However, if you wish to redistribute these libraries, or parts thereof (including in modified form) as a collection then the exception above does not apply. + * Please refer to https://github.com/KiCad/kicad-packages3D/blob/master/LICENSE.md for further clarification of the exception. + * Disclaimer of Warranties and Limitation of Liability. + * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied. + * *USE 3D CAD DATA AT YOUR OWN RISK* + * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.* + * + */ + +FILE_DESCRIPTION( +/* description */ ('model of DFN-14-1EP_3x4.5mm_P0.65mm'), +/* implementation_level */ '2;1'); + +FILE_NAME( +/* name */ 'DFN-14-1EP_3x4.5mm_P0.65mm.step', +/* time_stamp */ '2018-11-02T17:59:10', +/* author */ ('kicad StepUp','ksu'), +/* organization */ ('FreeCAD'), +/* preprocessor_version */ 'OCC', +/* originating_system */ 'kicad StepUp', +/* authorisation */ ''); + +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; + +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', +'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( +'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('DFN_14_1EP_3x45mm_P065mm','DFN_14_1EP_3x45mm_P065mm','',( +#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#3157); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#65,#96,#120,#144,#168,#185,#680,#872,#896, +#936,#1121,#1145,#1185,#1218,#1242,#1275,#1315,#1339,#1379,#1412, +#1436,#1469,#1509,#1533,#1573,#1606,#1630,#1663,#1703,#1727,#1767, +#1800,#1824,#1857,#1897,#1921,#1961,#1994,#2018,#2051,#2091,#2115, +#2155,#2188,#2212,#2245,#2285,#2309,#2349,#2382,#2406,#2439,#2456, +#2479,#2496,#2513,#2530,#2547,#2564,#2581,#2598,#2615,#2627,#2644, +#2661,#2678,#2695,#2712,#2729,#2746,#2763,#2775,#2792,#2804,#2821, +#2833,#2850,#2862,#2879,#2891,#2908,#2920,#2937,#2949,#2966,#2978, +#2995,#3007,#3024,#3036,#3053,#3065,#3082,#3094,#3111,#3123,#3148)); +#17 = ADVANCED_FACE('',(#18),#60,.F.); +#18 = FACE_BOUND('',#19,.F.); +#19 = EDGE_LOOP('',(#20,#30,#38,#46,#54)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-0.825,1.925,0.E+000)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-0.825,-2.125,0.E+000)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-0.825,1.925,0.E+000)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(0.825,-2.125,0.E+000)); +#34 = LINE('',#35,#36); +#35 = CARTESIAN_POINT('',(-0.825,-2.125,0.E+000)); +#36 = VECTOR('',#37,1.); +#37 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#38 = ORIENTED_EDGE('',*,*,#39,.T.); +#39 = EDGE_CURVE('',#32,#40,#42,.T.); +#40 = VERTEX_POINT('',#41); +#41 = CARTESIAN_POINT('',(0.825,2.125,0.E+000)); +#42 = LINE('',#43,#44); +#43 = CARTESIAN_POINT('',(0.825,-2.125,0.E+000)); +#44 = VECTOR('',#45,1.); +#45 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#46 = ORIENTED_EDGE('',*,*,#47,.T.); +#47 = EDGE_CURVE('',#40,#48,#50,.T.); +#48 = VERTEX_POINT('',#49); +#49 = CARTESIAN_POINT('',(-0.625,2.125,0.E+000)); +#50 = LINE('',#51,#52); +#51 = CARTESIAN_POINT('',(0.825,2.125,0.E+000)); +#52 = VECTOR('',#53,1.); +#53 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#54 = ORIENTED_EDGE('',*,*,#55,.T.); +#55 = EDGE_CURVE('',#48,#22,#56,.T.); +#56 = LINE('',#57,#58); +#57 = CARTESIAN_POINT('',(-0.625,2.125,0.E+000)); +#58 = VECTOR('',#59,1.); +#59 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#60 = PLANE('',#61); +#61 = AXIS2_PLACEMENT_3D('',#62,#63,#64); +#62 = CARTESIAN_POINT('',(8.982320145751E-003,-2.201891385255E-002, +0.E+000)); +#63 = DIRECTION('',(0.E+000,0.E+000,1.)); +#64 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#65 = ADVANCED_FACE('',(#66),#91,.F.); +#66 = FACE_BOUND('',#67,.F.); +#67 = EDGE_LOOP('',(#68,#69,#77,#85)); +#68 = ORIENTED_EDGE('',*,*,#21,.F.); +#69 = ORIENTED_EDGE('',*,*,#70,.T.); +#70 = EDGE_CURVE('',#22,#71,#73,.T.); +#71 = VERTEX_POINT('',#72); +#72 = CARTESIAN_POINT('',(-0.825,1.925,0.1)); +#73 = LINE('',#74,#75); +#74 = CARTESIAN_POINT('',(-0.825,1.925,0.E+000)); +#75 = VECTOR('',#76,1.); +#76 = DIRECTION('',(0.E+000,0.E+000,1.)); +#77 = ORIENTED_EDGE('',*,*,#78,.F.); +#78 = EDGE_CURVE('',#79,#71,#81,.T.); +#79 = VERTEX_POINT('',#80); +#80 = CARTESIAN_POINT('',(-0.825,-2.125,0.1)); +#81 = LINE('',#82,#83); +#82 = CARTESIAN_POINT('',(-0.825,2.0625,0.1)); +#83 = VECTOR('',#84,1.); +#84 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#85 = ORIENTED_EDGE('',*,*,#86,.F.); +#86 = EDGE_CURVE('',#24,#79,#87,.T.); +#87 = LINE('',#88,#89); +#88 = CARTESIAN_POINT('',(-0.825,-2.125,0.E+000)); +#89 = VECTOR('',#90,1.); +#90 = DIRECTION('',(0.E+000,0.E+000,1.)); +#91 = PLANE('',#92); +#92 = AXIS2_PLACEMENT_3D('',#93,#94,#95); +#93 = CARTESIAN_POINT('',(-0.825,1.925,0.E+000)); +#94 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#95 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#96 = ADVANCED_FACE('',(#97),#115,.F.); +#97 = FACE_BOUND('',#98,.F.); +#98 = EDGE_LOOP('',(#99,#100,#101,#109)); +#99 = ORIENTED_EDGE('',*,*,#31,.F.); +#100 = ORIENTED_EDGE('',*,*,#86,.T.); +#101 = ORIENTED_EDGE('',*,*,#102,.F.); +#102 = EDGE_CURVE('',#103,#79,#105,.T.); +#103 = VERTEX_POINT('',#104); +#104 = CARTESIAN_POINT('',(0.825,-2.125,0.1)); +#105 = LINE('',#106,#107); +#106 = CARTESIAN_POINT('',(-1.1375,-2.125,0.1)); +#107 = VECTOR('',#108,1.); +#108 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#109 = ORIENTED_EDGE('',*,*,#110,.F.); +#110 = EDGE_CURVE('',#32,#103,#111,.T.); +#111 = LINE('',#112,#113); +#112 = CARTESIAN_POINT('',(0.825,-2.125,0.E+000)); +#113 = VECTOR('',#114,1.); +#114 = DIRECTION('',(0.E+000,0.E+000,1.)); +#115 = PLANE('',#116); +#116 = AXIS2_PLACEMENT_3D('',#117,#118,#119); +#117 = CARTESIAN_POINT('',(-0.825,-2.125,0.E+000)); +#118 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#119 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#120 = ADVANCED_FACE('',(#121),#139,.F.); +#121 = FACE_BOUND('',#122,.F.); +#122 = EDGE_LOOP('',(#123,#124,#125,#133)); +#123 = ORIENTED_EDGE('',*,*,#39,.F.); +#124 = ORIENTED_EDGE('',*,*,#110,.T.); +#125 = ORIENTED_EDGE('',*,*,#126,.F.); +#126 = EDGE_CURVE('',#127,#103,#129,.T.); +#127 = VERTEX_POINT('',#128); +#128 = CARTESIAN_POINT('',(0.825,2.125,0.1)); +#129 = LINE('',#130,#131); +#130 = CARTESIAN_POINT('',(0.825,3.75E-002,0.1)); +#131 = VECTOR('',#132,1.); +#132 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#133 = ORIENTED_EDGE('',*,*,#134,.F.); +#134 = EDGE_CURVE('',#40,#127,#135,.T.); +#135 = LINE('',#136,#137); +#136 = CARTESIAN_POINT('',(0.825,2.125,0.E+000)); +#137 = VECTOR('',#138,1.); +#138 = DIRECTION('',(0.E+000,0.E+000,1.)); +#139 = PLANE('',#140); +#140 = AXIS2_PLACEMENT_3D('',#141,#142,#143); +#141 = CARTESIAN_POINT('',(0.825,-2.125,0.E+000)); +#142 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#143 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#144 = ADVANCED_FACE('',(#145),#163,.F.); +#145 = FACE_BOUND('',#146,.F.); +#146 = EDGE_LOOP('',(#147,#148,#149,#157)); +#147 = ORIENTED_EDGE('',*,*,#47,.F.); +#148 = ORIENTED_EDGE('',*,*,#134,.T.); +#149 = ORIENTED_EDGE('',*,*,#150,.F.); +#150 = EDGE_CURVE('',#151,#127,#153,.T.); +#151 = VERTEX_POINT('',#152); +#152 = CARTESIAN_POINT('',(-0.625,2.125,0.1)); +#153 = LINE('',#154,#155); +#154 = CARTESIAN_POINT('',(-0.3125,2.125,0.1)); +#155 = VECTOR('',#156,1.); +#156 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#157 = ORIENTED_EDGE('',*,*,#158,.F.); +#158 = EDGE_CURVE('',#48,#151,#159,.T.); +#159 = LINE('',#160,#161); +#160 = CARTESIAN_POINT('',(-0.625,2.125,0.E+000)); +#161 = VECTOR('',#162,1.); +#162 = DIRECTION('',(0.E+000,0.E+000,1.)); +#163 = PLANE('',#164); +#164 = AXIS2_PLACEMENT_3D('',#165,#166,#167); +#165 = CARTESIAN_POINT('',(0.825,2.125,0.E+000)); +#166 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#167 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#168 = ADVANCED_FACE('',(#169),#180,.F.); +#169 = FACE_BOUND('',#170,.F.); +#170 = EDGE_LOOP('',(#171,#172,#173,#179)); +#171 = ORIENTED_EDGE('',*,*,#55,.F.); +#172 = ORIENTED_EDGE('',*,*,#158,.T.); +#173 = ORIENTED_EDGE('',*,*,#174,.F.); +#174 = EDGE_CURVE('',#71,#151,#175,.T.); +#175 = LINE('',#176,#177); +#176 = CARTESIAN_POINT('',(-0.8125,1.9375,0.1)); +#177 = VECTOR('',#178,1.); +#178 = DIRECTION('',(0.707106781187,0.707106781187,0.E+000)); +#179 = ORIENTED_EDGE('',*,*,#70,.F.); +#180 = PLANE('',#181); +#181 = AXIS2_PLACEMENT_3D('',#182,#183,#184); +#182 = CARTESIAN_POINT('',(-0.625,2.125,0.E+000)); +#183 = DIRECTION('',(0.707106781187,-0.707106781187,0.E+000)); +#184 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#185 = ADVANCED_FACE('',(#186,#668),#675,.F.); +#186 = FACE_BOUND('',#187,.F.); +#187 = EDGE_LOOP('',(#188,#198,#206,#214,#222,#230,#238,#246,#254,#262, +#270,#278,#286,#294,#302,#310,#318,#326,#334,#342,#350,#358,#366, +#374,#382,#390,#398,#406,#414,#422,#430,#438,#446,#454,#462,#470, +#478,#486,#494,#502,#510,#518,#526,#534,#542,#550,#558,#566,#574, +#582,#590,#598,#606,#614,#622,#630,#638,#646,#654,#662)); +#188 = ORIENTED_EDGE('',*,*,#189,.F.); +#189 = EDGE_CURVE('',#190,#192,#194,.T.); +#190 = VERTEX_POINT('',#191); +#191 = CARTESIAN_POINT('',(1.45,2.2,0.1)); +#192 = VERTEX_POINT('',#193); +#193 = CARTESIAN_POINT('',(1.45,2.07,0.1)); +#194 = LINE('',#195,#196); +#195 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#196 = VECTOR('',#197,1.); +#197 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#198 = ORIENTED_EDGE('',*,*,#199,.F.); +#199 = EDGE_CURVE('',#200,#190,#202,.T.); +#200 = VERTEX_POINT('',#201); +#201 = CARTESIAN_POINT('',(-1.45,2.2,0.1)); +#202 = LINE('',#203,#204); +#203 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#204 = VECTOR('',#205,1.); +#205 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#206 = ORIENTED_EDGE('',*,*,#207,.T.); +#207 = EDGE_CURVE('',#200,#208,#210,.T.); +#208 = VERTEX_POINT('',#209); +#209 = CARTESIAN_POINT('',(-1.45,2.07,0.1)); +#210 = LINE('',#211,#212); +#211 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#212 = VECTOR('',#213,1.); +#213 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#214 = ORIENTED_EDGE('',*,*,#215,.T.); +#215 = EDGE_CURVE('',#208,#216,#218,.T.); +#216 = VERTEX_POINT('',#217); +#217 = CARTESIAN_POINT('',(-1.25,2.07,0.1)); +#218 = LINE('',#219,#220); +#219 = CARTESIAN_POINT('',(-1.35,2.07,0.1)); +#220 = VECTOR('',#221,1.); +#221 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#222 = ORIENTED_EDGE('',*,*,#223,.T.); +#223 = EDGE_CURVE('',#216,#224,#226,.T.); +#224 = VERTEX_POINT('',#225); +#225 = CARTESIAN_POINT('',(-1.25,1.83,0.1)); +#226 = LINE('',#227,#228); +#227 = CARTESIAN_POINT('',(-1.25,2.015,0.1)); +#228 = VECTOR('',#229,1.); +#229 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#230 = ORIENTED_EDGE('',*,*,#231,.T.); +#231 = EDGE_CURVE('',#224,#232,#234,.T.); +#232 = VERTEX_POINT('',#233); +#233 = CARTESIAN_POINT('',(-1.45,1.83,0.1)); +#234 = LINE('',#235,#236); +#235 = CARTESIAN_POINT('',(-1.475,1.83,0.1)); +#236 = VECTOR('',#237,1.); +#237 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#238 = ORIENTED_EDGE('',*,*,#239,.T.); +#239 = EDGE_CURVE('',#232,#240,#242,.T.); +#240 = VERTEX_POINT('',#241); +#241 = CARTESIAN_POINT('',(-1.45,1.42,0.1)); +#242 = LINE('',#243,#244); +#243 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#244 = VECTOR('',#245,1.); +#245 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#246 = ORIENTED_EDGE('',*,*,#247,.T.); +#247 = EDGE_CURVE('',#240,#248,#250,.T.); +#248 = VERTEX_POINT('',#249); +#249 = CARTESIAN_POINT('',(-1.25,1.42,0.1)); +#250 = LINE('',#251,#252); +#251 = CARTESIAN_POINT('',(-1.35,1.42,0.1)); +#252 = VECTOR('',#253,1.); +#253 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#254 = ORIENTED_EDGE('',*,*,#255,.T.); +#255 = EDGE_CURVE('',#248,#256,#258,.T.); +#256 = VERTEX_POINT('',#257); +#257 = CARTESIAN_POINT('',(-1.25,1.18,0.1)); +#258 = LINE('',#259,#260); +#259 = CARTESIAN_POINT('',(-1.25,1.69,0.1)); +#260 = VECTOR('',#261,1.); +#261 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#262 = ORIENTED_EDGE('',*,*,#263,.T.); +#263 = EDGE_CURVE('',#256,#264,#266,.T.); +#264 = VERTEX_POINT('',#265); +#265 = CARTESIAN_POINT('',(-1.45,1.18,0.1)); +#266 = LINE('',#267,#268); +#267 = CARTESIAN_POINT('',(-1.475,1.18,0.1)); +#268 = VECTOR('',#269,1.); +#269 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#270 = ORIENTED_EDGE('',*,*,#271,.T.); +#271 = EDGE_CURVE('',#264,#272,#274,.T.); +#272 = VERTEX_POINT('',#273); +#273 = CARTESIAN_POINT('',(-1.45,0.77,0.1)); +#274 = LINE('',#275,#276); +#275 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#276 = VECTOR('',#277,1.); +#277 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#278 = ORIENTED_EDGE('',*,*,#279,.T.); +#279 = EDGE_CURVE('',#272,#280,#282,.T.); +#280 = VERTEX_POINT('',#281); +#281 = CARTESIAN_POINT('',(-1.25,0.77,0.1)); +#282 = LINE('',#283,#284); +#283 = CARTESIAN_POINT('',(-1.35,0.77,0.1)); +#284 = VECTOR('',#285,1.); +#285 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#286 = ORIENTED_EDGE('',*,*,#287,.T.); +#287 = EDGE_CURVE('',#280,#288,#290,.T.); +#288 = VERTEX_POINT('',#289); +#289 = CARTESIAN_POINT('',(-1.25,0.53,0.1)); +#290 = LINE('',#291,#292); +#291 = CARTESIAN_POINT('',(-1.25,1.365,0.1)); +#292 = VECTOR('',#293,1.); +#293 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#294 = ORIENTED_EDGE('',*,*,#295,.T.); +#295 = EDGE_CURVE('',#288,#296,#298,.T.); +#296 = VERTEX_POINT('',#297); +#297 = CARTESIAN_POINT('',(-1.45,0.53,0.1)); +#298 = LINE('',#299,#300); +#299 = CARTESIAN_POINT('',(-1.475,0.53,0.1)); +#300 = VECTOR('',#301,1.); +#301 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#302 = ORIENTED_EDGE('',*,*,#303,.T.); +#303 = EDGE_CURVE('',#296,#304,#306,.T.); +#304 = VERTEX_POINT('',#305); +#305 = CARTESIAN_POINT('',(-1.45,0.12,0.1)); +#306 = LINE('',#307,#308); +#307 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#308 = VECTOR('',#309,1.); +#309 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#310 = ORIENTED_EDGE('',*,*,#311,.T.); +#311 = EDGE_CURVE('',#304,#312,#314,.T.); +#312 = VERTEX_POINT('',#313); +#313 = CARTESIAN_POINT('',(-1.25,0.12,0.1)); +#314 = LINE('',#315,#316); +#315 = CARTESIAN_POINT('',(-1.35,0.12,0.1)); +#316 = VECTOR('',#317,1.); +#317 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#318 = ORIENTED_EDGE('',*,*,#319,.T.); +#319 = EDGE_CURVE('',#312,#320,#322,.T.); +#320 = VERTEX_POINT('',#321); +#321 = CARTESIAN_POINT('',(-1.25,-0.12,0.1)); +#322 = LINE('',#323,#324); +#323 = CARTESIAN_POINT('',(-1.25,1.04,0.1)); +#324 = VECTOR('',#325,1.); +#325 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#326 = ORIENTED_EDGE('',*,*,#327,.T.); +#327 = EDGE_CURVE('',#320,#328,#330,.T.); +#328 = VERTEX_POINT('',#329); +#329 = CARTESIAN_POINT('',(-1.45,-0.12,0.1)); +#330 = LINE('',#331,#332); +#331 = CARTESIAN_POINT('',(-1.475,-0.12,0.1)); +#332 = VECTOR('',#333,1.); +#333 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#334 = ORIENTED_EDGE('',*,*,#335,.T.); +#335 = EDGE_CURVE('',#328,#336,#338,.T.); +#336 = VERTEX_POINT('',#337); +#337 = CARTESIAN_POINT('',(-1.45,-0.53,0.1)); +#338 = LINE('',#339,#340); +#339 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#340 = VECTOR('',#341,1.); +#341 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#342 = ORIENTED_EDGE('',*,*,#343,.T.); +#343 = EDGE_CURVE('',#336,#344,#346,.T.); +#344 = VERTEX_POINT('',#345); +#345 = CARTESIAN_POINT('',(-1.25,-0.53,0.1)); +#346 = LINE('',#347,#348); +#347 = CARTESIAN_POINT('',(-1.35,-0.53,0.1)); +#348 = VECTOR('',#349,1.); +#349 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#350 = ORIENTED_EDGE('',*,*,#351,.T.); +#351 = EDGE_CURVE('',#344,#352,#354,.T.); +#352 = VERTEX_POINT('',#353); +#353 = CARTESIAN_POINT('',(-1.25,-0.77,0.1)); +#354 = LINE('',#355,#356); +#355 = CARTESIAN_POINT('',(-1.25,0.715,0.1)); +#356 = VECTOR('',#357,1.); +#357 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#358 = ORIENTED_EDGE('',*,*,#359,.T.); +#359 = EDGE_CURVE('',#352,#360,#362,.T.); +#360 = VERTEX_POINT('',#361); +#361 = CARTESIAN_POINT('',(-1.45,-0.77,0.1)); +#362 = LINE('',#363,#364); +#363 = CARTESIAN_POINT('',(-1.475,-0.77,0.1)); +#364 = VECTOR('',#365,1.); +#365 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#366 = ORIENTED_EDGE('',*,*,#367,.T.); +#367 = EDGE_CURVE('',#360,#368,#370,.T.); +#368 = VERTEX_POINT('',#369); +#369 = CARTESIAN_POINT('',(-1.45,-1.18,0.1)); +#370 = LINE('',#371,#372); +#371 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#372 = VECTOR('',#373,1.); +#373 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#374 = ORIENTED_EDGE('',*,*,#375,.T.); +#375 = EDGE_CURVE('',#368,#376,#378,.T.); +#376 = VERTEX_POINT('',#377); +#377 = CARTESIAN_POINT('',(-1.25,-1.18,0.1)); +#378 = LINE('',#379,#380); +#379 = CARTESIAN_POINT('',(-1.35,-1.18,0.1)); +#380 = VECTOR('',#381,1.); +#381 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#382 = ORIENTED_EDGE('',*,*,#383,.T.); +#383 = EDGE_CURVE('',#376,#384,#386,.T.); +#384 = VERTEX_POINT('',#385); +#385 = CARTESIAN_POINT('',(-1.25,-1.42,0.1)); +#386 = LINE('',#387,#388); +#387 = CARTESIAN_POINT('',(-1.25,0.39,0.1)); +#388 = VECTOR('',#389,1.); +#389 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#390 = ORIENTED_EDGE('',*,*,#391,.T.); +#391 = EDGE_CURVE('',#384,#392,#394,.T.); +#392 = VERTEX_POINT('',#393); +#393 = CARTESIAN_POINT('',(-1.45,-1.42,0.1)); +#394 = LINE('',#395,#396); +#395 = CARTESIAN_POINT('',(-1.475,-1.42,0.1)); +#396 = VECTOR('',#397,1.); +#397 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#398 = ORIENTED_EDGE('',*,*,#399,.T.); +#399 = EDGE_CURVE('',#392,#400,#402,.T.); +#400 = VERTEX_POINT('',#401); +#401 = CARTESIAN_POINT('',(-1.45,-1.83,0.1)); +#402 = LINE('',#403,#404); +#403 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#404 = VECTOR('',#405,1.); +#405 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#406 = ORIENTED_EDGE('',*,*,#407,.T.); +#407 = EDGE_CURVE('',#400,#408,#410,.T.); +#408 = VERTEX_POINT('',#409); +#409 = CARTESIAN_POINT('',(-1.25,-1.83,0.1)); +#410 = LINE('',#411,#412); +#411 = CARTESIAN_POINT('',(-1.35,-1.83,0.1)); +#412 = VECTOR('',#413,1.); +#413 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#414 = ORIENTED_EDGE('',*,*,#415,.T.); +#415 = EDGE_CURVE('',#408,#416,#418,.T.); +#416 = VERTEX_POINT('',#417); +#417 = CARTESIAN_POINT('',(-1.25,-2.07,0.1)); +#418 = LINE('',#419,#420); +#419 = CARTESIAN_POINT('',(-1.25,6.5E-002,0.1)); +#420 = VECTOR('',#421,1.); +#421 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#422 = ORIENTED_EDGE('',*,*,#423,.T.); +#423 = EDGE_CURVE('',#416,#424,#426,.T.); +#424 = VERTEX_POINT('',#425); +#425 = CARTESIAN_POINT('',(-1.45,-2.07,0.1)); +#426 = LINE('',#427,#428); +#427 = CARTESIAN_POINT('',(-1.475,-2.07,0.1)); +#428 = VECTOR('',#429,1.); +#429 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#430 = ORIENTED_EDGE('',*,*,#431,.T.); +#431 = EDGE_CURVE('',#424,#432,#434,.T.); +#432 = VERTEX_POINT('',#433); +#433 = CARTESIAN_POINT('',(-1.45,-2.2,0.1)); +#434 = LINE('',#435,#436); +#435 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#436 = VECTOR('',#437,1.); +#437 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#438 = ORIENTED_EDGE('',*,*,#439,.T.); +#439 = EDGE_CURVE('',#432,#440,#442,.T.); +#440 = VERTEX_POINT('',#441); +#441 = CARTESIAN_POINT('',(1.45,-2.2,0.1)); +#442 = LINE('',#443,#444); +#443 = CARTESIAN_POINT('',(-1.45,-2.2,1.E-001)); +#444 = VECTOR('',#445,1.); +#445 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#446 = ORIENTED_EDGE('',*,*,#447,.F.); +#447 = EDGE_CURVE('',#448,#440,#450,.T.); +#448 = VERTEX_POINT('',#449); +#449 = CARTESIAN_POINT('',(1.45,-2.07,0.1)); +#450 = LINE('',#451,#452); +#451 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#452 = VECTOR('',#453,1.); +#453 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#454 = ORIENTED_EDGE('',*,*,#455,.T.); +#455 = EDGE_CURVE('',#448,#456,#458,.T.); +#456 = VERTEX_POINT('',#457); +#457 = CARTESIAN_POINT('',(1.25,-2.07,0.1)); +#458 = LINE('',#459,#460); +#459 = CARTESIAN_POINT('',(-0.1,-2.07,0.1)); +#460 = VECTOR('',#461,1.); +#461 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#462 = ORIENTED_EDGE('',*,*,#463,.T.); +#463 = EDGE_CURVE('',#456,#464,#466,.T.); +#464 = VERTEX_POINT('',#465); +#465 = CARTESIAN_POINT('',(1.25,-1.83,0.1)); +#466 = LINE('',#467,#468); +#467 = CARTESIAN_POINT('',(1.25,0.185,0.1)); +#468 = VECTOR('',#469,1.); +#469 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#470 = ORIENTED_EDGE('',*,*,#471,.T.); +#471 = EDGE_CURVE('',#464,#472,#474,.T.); +#472 = VERTEX_POINT('',#473); +#473 = CARTESIAN_POINT('',(1.45,-1.83,0.1)); +#474 = LINE('',#475,#476); +#475 = CARTESIAN_POINT('',(2.5E-002,-1.83,0.1)); +#476 = VECTOR('',#477,1.); +#477 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#478 = ORIENTED_EDGE('',*,*,#479,.F.); +#479 = EDGE_CURVE('',#480,#472,#482,.T.); +#480 = VERTEX_POINT('',#481); +#481 = CARTESIAN_POINT('',(1.45,-1.42,0.1)); +#482 = LINE('',#483,#484); +#483 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#484 = VECTOR('',#485,1.); +#485 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#486 = ORIENTED_EDGE('',*,*,#487,.T.); +#487 = EDGE_CURVE('',#480,#488,#490,.T.); +#488 = VERTEX_POINT('',#489); +#489 = CARTESIAN_POINT('',(1.25,-1.42,0.1)); +#490 = LINE('',#491,#492); +#491 = CARTESIAN_POINT('',(-0.1,-1.42,0.1)); +#492 = VECTOR('',#493,1.); +#493 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#494 = ORIENTED_EDGE('',*,*,#495,.T.); +#495 = EDGE_CURVE('',#488,#496,#498,.T.); +#496 = VERTEX_POINT('',#497); +#497 = CARTESIAN_POINT('',(1.25,-1.18,0.1)); +#498 = LINE('',#499,#500); +#499 = CARTESIAN_POINT('',(1.25,0.51,0.1)); +#500 = VECTOR('',#501,1.); +#501 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#502 = ORIENTED_EDGE('',*,*,#503,.T.); +#503 = EDGE_CURVE('',#496,#504,#506,.T.); +#504 = VERTEX_POINT('',#505); +#505 = CARTESIAN_POINT('',(1.45,-1.18,0.1)); +#506 = LINE('',#507,#508); +#507 = CARTESIAN_POINT('',(2.5E-002,-1.18,0.1)); +#508 = VECTOR('',#509,1.); +#509 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#510 = ORIENTED_EDGE('',*,*,#511,.F.); +#511 = EDGE_CURVE('',#512,#504,#514,.T.); +#512 = VERTEX_POINT('',#513); +#513 = CARTESIAN_POINT('',(1.45,-0.77,0.1)); +#514 = LINE('',#515,#516); +#515 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#516 = VECTOR('',#517,1.); +#517 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#518 = ORIENTED_EDGE('',*,*,#519,.T.); +#519 = EDGE_CURVE('',#512,#520,#522,.T.); +#520 = VERTEX_POINT('',#521); +#521 = CARTESIAN_POINT('',(1.25,-0.77,0.1)); +#522 = LINE('',#523,#524); +#523 = CARTESIAN_POINT('',(-0.1,-0.77,0.1)); +#524 = VECTOR('',#525,1.); +#525 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#526 = ORIENTED_EDGE('',*,*,#527,.T.); +#527 = EDGE_CURVE('',#520,#528,#530,.T.); +#528 = VERTEX_POINT('',#529); +#529 = CARTESIAN_POINT('',(1.25,-0.53,0.1)); +#530 = LINE('',#531,#532); +#531 = CARTESIAN_POINT('',(1.25,0.835,0.1)); +#532 = VECTOR('',#533,1.); +#533 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#534 = ORIENTED_EDGE('',*,*,#535,.T.); +#535 = EDGE_CURVE('',#528,#536,#538,.T.); +#536 = VERTEX_POINT('',#537); +#537 = CARTESIAN_POINT('',(1.45,-0.53,0.1)); +#538 = LINE('',#539,#540); +#539 = CARTESIAN_POINT('',(2.5E-002,-0.53,0.1)); +#540 = VECTOR('',#541,1.); +#541 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#542 = ORIENTED_EDGE('',*,*,#543,.F.); +#543 = EDGE_CURVE('',#544,#536,#546,.T.); +#544 = VERTEX_POINT('',#545); +#545 = CARTESIAN_POINT('',(1.45,-0.12,0.1)); +#546 = LINE('',#547,#548); +#547 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#548 = VECTOR('',#549,1.); +#549 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#550 = ORIENTED_EDGE('',*,*,#551,.T.); +#551 = EDGE_CURVE('',#544,#552,#554,.T.); +#552 = VERTEX_POINT('',#553); +#553 = CARTESIAN_POINT('',(1.25,-0.12,0.1)); +#554 = LINE('',#555,#556); +#555 = CARTESIAN_POINT('',(-0.1,-0.12,0.1)); +#556 = VECTOR('',#557,1.); +#557 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#558 = ORIENTED_EDGE('',*,*,#559,.T.); +#559 = EDGE_CURVE('',#552,#560,#562,.T.); +#560 = VERTEX_POINT('',#561); +#561 = CARTESIAN_POINT('',(1.25,0.12,0.1)); +#562 = LINE('',#563,#564); +#563 = CARTESIAN_POINT('',(1.25,1.16,0.1)); +#564 = VECTOR('',#565,1.); +#565 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#566 = ORIENTED_EDGE('',*,*,#567,.T.); +#567 = EDGE_CURVE('',#560,#568,#570,.T.); +#568 = VERTEX_POINT('',#569); +#569 = CARTESIAN_POINT('',(1.45,0.12,0.1)); +#570 = LINE('',#571,#572); +#571 = CARTESIAN_POINT('',(2.5E-002,0.12,0.1)); +#572 = VECTOR('',#573,1.); +#573 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#574 = ORIENTED_EDGE('',*,*,#575,.F.); +#575 = EDGE_CURVE('',#576,#568,#578,.T.); +#576 = VERTEX_POINT('',#577); +#577 = CARTESIAN_POINT('',(1.45,0.53,0.1)); +#578 = LINE('',#579,#580); +#579 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#580 = VECTOR('',#581,1.); +#581 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#582 = ORIENTED_EDGE('',*,*,#583,.T.); +#583 = EDGE_CURVE('',#576,#584,#586,.T.); +#584 = VERTEX_POINT('',#585); +#585 = CARTESIAN_POINT('',(1.25,0.53,0.1)); +#586 = LINE('',#587,#588); +#587 = CARTESIAN_POINT('',(-0.1,0.53,0.1)); +#588 = VECTOR('',#589,1.); +#589 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#590 = ORIENTED_EDGE('',*,*,#591,.T.); +#591 = EDGE_CURVE('',#584,#592,#594,.T.); +#592 = VERTEX_POINT('',#593); +#593 = CARTESIAN_POINT('',(1.25,0.77,0.1)); +#594 = LINE('',#595,#596); +#595 = CARTESIAN_POINT('',(1.25,1.485,0.1)); +#596 = VECTOR('',#597,1.); +#597 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#598 = ORIENTED_EDGE('',*,*,#599,.T.); +#599 = EDGE_CURVE('',#592,#600,#602,.T.); +#600 = VERTEX_POINT('',#601); +#601 = CARTESIAN_POINT('',(1.45,0.77,0.1)); +#602 = LINE('',#603,#604); +#603 = CARTESIAN_POINT('',(2.5E-002,0.77,0.1)); +#604 = VECTOR('',#605,1.); +#605 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#606 = ORIENTED_EDGE('',*,*,#607,.F.); +#607 = EDGE_CURVE('',#608,#600,#610,.T.); +#608 = VERTEX_POINT('',#609); +#609 = CARTESIAN_POINT('',(1.45,1.18,0.1)); +#610 = LINE('',#611,#612); +#611 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#612 = VECTOR('',#613,1.); +#613 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#614 = ORIENTED_EDGE('',*,*,#615,.T.); +#615 = EDGE_CURVE('',#608,#616,#618,.T.); +#616 = VERTEX_POINT('',#617); +#617 = CARTESIAN_POINT('',(1.25,1.18,0.1)); +#618 = LINE('',#619,#620); +#619 = CARTESIAN_POINT('',(-1.E-001,1.18,0.1)); +#620 = VECTOR('',#621,1.); +#621 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#622 = ORIENTED_EDGE('',*,*,#623,.T.); +#623 = EDGE_CURVE('',#616,#624,#626,.T.); +#624 = VERTEX_POINT('',#625); +#625 = CARTESIAN_POINT('',(1.25,1.42,0.1)); +#626 = LINE('',#627,#628); +#627 = CARTESIAN_POINT('',(1.25,1.81,0.1)); +#628 = VECTOR('',#629,1.); +#629 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#630 = ORIENTED_EDGE('',*,*,#631,.T.); +#631 = EDGE_CURVE('',#624,#632,#634,.T.); +#632 = VERTEX_POINT('',#633); +#633 = CARTESIAN_POINT('',(1.45,1.42,0.1)); +#634 = LINE('',#635,#636); +#635 = CARTESIAN_POINT('',(2.5E-002,1.42,0.1)); +#636 = VECTOR('',#637,1.); +#637 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#638 = ORIENTED_EDGE('',*,*,#639,.F.); +#639 = EDGE_CURVE('',#640,#632,#642,.T.); +#640 = VERTEX_POINT('',#641); +#641 = CARTESIAN_POINT('',(1.45,1.83,0.1)); +#642 = LINE('',#643,#644); +#643 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#644 = VECTOR('',#645,1.); +#645 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#646 = ORIENTED_EDGE('',*,*,#647,.T.); +#647 = EDGE_CURVE('',#640,#648,#650,.T.); +#648 = VERTEX_POINT('',#649); +#649 = CARTESIAN_POINT('',(1.25,1.83,0.1)); +#650 = LINE('',#651,#652); +#651 = CARTESIAN_POINT('',(-1.E-001,1.83,0.1)); +#652 = VECTOR('',#653,1.); +#653 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#654 = ORIENTED_EDGE('',*,*,#655,.T.); +#655 = EDGE_CURVE('',#648,#656,#658,.T.); +#656 = VERTEX_POINT('',#657); +#657 = CARTESIAN_POINT('',(1.25,2.07,0.1)); +#658 = LINE('',#659,#660); +#659 = CARTESIAN_POINT('',(1.25,2.135,0.1)); +#660 = VECTOR('',#661,1.); +#661 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#662 = ORIENTED_EDGE('',*,*,#663,.T.); +#663 = EDGE_CURVE('',#656,#192,#664,.T.); +#664 = LINE('',#665,#666); +#665 = CARTESIAN_POINT('',(2.5E-002,2.07,0.1)); +#666 = VECTOR('',#667,1.); +#667 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#668 = FACE_BOUND('',#669,.F.); +#669 = EDGE_LOOP('',(#670,#671,#672,#673,#674)); +#670 = ORIENTED_EDGE('',*,*,#78,.T.); +#671 = ORIENTED_EDGE('',*,*,#174,.T.); +#672 = ORIENTED_EDGE('',*,*,#150,.T.); +#673 = ORIENTED_EDGE('',*,*,#126,.T.); +#674 = ORIENTED_EDGE('',*,*,#102,.T.); +#675 = PLANE('',#676); +#676 = AXIS2_PLACEMENT_3D('',#677,#678,#679); +#677 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#678 = DIRECTION('',(0.E+000,0.E+000,1.)); +#679 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#680 = ADVANCED_FACE('',(#681),#867,.T.); +#681 = FACE_BOUND('',#682,.T.); +#682 = EDGE_LOOP('',(#683,#684,#692,#700,#706,#707,#715,#723,#729,#730, +#738,#746,#752,#753,#761,#769,#775,#776,#784,#792,#798,#799,#807, +#815,#821,#822,#830,#838,#844,#845,#853,#861)); +#683 = ORIENTED_EDGE('',*,*,#189,.F.); +#684 = ORIENTED_EDGE('',*,*,#685,.T.); +#685 = EDGE_CURVE('',#190,#686,#688,.T.); +#686 = VERTEX_POINT('',#687); +#687 = CARTESIAN_POINT('',(1.45,2.2,0.6)); +#688 = LINE('',#689,#690); +#689 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#690 = VECTOR('',#691,1.); +#691 = DIRECTION('',(0.E+000,0.E+000,1.)); +#692 = ORIENTED_EDGE('',*,*,#693,.T.); +#693 = EDGE_CURVE('',#686,#694,#696,.T.); +#694 = VERTEX_POINT('',#695); +#695 = CARTESIAN_POINT('',(1.45,-2.2,0.6)); +#696 = LINE('',#697,#698); +#697 = CARTESIAN_POINT('',(1.45,2.2,0.6)); +#698 = VECTOR('',#699,1.); +#699 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#700 = ORIENTED_EDGE('',*,*,#701,.F.); +#701 = EDGE_CURVE('',#440,#694,#702,.T.); +#702 = LINE('',#703,#704); +#703 = CARTESIAN_POINT('',(1.45,-2.2,1.E-001)); +#704 = VECTOR('',#705,1.); +#705 = DIRECTION('',(0.E+000,0.E+000,1.)); +#706 = ORIENTED_EDGE('',*,*,#447,.F.); +#707 = ORIENTED_EDGE('',*,*,#708,.T.); +#708 = EDGE_CURVE('',#448,#709,#711,.T.); +#709 = VERTEX_POINT('',#710); +#710 = CARTESIAN_POINT('',(1.45,-2.07,0.2)); +#711 = LINE('',#712,#713); +#712 = CARTESIAN_POINT('',(1.45,-2.07,5.E-002)); +#713 = VECTOR('',#714,1.); +#714 = DIRECTION('',(0.E+000,0.E+000,1.)); +#715 = ORIENTED_EDGE('',*,*,#716,.F.); +#716 = EDGE_CURVE('',#717,#709,#719,.T.); +#717 = VERTEX_POINT('',#718); +#718 = CARTESIAN_POINT('',(1.45,-1.83,0.2)); +#719 = LINE('',#720,#721); +#720 = CARTESIAN_POINT('',(1.45,0.125,0.2)); +#721 = VECTOR('',#722,1.); +#722 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#723 = ORIENTED_EDGE('',*,*,#724,.T.); +#724 = EDGE_CURVE('',#717,#472,#725,.T.); +#725 = LINE('',#726,#727); +#726 = CARTESIAN_POINT('',(1.45,-1.83,5.E-002)); +#727 = VECTOR('',#728,1.); +#728 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#729 = ORIENTED_EDGE('',*,*,#479,.F.); +#730 = ORIENTED_EDGE('',*,*,#731,.T.); +#731 = EDGE_CURVE('',#480,#732,#734,.T.); +#732 = VERTEX_POINT('',#733); +#733 = CARTESIAN_POINT('',(1.45,-1.42,0.2)); +#734 = LINE('',#735,#736); +#735 = CARTESIAN_POINT('',(1.45,-1.42,5.E-002)); +#736 = VECTOR('',#737,1.); +#737 = DIRECTION('',(0.E+000,0.E+000,1.)); +#738 = ORIENTED_EDGE('',*,*,#739,.F.); +#739 = EDGE_CURVE('',#740,#732,#742,.T.); +#740 = VERTEX_POINT('',#741); +#741 = CARTESIAN_POINT('',(1.45,-1.18,0.2)); +#742 = LINE('',#743,#744); +#743 = CARTESIAN_POINT('',(1.45,0.45,0.2)); +#744 = VECTOR('',#745,1.); +#745 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#746 = ORIENTED_EDGE('',*,*,#747,.T.); +#747 = EDGE_CURVE('',#740,#504,#748,.T.); +#748 = LINE('',#749,#750); +#749 = CARTESIAN_POINT('',(1.45,-1.18,5.E-002)); +#750 = VECTOR('',#751,1.); +#751 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#752 = ORIENTED_EDGE('',*,*,#511,.F.); +#753 = ORIENTED_EDGE('',*,*,#754,.T.); +#754 = EDGE_CURVE('',#512,#755,#757,.T.); +#755 = VERTEX_POINT('',#756); +#756 = CARTESIAN_POINT('',(1.45,-0.77,0.2)); +#757 = LINE('',#758,#759); +#758 = CARTESIAN_POINT('',(1.45,-0.77,5.E-002)); +#759 = VECTOR('',#760,1.); +#760 = DIRECTION('',(0.E+000,0.E+000,1.)); +#761 = ORIENTED_EDGE('',*,*,#762,.F.); +#762 = EDGE_CURVE('',#763,#755,#765,.T.); +#763 = VERTEX_POINT('',#764); +#764 = CARTESIAN_POINT('',(1.45,-0.53,0.2)); +#765 = LINE('',#766,#767); +#766 = CARTESIAN_POINT('',(1.45,0.775,0.2)); +#767 = VECTOR('',#768,1.); +#768 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#769 = ORIENTED_EDGE('',*,*,#770,.T.); +#770 = EDGE_CURVE('',#763,#536,#771,.T.); +#771 = LINE('',#772,#773); +#772 = CARTESIAN_POINT('',(1.45,-0.53,5.E-002)); +#773 = VECTOR('',#774,1.); +#774 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#775 = ORIENTED_EDGE('',*,*,#543,.F.); +#776 = ORIENTED_EDGE('',*,*,#777,.T.); +#777 = EDGE_CURVE('',#544,#778,#780,.T.); +#778 = VERTEX_POINT('',#779); +#779 = CARTESIAN_POINT('',(1.45,-0.12,0.2)); +#780 = LINE('',#781,#782); +#781 = CARTESIAN_POINT('',(1.45,-0.12,5.E-002)); +#782 = VECTOR('',#783,1.); +#783 = DIRECTION('',(0.E+000,0.E+000,1.)); +#784 = ORIENTED_EDGE('',*,*,#785,.F.); +#785 = EDGE_CURVE('',#786,#778,#788,.T.); +#786 = VERTEX_POINT('',#787); +#787 = CARTESIAN_POINT('',(1.45,0.12,0.2)); +#788 = LINE('',#789,#790); +#789 = CARTESIAN_POINT('',(1.45,1.1,0.2)); +#790 = VECTOR('',#791,1.); +#791 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#792 = ORIENTED_EDGE('',*,*,#793,.T.); +#793 = EDGE_CURVE('',#786,#568,#794,.T.); +#794 = LINE('',#795,#796); +#795 = CARTESIAN_POINT('',(1.45,0.12,5.E-002)); +#796 = VECTOR('',#797,1.); +#797 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#798 = ORIENTED_EDGE('',*,*,#575,.F.); +#799 = ORIENTED_EDGE('',*,*,#800,.T.); +#800 = EDGE_CURVE('',#576,#801,#803,.T.); +#801 = VERTEX_POINT('',#802); +#802 = CARTESIAN_POINT('',(1.45,0.53,0.2)); +#803 = LINE('',#804,#805); +#804 = CARTESIAN_POINT('',(1.45,0.53,5.E-002)); +#805 = VECTOR('',#806,1.); +#806 = DIRECTION('',(0.E+000,0.E+000,1.)); +#807 = ORIENTED_EDGE('',*,*,#808,.F.); +#808 = EDGE_CURVE('',#809,#801,#811,.T.); +#809 = VERTEX_POINT('',#810); +#810 = CARTESIAN_POINT('',(1.45,0.77,0.2)); +#811 = LINE('',#812,#813); +#812 = CARTESIAN_POINT('',(1.45,1.425,0.2)); +#813 = VECTOR('',#814,1.); +#814 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#815 = ORIENTED_EDGE('',*,*,#816,.T.); +#816 = EDGE_CURVE('',#809,#600,#817,.T.); +#817 = LINE('',#818,#819); +#818 = CARTESIAN_POINT('',(1.45,0.77,5.E-002)); +#819 = VECTOR('',#820,1.); +#820 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#821 = ORIENTED_EDGE('',*,*,#607,.F.); +#822 = ORIENTED_EDGE('',*,*,#823,.T.); +#823 = EDGE_CURVE('',#608,#824,#826,.T.); +#824 = VERTEX_POINT('',#825); +#825 = CARTESIAN_POINT('',(1.45,1.18,0.2)); +#826 = LINE('',#827,#828); +#827 = CARTESIAN_POINT('',(1.45,1.18,5.E-002)); +#828 = VECTOR('',#829,1.); +#829 = DIRECTION('',(0.E+000,0.E+000,1.)); +#830 = ORIENTED_EDGE('',*,*,#831,.F.); +#831 = EDGE_CURVE('',#832,#824,#834,.T.); +#832 = VERTEX_POINT('',#833); +#833 = CARTESIAN_POINT('',(1.45,1.42,0.2)); +#834 = LINE('',#835,#836); +#835 = CARTESIAN_POINT('',(1.45,1.75,0.2)); +#836 = VECTOR('',#837,1.); +#837 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#838 = ORIENTED_EDGE('',*,*,#839,.T.); +#839 = EDGE_CURVE('',#832,#632,#840,.T.); +#840 = LINE('',#841,#842); +#841 = CARTESIAN_POINT('',(1.45,1.42,5.E-002)); +#842 = VECTOR('',#843,1.); +#843 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#844 = ORIENTED_EDGE('',*,*,#639,.F.); +#845 = ORIENTED_EDGE('',*,*,#846,.T.); +#846 = EDGE_CURVE('',#640,#847,#849,.T.); +#847 = VERTEX_POINT('',#848); +#848 = CARTESIAN_POINT('',(1.45,1.83,0.2)); +#849 = LINE('',#850,#851); +#850 = CARTESIAN_POINT('',(1.45,1.83,5.E-002)); +#851 = VECTOR('',#852,1.); +#852 = DIRECTION('',(0.E+000,0.E+000,1.)); +#853 = ORIENTED_EDGE('',*,*,#854,.F.); +#854 = EDGE_CURVE('',#855,#847,#857,.T.); +#855 = VERTEX_POINT('',#856); +#856 = CARTESIAN_POINT('',(1.45,2.07,0.2)); +#857 = LINE('',#858,#859); +#858 = CARTESIAN_POINT('',(1.45,2.075,0.2)); +#859 = VECTOR('',#860,1.); +#860 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#861 = ORIENTED_EDGE('',*,*,#862,.T.); +#862 = EDGE_CURVE('',#855,#192,#863,.T.); +#863 = LINE('',#864,#865); +#864 = CARTESIAN_POINT('',(1.45,2.07,5.E-002)); +#865 = VECTOR('',#866,1.); +#866 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#867 = PLANE('',#868); +#868 = AXIS2_PLACEMENT_3D('',#869,#870,#871); +#869 = CARTESIAN_POINT('',(1.45,2.2,1.E-001)); +#870 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#871 = DIRECTION('',(0.E+000,0.E+000,1.)); +#872 = ADVANCED_FACE('',(#873),#891,.F.); +#873 = FACE_BOUND('',#874,.F.); +#874 = EDGE_LOOP('',(#875,#883,#884,#885)); +#875 = ORIENTED_EDGE('',*,*,#876,.F.); +#876 = EDGE_CURVE('',#200,#877,#879,.T.); +#877 = VERTEX_POINT('',#878); +#878 = CARTESIAN_POINT('',(-1.45,2.2,0.6)); +#879 = LINE('',#880,#881); +#880 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#881 = VECTOR('',#882,1.); +#882 = DIRECTION('',(0.E+000,0.E+000,1.)); +#883 = ORIENTED_EDGE('',*,*,#199,.T.); +#884 = ORIENTED_EDGE('',*,*,#685,.T.); +#885 = ORIENTED_EDGE('',*,*,#886,.F.); +#886 = EDGE_CURVE('',#877,#686,#887,.T.); +#887 = LINE('',#888,#889); +#888 = CARTESIAN_POINT('',(-1.45,2.2,0.6)); +#889 = VECTOR('',#890,1.); +#890 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#891 = PLANE('',#892); +#892 = AXIS2_PLACEMENT_3D('',#893,#894,#895); +#893 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#894 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#895 = DIRECTION('',(0.E+000,0.E+000,1.)); +#896 = ADVANCED_FACE('',(#897),#931,.F.); +#897 = FACE_BOUND('',#898,.F.); +#898 = EDGE_LOOP('',(#899,#909,#917,#923,#924,#925)); +#899 = ORIENTED_EDGE('',*,*,#900,.F.); +#900 = EDGE_CURVE('',#901,#903,#905,.T.); +#901 = VERTEX_POINT('',#902); +#902 = CARTESIAN_POINT('',(1.5,2.07,0.E+000)); +#903 = VERTEX_POINT('',#904); +#904 = CARTESIAN_POINT('',(1.25,2.07,0.E+000)); +#905 = LINE('',#906,#907); +#906 = CARTESIAN_POINT('',(1.5,2.07,0.E+000)); +#907 = VECTOR('',#908,1.); +#908 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#909 = ORIENTED_EDGE('',*,*,#910,.T.); +#910 = EDGE_CURVE('',#901,#911,#913,.T.); +#911 = VERTEX_POINT('',#912); +#912 = CARTESIAN_POINT('',(1.5,2.07,0.2)); +#913 = LINE('',#914,#915); +#914 = CARTESIAN_POINT('',(1.5,2.07,0.E+000)); +#915 = VECTOR('',#916,1.); +#916 = DIRECTION('',(0.E+000,0.E+000,1.)); +#917 = ORIENTED_EDGE('',*,*,#918,.T.); +#918 = EDGE_CURVE('',#911,#855,#919,.T.); +#919 = LINE('',#920,#921); +#920 = CARTESIAN_POINT('',(1.5,2.07,0.2)); +#921 = VECTOR('',#922,1.); +#922 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#923 = ORIENTED_EDGE('',*,*,#862,.T.); +#924 = ORIENTED_EDGE('',*,*,#663,.F.); +#925 = ORIENTED_EDGE('',*,*,#926,.F.); +#926 = EDGE_CURVE('',#903,#656,#927,.T.); +#927 = LINE('',#928,#929); +#928 = CARTESIAN_POINT('',(1.25,2.07,0.E+000)); +#929 = VECTOR('',#930,1.); +#930 = DIRECTION('',(0.E+000,0.E+000,1.)); +#931 = PLANE('',#932); +#932 = AXIS2_PLACEMENT_3D('',#933,#934,#935); +#933 = CARTESIAN_POINT('',(1.5,2.07,0.E+000)); +#934 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#935 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#936 = ADVANCED_FACE('',(#937),#1116,.F.); +#937 = FACE_BOUND('',#938,.F.); +#938 = EDGE_LOOP('',(#939,#940,#941,#949,#955,#956,#964,#972,#978,#979, +#987,#995,#1001,#1002,#1010,#1018,#1024,#1025,#1033,#1041,#1047, +#1048,#1056,#1064,#1070,#1071,#1079,#1087,#1093,#1094,#1102,#1110)); +#939 = ORIENTED_EDGE('',*,*,#207,.F.); +#940 = ORIENTED_EDGE('',*,*,#876,.T.); +#941 = ORIENTED_EDGE('',*,*,#942,.T.); +#942 = EDGE_CURVE('',#877,#943,#945,.T.); +#943 = VERTEX_POINT('',#944); +#944 = CARTESIAN_POINT('',(-1.45,-2.2,0.6)); +#945 = LINE('',#946,#947); +#946 = CARTESIAN_POINT('',(-1.45,2.2,0.6)); +#947 = VECTOR('',#948,1.); +#948 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#949 = ORIENTED_EDGE('',*,*,#950,.F.); +#950 = EDGE_CURVE('',#432,#943,#951,.T.); +#951 = LINE('',#952,#953); +#952 = CARTESIAN_POINT('',(-1.45,-2.2,1.E-001)); +#953 = VECTOR('',#954,1.); +#954 = DIRECTION('',(0.E+000,0.E+000,1.)); +#955 = ORIENTED_EDGE('',*,*,#431,.F.); +#956 = ORIENTED_EDGE('',*,*,#957,.T.); +#957 = EDGE_CURVE('',#424,#958,#960,.T.); +#958 = VERTEX_POINT('',#959); +#959 = CARTESIAN_POINT('',(-1.45,-2.07,0.2)); +#960 = LINE('',#961,#962); +#961 = CARTESIAN_POINT('',(-1.45,-2.07,5.E-002)); +#962 = VECTOR('',#963,1.); +#963 = DIRECTION('',(0.E+000,0.E+000,1.)); +#964 = ORIENTED_EDGE('',*,*,#965,.F.); +#965 = EDGE_CURVE('',#966,#958,#968,.T.); +#966 = VERTEX_POINT('',#967); +#967 = CARTESIAN_POINT('',(-1.45,-1.83,0.2)); +#968 = LINE('',#969,#970); +#969 = CARTESIAN_POINT('',(-1.45,0.125,0.2)); +#970 = VECTOR('',#971,1.); +#971 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#972 = ORIENTED_EDGE('',*,*,#973,.T.); +#973 = EDGE_CURVE('',#966,#400,#974,.T.); +#974 = LINE('',#975,#976); +#975 = CARTESIAN_POINT('',(-1.45,-1.83,5.E-002)); +#976 = VECTOR('',#977,1.); +#977 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#978 = ORIENTED_EDGE('',*,*,#399,.F.); +#979 = ORIENTED_EDGE('',*,*,#980,.T.); +#980 = EDGE_CURVE('',#392,#981,#983,.T.); +#981 = VERTEX_POINT('',#982); +#982 = CARTESIAN_POINT('',(-1.45,-1.42,0.2)); +#983 = LINE('',#984,#985); +#984 = CARTESIAN_POINT('',(-1.45,-1.42,5.E-002)); +#985 = VECTOR('',#986,1.); +#986 = DIRECTION('',(0.E+000,0.E+000,1.)); +#987 = ORIENTED_EDGE('',*,*,#988,.F.); +#988 = EDGE_CURVE('',#989,#981,#991,.T.); +#989 = VERTEX_POINT('',#990); +#990 = CARTESIAN_POINT('',(-1.45,-1.18,0.2)); +#991 = LINE('',#992,#993); +#992 = CARTESIAN_POINT('',(-1.45,0.45,0.2)); +#993 = VECTOR('',#994,1.); +#994 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#995 = ORIENTED_EDGE('',*,*,#996,.T.); +#996 = EDGE_CURVE('',#989,#368,#997,.T.); +#997 = LINE('',#998,#999); +#998 = CARTESIAN_POINT('',(-1.45,-1.18,5.E-002)); +#999 = VECTOR('',#1000,1.); +#1000 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1001 = ORIENTED_EDGE('',*,*,#367,.F.); +#1002 = ORIENTED_EDGE('',*,*,#1003,.T.); +#1003 = EDGE_CURVE('',#360,#1004,#1006,.T.); +#1004 = VERTEX_POINT('',#1005); +#1005 = CARTESIAN_POINT('',(-1.45,-0.77,0.2)); +#1006 = LINE('',#1007,#1008); +#1007 = CARTESIAN_POINT('',(-1.45,-0.77,5.E-002)); +#1008 = VECTOR('',#1009,1.); +#1009 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1010 = ORIENTED_EDGE('',*,*,#1011,.F.); +#1011 = EDGE_CURVE('',#1012,#1004,#1014,.T.); +#1012 = VERTEX_POINT('',#1013); +#1013 = CARTESIAN_POINT('',(-1.45,-0.53,0.2)); +#1014 = LINE('',#1015,#1016); +#1015 = CARTESIAN_POINT('',(-1.45,0.775,0.2)); +#1016 = VECTOR('',#1017,1.); +#1017 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1018 = ORIENTED_EDGE('',*,*,#1019,.T.); +#1019 = EDGE_CURVE('',#1012,#336,#1020,.T.); +#1020 = LINE('',#1021,#1022); +#1021 = CARTESIAN_POINT('',(-1.45,-0.53,5.E-002)); +#1022 = VECTOR('',#1023,1.); +#1023 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1024 = ORIENTED_EDGE('',*,*,#335,.F.); +#1025 = ORIENTED_EDGE('',*,*,#1026,.T.); +#1026 = EDGE_CURVE('',#328,#1027,#1029,.T.); +#1027 = VERTEX_POINT('',#1028); +#1028 = CARTESIAN_POINT('',(-1.45,-0.12,0.2)); +#1029 = LINE('',#1030,#1031); +#1030 = CARTESIAN_POINT('',(-1.45,-0.12,5.E-002)); +#1031 = VECTOR('',#1032,1.); +#1032 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1033 = ORIENTED_EDGE('',*,*,#1034,.F.); +#1034 = EDGE_CURVE('',#1035,#1027,#1037,.T.); +#1035 = VERTEX_POINT('',#1036); +#1036 = CARTESIAN_POINT('',(-1.45,0.12,0.2)); +#1037 = LINE('',#1038,#1039); +#1038 = CARTESIAN_POINT('',(-1.45,1.1,0.2)); +#1039 = VECTOR('',#1040,1.); +#1040 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1041 = ORIENTED_EDGE('',*,*,#1042,.T.); +#1042 = EDGE_CURVE('',#1035,#304,#1043,.T.); +#1043 = LINE('',#1044,#1045); +#1044 = CARTESIAN_POINT('',(-1.45,0.12,5.E-002)); +#1045 = VECTOR('',#1046,1.); +#1046 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1047 = ORIENTED_EDGE('',*,*,#303,.F.); +#1048 = ORIENTED_EDGE('',*,*,#1049,.T.); +#1049 = EDGE_CURVE('',#296,#1050,#1052,.T.); +#1050 = VERTEX_POINT('',#1051); +#1051 = CARTESIAN_POINT('',(-1.45,0.53,0.2)); +#1052 = LINE('',#1053,#1054); +#1053 = CARTESIAN_POINT('',(-1.45,0.53,5.E-002)); +#1054 = VECTOR('',#1055,1.); +#1055 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1056 = ORIENTED_EDGE('',*,*,#1057,.F.); +#1057 = EDGE_CURVE('',#1058,#1050,#1060,.T.); +#1058 = VERTEX_POINT('',#1059); +#1059 = CARTESIAN_POINT('',(-1.45,0.77,0.2)); +#1060 = LINE('',#1061,#1062); +#1061 = CARTESIAN_POINT('',(-1.45,1.425,0.2)); +#1062 = VECTOR('',#1063,1.); +#1063 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1064 = ORIENTED_EDGE('',*,*,#1065,.T.); +#1065 = EDGE_CURVE('',#1058,#272,#1066,.T.); +#1066 = LINE('',#1067,#1068); +#1067 = CARTESIAN_POINT('',(-1.45,0.77,5.E-002)); +#1068 = VECTOR('',#1069,1.); +#1069 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1070 = ORIENTED_EDGE('',*,*,#271,.F.); +#1071 = ORIENTED_EDGE('',*,*,#1072,.T.); +#1072 = EDGE_CURVE('',#264,#1073,#1075,.T.); +#1073 = VERTEX_POINT('',#1074); +#1074 = CARTESIAN_POINT('',(-1.45,1.18,0.2)); +#1075 = LINE('',#1076,#1077); +#1076 = CARTESIAN_POINT('',(-1.45,1.18,5.E-002)); +#1077 = VECTOR('',#1078,1.); +#1078 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1079 = ORIENTED_EDGE('',*,*,#1080,.F.); +#1080 = EDGE_CURVE('',#1081,#1073,#1083,.T.); +#1081 = VERTEX_POINT('',#1082); +#1082 = CARTESIAN_POINT('',(-1.45,1.42,0.2)); +#1083 = LINE('',#1084,#1085); +#1084 = CARTESIAN_POINT('',(-1.45,1.75,0.2)); +#1085 = VECTOR('',#1086,1.); +#1086 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1087 = ORIENTED_EDGE('',*,*,#1088,.T.); +#1088 = EDGE_CURVE('',#1081,#240,#1089,.T.); +#1089 = LINE('',#1090,#1091); +#1090 = CARTESIAN_POINT('',(-1.45,1.42,5.E-002)); +#1091 = VECTOR('',#1092,1.); +#1092 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1093 = ORIENTED_EDGE('',*,*,#239,.F.); +#1094 = ORIENTED_EDGE('',*,*,#1095,.T.); +#1095 = EDGE_CURVE('',#232,#1096,#1098,.T.); +#1096 = VERTEX_POINT('',#1097); +#1097 = CARTESIAN_POINT('',(-1.45,1.83,0.2)); +#1098 = LINE('',#1099,#1100); +#1099 = CARTESIAN_POINT('',(-1.45,1.83,5.E-002)); +#1100 = VECTOR('',#1101,1.); +#1101 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1102 = ORIENTED_EDGE('',*,*,#1103,.F.); +#1103 = EDGE_CURVE('',#1104,#1096,#1106,.T.); +#1104 = VERTEX_POINT('',#1105); +#1105 = CARTESIAN_POINT('',(-1.45,2.07,0.2)); +#1106 = LINE('',#1107,#1108); +#1107 = CARTESIAN_POINT('',(-1.45,2.075,0.2)); +#1108 = VECTOR('',#1109,1.); +#1109 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1110 = ORIENTED_EDGE('',*,*,#1111,.T.); +#1111 = EDGE_CURVE('',#1104,#208,#1112,.T.); +#1112 = LINE('',#1113,#1114); +#1113 = CARTESIAN_POINT('',(-1.45,2.07,5.E-002)); +#1114 = VECTOR('',#1115,1.); +#1115 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1116 = PLANE('',#1117); +#1117 = AXIS2_PLACEMENT_3D('',#1118,#1119,#1120); +#1118 = CARTESIAN_POINT('',(-1.45,2.2,1.E-001)); +#1119 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1120 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1121 = ADVANCED_FACE('',(#1122),#1140,.F.); +#1122 = FACE_BOUND('',#1123,.F.); +#1123 = EDGE_LOOP('',(#1124,#1132,#1133,#1134)); +#1124 = ORIENTED_EDGE('',*,*,#1125,.F.); +#1125 = EDGE_CURVE('',#903,#1126,#1128,.T.); +#1126 = VERTEX_POINT('',#1127); +#1127 = CARTESIAN_POINT('',(1.25,1.83,0.E+000)); +#1128 = LINE('',#1129,#1130); +#1129 = CARTESIAN_POINT('',(1.25,2.07,0.E+000)); +#1130 = VECTOR('',#1131,1.); +#1131 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1132 = ORIENTED_EDGE('',*,*,#926,.T.); +#1133 = ORIENTED_EDGE('',*,*,#655,.F.); +#1134 = ORIENTED_EDGE('',*,*,#1135,.F.); +#1135 = EDGE_CURVE('',#1126,#648,#1136,.T.); +#1136 = LINE('',#1137,#1138); +#1137 = CARTESIAN_POINT('',(1.25,1.83,0.E+000)); +#1138 = VECTOR('',#1139,1.); +#1139 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1140 = PLANE('',#1141); +#1141 = AXIS2_PLACEMENT_3D('',#1142,#1143,#1144); +#1142 = CARTESIAN_POINT('',(1.25,2.07,0.E+000)); +#1143 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1144 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1145 = ADVANCED_FACE('',(#1146),#1180,.F.); +#1146 = FACE_BOUND('',#1147,.F.); +#1147 = EDGE_LOOP('',(#1148,#1158,#1164,#1165,#1166,#1174)); +#1148 = ORIENTED_EDGE('',*,*,#1149,.F.); +#1149 = EDGE_CURVE('',#1150,#1152,#1154,.T.); +#1150 = VERTEX_POINT('',#1151); +#1151 = CARTESIAN_POINT('',(-1.25,2.07,0.E+000)); +#1152 = VERTEX_POINT('',#1153); +#1153 = CARTESIAN_POINT('',(-1.5,2.07,0.E+000)); +#1154 = LINE('',#1155,#1156); +#1155 = CARTESIAN_POINT('',(-1.25,2.07,0.E+000)); +#1156 = VECTOR('',#1157,1.); +#1157 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1158 = ORIENTED_EDGE('',*,*,#1159,.T.); +#1159 = EDGE_CURVE('',#1150,#216,#1160,.T.); +#1160 = LINE('',#1161,#1162); +#1161 = CARTESIAN_POINT('',(-1.25,2.07,0.E+000)); +#1162 = VECTOR('',#1163,1.); +#1163 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1164 = ORIENTED_EDGE('',*,*,#215,.F.); +#1165 = ORIENTED_EDGE('',*,*,#1111,.F.); +#1166 = ORIENTED_EDGE('',*,*,#1167,.T.); +#1167 = EDGE_CURVE('',#1104,#1168,#1170,.T.); +#1168 = VERTEX_POINT('',#1169); +#1169 = CARTESIAN_POINT('',(-1.5,2.07,0.2)); +#1170 = LINE('',#1171,#1172); +#1171 = CARTESIAN_POINT('',(-1.25,2.07,0.2)); +#1172 = VECTOR('',#1173,1.); +#1173 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1174 = ORIENTED_EDGE('',*,*,#1175,.F.); +#1175 = EDGE_CURVE('',#1152,#1168,#1176,.T.); +#1176 = LINE('',#1177,#1178); +#1177 = CARTESIAN_POINT('',(-1.5,2.07,0.E+000)); +#1178 = VECTOR('',#1179,1.); +#1179 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1180 = PLANE('',#1181); +#1181 = AXIS2_PLACEMENT_3D('',#1182,#1183,#1184); +#1182 = CARTESIAN_POINT('',(-1.25,2.07,0.E+000)); +#1183 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1184 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1185 = ADVANCED_FACE('',(#1186),#1213,.F.); +#1186 = FACE_BOUND('',#1187,.F.); +#1187 = EDGE_LOOP('',(#1188,#1196,#1197,#1198,#1199,#1207)); +#1188 = ORIENTED_EDGE('',*,*,#1189,.F.); +#1189 = EDGE_CURVE('',#1126,#1190,#1192,.T.); +#1190 = VERTEX_POINT('',#1191); +#1191 = CARTESIAN_POINT('',(1.5,1.83,0.E+000)); +#1192 = LINE('',#1193,#1194); +#1193 = CARTESIAN_POINT('',(1.25,1.83,0.E+000)); +#1194 = VECTOR('',#1195,1.); +#1195 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1196 = ORIENTED_EDGE('',*,*,#1135,.T.); +#1197 = ORIENTED_EDGE('',*,*,#647,.F.); +#1198 = ORIENTED_EDGE('',*,*,#846,.T.); +#1199 = ORIENTED_EDGE('',*,*,#1200,.T.); +#1200 = EDGE_CURVE('',#847,#1201,#1203,.T.); +#1201 = VERTEX_POINT('',#1202); +#1202 = CARTESIAN_POINT('',(1.5,1.83,0.2)); +#1203 = LINE('',#1204,#1205); +#1204 = CARTESIAN_POINT('',(1.25,1.83,0.2)); +#1205 = VECTOR('',#1206,1.); +#1206 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1207 = ORIENTED_EDGE('',*,*,#1208,.F.); +#1208 = EDGE_CURVE('',#1190,#1201,#1209,.T.); +#1209 = LINE('',#1210,#1211); +#1210 = CARTESIAN_POINT('',(1.5,1.83,0.E+000)); +#1211 = VECTOR('',#1212,1.); +#1212 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1213 = PLANE('',#1214); +#1214 = AXIS2_PLACEMENT_3D('',#1215,#1216,#1217); +#1215 = CARTESIAN_POINT('',(1.25,1.83,0.E+000)); +#1216 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1217 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1218 = ADVANCED_FACE('',(#1219),#1237,.F.); +#1219 = FACE_BOUND('',#1220,.F.); +#1220 = EDGE_LOOP('',(#1221,#1229,#1235,#1236)); +#1221 = ORIENTED_EDGE('',*,*,#1222,.F.); +#1222 = EDGE_CURVE('',#1223,#1150,#1225,.T.); +#1223 = VERTEX_POINT('',#1224); +#1224 = CARTESIAN_POINT('',(-1.25,1.83,0.E+000)); +#1225 = LINE('',#1226,#1227); +#1226 = CARTESIAN_POINT('',(-1.25,1.83,0.E+000)); +#1227 = VECTOR('',#1228,1.); +#1228 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1229 = ORIENTED_EDGE('',*,*,#1230,.T.); +#1230 = EDGE_CURVE('',#1223,#224,#1231,.T.); +#1231 = LINE('',#1232,#1233); +#1232 = CARTESIAN_POINT('',(-1.25,1.83,0.E+000)); +#1233 = VECTOR('',#1234,1.); +#1234 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1235 = ORIENTED_EDGE('',*,*,#223,.F.); +#1236 = ORIENTED_EDGE('',*,*,#1159,.F.); +#1237 = PLANE('',#1238); +#1238 = AXIS2_PLACEMENT_3D('',#1239,#1240,#1241); +#1239 = CARTESIAN_POINT('',(-1.25,1.83,0.E+000)); +#1240 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1241 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1242 = ADVANCED_FACE('',(#1243),#1270,.F.); +#1243 = FACE_BOUND('',#1244,.F.); +#1244 = EDGE_LOOP('',(#1245,#1253,#1261,#1267,#1268,#1269)); +#1245 = ORIENTED_EDGE('',*,*,#1246,.F.); +#1246 = EDGE_CURVE('',#1247,#1223,#1249,.T.); +#1247 = VERTEX_POINT('',#1248); +#1248 = CARTESIAN_POINT('',(-1.5,1.83,0.E+000)); +#1249 = LINE('',#1250,#1251); +#1250 = CARTESIAN_POINT('',(-1.5,1.83,0.E+000)); +#1251 = VECTOR('',#1252,1.); +#1252 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1253 = ORIENTED_EDGE('',*,*,#1254,.T.); +#1254 = EDGE_CURVE('',#1247,#1255,#1257,.T.); +#1255 = VERTEX_POINT('',#1256); +#1256 = CARTESIAN_POINT('',(-1.5,1.83,0.2)); +#1257 = LINE('',#1258,#1259); +#1258 = CARTESIAN_POINT('',(-1.5,1.83,0.E+000)); +#1259 = VECTOR('',#1260,1.); +#1260 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1261 = ORIENTED_EDGE('',*,*,#1262,.T.); +#1262 = EDGE_CURVE('',#1255,#1096,#1263,.T.); +#1263 = LINE('',#1264,#1265); +#1264 = CARTESIAN_POINT('',(-1.5,1.83,0.2)); +#1265 = VECTOR('',#1266,1.); +#1266 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1267 = ORIENTED_EDGE('',*,*,#1095,.F.); +#1268 = ORIENTED_EDGE('',*,*,#231,.F.); +#1269 = ORIENTED_EDGE('',*,*,#1230,.F.); +#1270 = PLANE('',#1271); +#1271 = AXIS2_PLACEMENT_3D('',#1272,#1273,#1274); +#1272 = CARTESIAN_POINT('',(-1.5,1.83,0.E+000)); +#1273 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1274 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1275 = ADVANCED_FACE('',(#1276),#1310,.F.); +#1276 = FACE_BOUND('',#1277,.F.); +#1277 = EDGE_LOOP('',(#1278,#1288,#1296,#1302,#1303,#1304)); +#1278 = ORIENTED_EDGE('',*,*,#1279,.F.); +#1279 = EDGE_CURVE('',#1280,#1282,#1284,.T.); +#1280 = VERTEX_POINT('',#1281); +#1281 = CARTESIAN_POINT('',(1.5,1.42,0.E+000)); +#1282 = VERTEX_POINT('',#1283); +#1283 = CARTESIAN_POINT('',(1.25,1.42,0.E+000)); +#1284 = LINE('',#1285,#1286); +#1285 = CARTESIAN_POINT('',(1.5,1.42,0.E+000)); +#1286 = VECTOR('',#1287,1.); +#1287 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1288 = ORIENTED_EDGE('',*,*,#1289,.T.); +#1289 = EDGE_CURVE('',#1280,#1290,#1292,.T.); +#1290 = VERTEX_POINT('',#1291); +#1291 = CARTESIAN_POINT('',(1.5,1.42,0.2)); +#1292 = LINE('',#1293,#1294); +#1293 = CARTESIAN_POINT('',(1.5,1.42,0.E+000)); +#1294 = VECTOR('',#1295,1.); +#1295 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1296 = ORIENTED_EDGE('',*,*,#1297,.T.); +#1297 = EDGE_CURVE('',#1290,#832,#1298,.T.); +#1298 = LINE('',#1299,#1300); +#1299 = CARTESIAN_POINT('',(1.5,1.42,0.2)); +#1300 = VECTOR('',#1301,1.); +#1301 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1302 = ORIENTED_EDGE('',*,*,#839,.T.); +#1303 = ORIENTED_EDGE('',*,*,#631,.F.); +#1304 = ORIENTED_EDGE('',*,*,#1305,.F.); +#1305 = EDGE_CURVE('',#1282,#624,#1306,.T.); +#1306 = LINE('',#1307,#1308); +#1307 = CARTESIAN_POINT('',(1.25,1.42,0.E+000)); +#1308 = VECTOR('',#1309,1.); +#1309 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1310 = PLANE('',#1311); +#1311 = AXIS2_PLACEMENT_3D('',#1312,#1313,#1314); +#1312 = CARTESIAN_POINT('',(1.5,1.42,0.E+000)); +#1313 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1314 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1315 = ADVANCED_FACE('',(#1316),#1334,.F.); +#1316 = FACE_BOUND('',#1317,.F.); +#1317 = EDGE_LOOP('',(#1318,#1326,#1327,#1328)); +#1318 = ORIENTED_EDGE('',*,*,#1319,.F.); +#1319 = EDGE_CURVE('',#1282,#1320,#1322,.T.); +#1320 = VERTEX_POINT('',#1321); +#1321 = CARTESIAN_POINT('',(1.25,1.18,0.E+000)); +#1322 = LINE('',#1323,#1324); +#1323 = CARTESIAN_POINT('',(1.25,1.42,0.E+000)); +#1324 = VECTOR('',#1325,1.); +#1325 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1326 = ORIENTED_EDGE('',*,*,#1305,.T.); +#1327 = ORIENTED_EDGE('',*,*,#623,.F.); +#1328 = ORIENTED_EDGE('',*,*,#1329,.F.); +#1329 = EDGE_CURVE('',#1320,#616,#1330,.T.); +#1330 = LINE('',#1331,#1332); +#1331 = CARTESIAN_POINT('',(1.25,1.18,0.E+000)); +#1332 = VECTOR('',#1333,1.); +#1333 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1334 = PLANE('',#1335); +#1335 = AXIS2_PLACEMENT_3D('',#1336,#1337,#1338); +#1336 = CARTESIAN_POINT('',(1.25,1.42,0.E+000)); +#1337 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1338 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1339 = ADVANCED_FACE('',(#1340),#1374,.F.); +#1340 = FACE_BOUND('',#1341,.F.); +#1341 = EDGE_LOOP('',(#1342,#1352,#1358,#1359,#1360,#1368)); +#1342 = ORIENTED_EDGE('',*,*,#1343,.F.); +#1343 = EDGE_CURVE('',#1344,#1346,#1348,.T.); +#1344 = VERTEX_POINT('',#1345); +#1345 = CARTESIAN_POINT('',(-1.25,1.42,0.E+000)); +#1346 = VERTEX_POINT('',#1347); +#1347 = CARTESIAN_POINT('',(-1.5,1.42,0.E+000)); +#1348 = LINE('',#1349,#1350); +#1349 = CARTESIAN_POINT('',(-1.25,1.42,0.E+000)); +#1350 = VECTOR('',#1351,1.); +#1351 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1352 = ORIENTED_EDGE('',*,*,#1353,.T.); +#1353 = EDGE_CURVE('',#1344,#248,#1354,.T.); +#1354 = LINE('',#1355,#1356); +#1355 = CARTESIAN_POINT('',(-1.25,1.42,0.E+000)); +#1356 = VECTOR('',#1357,1.); +#1357 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1358 = ORIENTED_EDGE('',*,*,#247,.F.); +#1359 = ORIENTED_EDGE('',*,*,#1088,.F.); +#1360 = ORIENTED_EDGE('',*,*,#1361,.T.); +#1361 = EDGE_CURVE('',#1081,#1362,#1364,.T.); +#1362 = VERTEX_POINT('',#1363); +#1363 = CARTESIAN_POINT('',(-1.5,1.42,0.2)); +#1364 = LINE('',#1365,#1366); +#1365 = CARTESIAN_POINT('',(-1.25,1.42,0.2)); +#1366 = VECTOR('',#1367,1.); +#1367 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1368 = ORIENTED_EDGE('',*,*,#1369,.F.); +#1369 = EDGE_CURVE('',#1346,#1362,#1370,.T.); +#1370 = LINE('',#1371,#1372); +#1371 = CARTESIAN_POINT('',(-1.5,1.42,0.E+000)); +#1372 = VECTOR('',#1373,1.); +#1373 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1374 = PLANE('',#1375); +#1375 = AXIS2_PLACEMENT_3D('',#1376,#1377,#1378); +#1376 = CARTESIAN_POINT('',(-1.25,1.42,0.E+000)); +#1377 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1378 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1379 = ADVANCED_FACE('',(#1380),#1407,.F.); +#1380 = FACE_BOUND('',#1381,.F.); +#1381 = EDGE_LOOP('',(#1382,#1390,#1391,#1392,#1393,#1401)); +#1382 = ORIENTED_EDGE('',*,*,#1383,.F.); +#1383 = EDGE_CURVE('',#1320,#1384,#1386,.T.); +#1384 = VERTEX_POINT('',#1385); +#1385 = CARTESIAN_POINT('',(1.5,1.18,0.E+000)); +#1386 = LINE('',#1387,#1388); +#1387 = CARTESIAN_POINT('',(1.25,1.18,0.E+000)); +#1388 = VECTOR('',#1389,1.); +#1389 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1390 = ORIENTED_EDGE('',*,*,#1329,.T.); +#1391 = ORIENTED_EDGE('',*,*,#615,.F.); +#1392 = ORIENTED_EDGE('',*,*,#823,.T.); +#1393 = ORIENTED_EDGE('',*,*,#1394,.T.); +#1394 = EDGE_CURVE('',#824,#1395,#1397,.T.); +#1395 = VERTEX_POINT('',#1396); +#1396 = CARTESIAN_POINT('',(1.5,1.18,0.2)); +#1397 = LINE('',#1398,#1399); +#1398 = CARTESIAN_POINT('',(1.25,1.18,0.2)); +#1399 = VECTOR('',#1400,1.); +#1400 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1401 = ORIENTED_EDGE('',*,*,#1402,.F.); +#1402 = EDGE_CURVE('',#1384,#1395,#1403,.T.); +#1403 = LINE('',#1404,#1405); +#1404 = CARTESIAN_POINT('',(1.5,1.18,0.E+000)); +#1405 = VECTOR('',#1406,1.); +#1406 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1407 = PLANE('',#1408); +#1408 = AXIS2_PLACEMENT_3D('',#1409,#1410,#1411); +#1409 = CARTESIAN_POINT('',(1.25,1.18,0.E+000)); +#1410 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1411 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1412 = ADVANCED_FACE('',(#1413),#1431,.F.); +#1413 = FACE_BOUND('',#1414,.F.); +#1414 = EDGE_LOOP('',(#1415,#1423,#1429,#1430)); +#1415 = ORIENTED_EDGE('',*,*,#1416,.F.); +#1416 = EDGE_CURVE('',#1417,#1344,#1419,.T.); +#1417 = VERTEX_POINT('',#1418); +#1418 = CARTESIAN_POINT('',(-1.25,1.18,0.E+000)); +#1419 = LINE('',#1420,#1421); +#1420 = CARTESIAN_POINT('',(-1.25,1.18,0.E+000)); +#1421 = VECTOR('',#1422,1.); +#1422 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1423 = ORIENTED_EDGE('',*,*,#1424,.T.); +#1424 = EDGE_CURVE('',#1417,#256,#1425,.T.); +#1425 = LINE('',#1426,#1427); +#1426 = CARTESIAN_POINT('',(-1.25,1.18,0.E+000)); +#1427 = VECTOR('',#1428,1.); +#1428 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1429 = ORIENTED_EDGE('',*,*,#255,.F.); +#1430 = ORIENTED_EDGE('',*,*,#1353,.F.); +#1431 = PLANE('',#1432); +#1432 = AXIS2_PLACEMENT_3D('',#1433,#1434,#1435); +#1433 = CARTESIAN_POINT('',(-1.25,1.18,0.E+000)); +#1434 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1435 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1436 = ADVANCED_FACE('',(#1437),#1464,.F.); +#1437 = FACE_BOUND('',#1438,.F.); +#1438 = EDGE_LOOP('',(#1439,#1447,#1455,#1461,#1462,#1463)); +#1439 = ORIENTED_EDGE('',*,*,#1440,.F.); +#1440 = EDGE_CURVE('',#1441,#1417,#1443,.T.); +#1441 = VERTEX_POINT('',#1442); +#1442 = CARTESIAN_POINT('',(-1.5,1.18,0.E+000)); +#1443 = LINE('',#1444,#1445); +#1444 = CARTESIAN_POINT('',(-1.5,1.18,0.E+000)); +#1445 = VECTOR('',#1446,1.); +#1446 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1447 = ORIENTED_EDGE('',*,*,#1448,.T.); +#1448 = EDGE_CURVE('',#1441,#1449,#1451,.T.); +#1449 = VERTEX_POINT('',#1450); +#1450 = CARTESIAN_POINT('',(-1.5,1.18,0.2)); +#1451 = LINE('',#1452,#1453); +#1452 = CARTESIAN_POINT('',(-1.5,1.18,0.E+000)); +#1453 = VECTOR('',#1454,1.); +#1454 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1455 = ORIENTED_EDGE('',*,*,#1456,.T.); +#1456 = EDGE_CURVE('',#1449,#1073,#1457,.T.); +#1457 = LINE('',#1458,#1459); +#1458 = CARTESIAN_POINT('',(-1.5,1.18,0.2)); +#1459 = VECTOR('',#1460,1.); +#1460 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1461 = ORIENTED_EDGE('',*,*,#1072,.F.); +#1462 = ORIENTED_EDGE('',*,*,#263,.F.); +#1463 = ORIENTED_EDGE('',*,*,#1424,.F.); +#1464 = PLANE('',#1465); +#1465 = AXIS2_PLACEMENT_3D('',#1466,#1467,#1468); +#1466 = CARTESIAN_POINT('',(-1.5,1.18,0.E+000)); +#1467 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1468 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1469 = ADVANCED_FACE('',(#1470),#1504,.F.); +#1470 = FACE_BOUND('',#1471,.F.); +#1471 = EDGE_LOOP('',(#1472,#1482,#1490,#1496,#1497,#1498)); +#1472 = ORIENTED_EDGE('',*,*,#1473,.F.); +#1473 = EDGE_CURVE('',#1474,#1476,#1478,.T.); +#1474 = VERTEX_POINT('',#1475); +#1475 = CARTESIAN_POINT('',(1.5,0.77,0.E+000)); +#1476 = VERTEX_POINT('',#1477); +#1477 = CARTESIAN_POINT('',(1.25,0.77,0.E+000)); +#1478 = LINE('',#1479,#1480); +#1479 = CARTESIAN_POINT('',(1.5,0.77,0.E+000)); +#1480 = VECTOR('',#1481,1.); +#1481 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1482 = ORIENTED_EDGE('',*,*,#1483,.T.); +#1483 = EDGE_CURVE('',#1474,#1484,#1486,.T.); +#1484 = VERTEX_POINT('',#1485); +#1485 = CARTESIAN_POINT('',(1.5,0.77,0.2)); +#1486 = LINE('',#1487,#1488); +#1487 = CARTESIAN_POINT('',(1.5,0.77,0.E+000)); +#1488 = VECTOR('',#1489,1.); +#1489 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1490 = ORIENTED_EDGE('',*,*,#1491,.T.); +#1491 = EDGE_CURVE('',#1484,#809,#1492,.T.); +#1492 = LINE('',#1493,#1494); +#1493 = CARTESIAN_POINT('',(1.5,0.77,0.2)); +#1494 = VECTOR('',#1495,1.); +#1495 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1496 = ORIENTED_EDGE('',*,*,#816,.T.); +#1497 = ORIENTED_EDGE('',*,*,#599,.F.); +#1498 = ORIENTED_EDGE('',*,*,#1499,.F.); +#1499 = EDGE_CURVE('',#1476,#592,#1500,.T.); +#1500 = LINE('',#1501,#1502); +#1501 = CARTESIAN_POINT('',(1.25,0.77,0.E+000)); +#1502 = VECTOR('',#1503,1.); +#1503 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1504 = PLANE('',#1505); +#1505 = AXIS2_PLACEMENT_3D('',#1506,#1507,#1508); +#1506 = CARTESIAN_POINT('',(1.5,0.77,0.E+000)); +#1507 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1508 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1509 = ADVANCED_FACE('',(#1510),#1528,.F.); +#1510 = FACE_BOUND('',#1511,.F.); +#1511 = EDGE_LOOP('',(#1512,#1520,#1521,#1522)); +#1512 = ORIENTED_EDGE('',*,*,#1513,.F.); +#1513 = EDGE_CURVE('',#1476,#1514,#1516,.T.); +#1514 = VERTEX_POINT('',#1515); +#1515 = CARTESIAN_POINT('',(1.25,0.53,0.E+000)); +#1516 = LINE('',#1517,#1518); +#1517 = CARTESIAN_POINT('',(1.25,0.77,0.E+000)); +#1518 = VECTOR('',#1519,1.); +#1519 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1520 = ORIENTED_EDGE('',*,*,#1499,.T.); +#1521 = ORIENTED_EDGE('',*,*,#591,.F.); +#1522 = ORIENTED_EDGE('',*,*,#1523,.F.); +#1523 = EDGE_CURVE('',#1514,#584,#1524,.T.); +#1524 = LINE('',#1525,#1526); +#1525 = CARTESIAN_POINT('',(1.25,0.53,0.E+000)); +#1526 = VECTOR('',#1527,1.); +#1527 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1528 = PLANE('',#1529); +#1529 = AXIS2_PLACEMENT_3D('',#1530,#1531,#1532); +#1530 = CARTESIAN_POINT('',(1.25,0.77,0.E+000)); +#1531 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1532 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1533 = ADVANCED_FACE('',(#1534),#1568,.F.); +#1534 = FACE_BOUND('',#1535,.F.); +#1535 = EDGE_LOOP('',(#1536,#1546,#1552,#1553,#1554,#1562)); +#1536 = ORIENTED_EDGE('',*,*,#1537,.F.); +#1537 = EDGE_CURVE('',#1538,#1540,#1542,.T.); +#1538 = VERTEX_POINT('',#1539); +#1539 = CARTESIAN_POINT('',(-1.25,0.77,0.E+000)); +#1540 = VERTEX_POINT('',#1541); +#1541 = CARTESIAN_POINT('',(-1.5,0.77,0.E+000)); +#1542 = LINE('',#1543,#1544); +#1543 = CARTESIAN_POINT('',(-1.25,0.77,0.E+000)); +#1544 = VECTOR('',#1545,1.); +#1545 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1546 = ORIENTED_EDGE('',*,*,#1547,.T.); +#1547 = EDGE_CURVE('',#1538,#280,#1548,.T.); +#1548 = LINE('',#1549,#1550); +#1549 = CARTESIAN_POINT('',(-1.25,0.77,0.E+000)); +#1550 = VECTOR('',#1551,1.); +#1551 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1552 = ORIENTED_EDGE('',*,*,#279,.F.); +#1553 = ORIENTED_EDGE('',*,*,#1065,.F.); +#1554 = ORIENTED_EDGE('',*,*,#1555,.T.); +#1555 = EDGE_CURVE('',#1058,#1556,#1558,.T.); +#1556 = VERTEX_POINT('',#1557); +#1557 = CARTESIAN_POINT('',(-1.5,0.77,0.2)); +#1558 = LINE('',#1559,#1560); +#1559 = CARTESIAN_POINT('',(-1.25,0.77,0.2)); +#1560 = VECTOR('',#1561,1.); +#1561 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1562 = ORIENTED_EDGE('',*,*,#1563,.F.); +#1563 = EDGE_CURVE('',#1540,#1556,#1564,.T.); +#1564 = LINE('',#1565,#1566); +#1565 = CARTESIAN_POINT('',(-1.5,0.77,0.E+000)); +#1566 = VECTOR('',#1567,1.); +#1567 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1568 = PLANE('',#1569); +#1569 = AXIS2_PLACEMENT_3D('',#1570,#1571,#1572); +#1570 = CARTESIAN_POINT('',(-1.25,0.77,0.E+000)); +#1571 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1572 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1573 = ADVANCED_FACE('',(#1574),#1601,.F.); +#1574 = FACE_BOUND('',#1575,.F.); +#1575 = EDGE_LOOP('',(#1576,#1584,#1585,#1586,#1587,#1595)); +#1576 = ORIENTED_EDGE('',*,*,#1577,.F.); +#1577 = EDGE_CURVE('',#1514,#1578,#1580,.T.); +#1578 = VERTEX_POINT('',#1579); +#1579 = CARTESIAN_POINT('',(1.5,0.53,0.E+000)); +#1580 = LINE('',#1581,#1582); +#1581 = CARTESIAN_POINT('',(1.25,0.53,0.E+000)); +#1582 = VECTOR('',#1583,1.); +#1583 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1584 = ORIENTED_EDGE('',*,*,#1523,.T.); +#1585 = ORIENTED_EDGE('',*,*,#583,.F.); +#1586 = ORIENTED_EDGE('',*,*,#800,.T.); +#1587 = ORIENTED_EDGE('',*,*,#1588,.T.); +#1588 = EDGE_CURVE('',#801,#1589,#1591,.T.); +#1589 = VERTEX_POINT('',#1590); +#1590 = CARTESIAN_POINT('',(1.5,0.53,0.2)); +#1591 = LINE('',#1592,#1593); +#1592 = CARTESIAN_POINT('',(1.25,0.53,0.2)); +#1593 = VECTOR('',#1594,1.); +#1594 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1595 = ORIENTED_EDGE('',*,*,#1596,.F.); +#1596 = EDGE_CURVE('',#1578,#1589,#1597,.T.); +#1597 = LINE('',#1598,#1599); +#1598 = CARTESIAN_POINT('',(1.5,0.53,0.E+000)); +#1599 = VECTOR('',#1600,1.); +#1600 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1601 = PLANE('',#1602); +#1602 = AXIS2_PLACEMENT_3D('',#1603,#1604,#1605); +#1603 = CARTESIAN_POINT('',(1.25,0.53,0.E+000)); +#1604 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1605 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1606 = ADVANCED_FACE('',(#1607),#1625,.F.); +#1607 = FACE_BOUND('',#1608,.F.); +#1608 = EDGE_LOOP('',(#1609,#1617,#1623,#1624)); +#1609 = ORIENTED_EDGE('',*,*,#1610,.F.); +#1610 = EDGE_CURVE('',#1611,#1538,#1613,.T.); +#1611 = VERTEX_POINT('',#1612); +#1612 = CARTESIAN_POINT('',(-1.25,0.53,0.E+000)); +#1613 = LINE('',#1614,#1615); +#1614 = CARTESIAN_POINT('',(-1.25,0.53,0.E+000)); +#1615 = VECTOR('',#1616,1.); +#1616 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1617 = ORIENTED_EDGE('',*,*,#1618,.T.); +#1618 = EDGE_CURVE('',#1611,#288,#1619,.T.); +#1619 = LINE('',#1620,#1621); +#1620 = CARTESIAN_POINT('',(-1.25,0.53,0.E+000)); +#1621 = VECTOR('',#1622,1.); +#1622 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1623 = ORIENTED_EDGE('',*,*,#287,.F.); +#1624 = ORIENTED_EDGE('',*,*,#1547,.F.); +#1625 = PLANE('',#1626); +#1626 = AXIS2_PLACEMENT_3D('',#1627,#1628,#1629); +#1627 = CARTESIAN_POINT('',(-1.25,0.53,0.E+000)); +#1628 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1629 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1630 = ADVANCED_FACE('',(#1631),#1658,.F.); +#1631 = FACE_BOUND('',#1632,.F.); +#1632 = EDGE_LOOP('',(#1633,#1641,#1649,#1655,#1656,#1657)); +#1633 = ORIENTED_EDGE('',*,*,#1634,.F.); +#1634 = EDGE_CURVE('',#1635,#1611,#1637,.T.); +#1635 = VERTEX_POINT('',#1636); +#1636 = CARTESIAN_POINT('',(-1.5,0.53,0.E+000)); +#1637 = LINE('',#1638,#1639); +#1638 = CARTESIAN_POINT('',(-1.5,0.53,0.E+000)); +#1639 = VECTOR('',#1640,1.); +#1640 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1641 = ORIENTED_EDGE('',*,*,#1642,.T.); +#1642 = EDGE_CURVE('',#1635,#1643,#1645,.T.); +#1643 = VERTEX_POINT('',#1644); +#1644 = CARTESIAN_POINT('',(-1.5,0.53,0.2)); +#1645 = LINE('',#1646,#1647); +#1646 = CARTESIAN_POINT('',(-1.5,0.53,0.E+000)); +#1647 = VECTOR('',#1648,1.); +#1648 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1649 = ORIENTED_EDGE('',*,*,#1650,.T.); +#1650 = EDGE_CURVE('',#1643,#1050,#1651,.T.); +#1651 = LINE('',#1652,#1653); +#1652 = CARTESIAN_POINT('',(-1.5,0.53,0.2)); +#1653 = VECTOR('',#1654,1.); +#1654 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1655 = ORIENTED_EDGE('',*,*,#1049,.F.); +#1656 = ORIENTED_EDGE('',*,*,#295,.F.); +#1657 = ORIENTED_EDGE('',*,*,#1618,.F.); +#1658 = PLANE('',#1659); +#1659 = AXIS2_PLACEMENT_3D('',#1660,#1661,#1662); +#1660 = CARTESIAN_POINT('',(-1.5,0.53,0.E+000)); +#1661 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1662 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1663 = ADVANCED_FACE('',(#1664),#1698,.F.); +#1664 = FACE_BOUND('',#1665,.F.); +#1665 = EDGE_LOOP('',(#1666,#1676,#1684,#1690,#1691,#1692)); +#1666 = ORIENTED_EDGE('',*,*,#1667,.F.); +#1667 = EDGE_CURVE('',#1668,#1670,#1672,.T.); +#1668 = VERTEX_POINT('',#1669); +#1669 = CARTESIAN_POINT('',(1.5,0.12,0.E+000)); +#1670 = VERTEX_POINT('',#1671); +#1671 = CARTESIAN_POINT('',(1.25,0.12,0.E+000)); +#1672 = LINE('',#1673,#1674); +#1673 = CARTESIAN_POINT('',(1.5,0.12,0.E+000)); +#1674 = VECTOR('',#1675,1.); +#1675 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1676 = ORIENTED_EDGE('',*,*,#1677,.T.); +#1677 = EDGE_CURVE('',#1668,#1678,#1680,.T.); +#1678 = VERTEX_POINT('',#1679); +#1679 = CARTESIAN_POINT('',(1.5,0.12,0.2)); +#1680 = LINE('',#1681,#1682); +#1681 = CARTESIAN_POINT('',(1.5,0.12,0.E+000)); +#1682 = VECTOR('',#1683,1.); +#1683 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1684 = ORIENTED_EDGE('',*,*,#1685,.T.); +#1685 = EDGE_CURVE('',#1678,#786,#1686,.T.); +#1686 = LINE('',#1687,#1688); +#1687 = CARTESIAN_POINT('',(1.5,0.12,0.2)); +#1688 = VECTOR('',#1689,1.); +#1689 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1690 = ORIENTED_EDGE('',*,*,#793,.T.); +#1691 = ORIENTED_EDGE('',*,*,#567,.F.); +#1692 = ORIENTED_EDGE('',*,*,#1693,.F.); +#1693 = EDGE_CURVE('',#1670,#560,#1694,.T.); +#1694 = LINE('',#1695,#1696); +#1695 = CARTESIAN_POINT('',(1.25,0.12,0.E+000)); +#1696 = VECTOR('',#1697,1.); +#1697 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1698 = PLANE('',#1699); +#1699 = AXIS2_PLACEMENT_3D('',#1700,#1701,#1702); +#1700 = CARTESIAN_POINT('',(1.5,0.12,0.E+000)); +#1701 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1702 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1703 = ADVANCED_FACE('',(#1704),#1722,.F.); +#1704 = FACE_BOUND('',#1705,.F.); +#1705 = EDGE_LOOP('',(#1706,#1714,#1715,#1716)); +#1706 = ORIENTED_EDGE('',*,*,#1707,.F.); +#1707 = EDGE_CURVE('',#1670,#1708,#1710,.T.); +#1708 = VERTEX_POINT('',#1709); +#1709 = CARTESIAN_POINT('',(1.25,-0.12,0.E+000)); +#1710 = LINE('',#1711,#1712); +#1711 = CARTESIAN_POINT('',(1.25,0.12,0.E+000)); +#1712 = VECTOR('',#1713,1.); +#1713 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1714 = ORIENTED_EDGE('',*,*,#1693,.T.); +#1715 = ORIENTED_EDGE('',*,*,#559,.F.); +#1716 = ORIENTED_EDGE('',*,*,#1717,.F.); +#1717 = EDGE_CURVE('',#1708,#552,#1718,.T.); +#1718 = LINE('',#1719,#1720); +#1719 = CARTESIAN_POINT('',(1.25,-0.12,0.E+000)); +#1720 = VECTOR('',#1721,1.); +#1721 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1722 = PLANE('',#1723); +#1723 = AXIS2_PLACEMENT_3D('',#1724,#1725,#1726); +#1724 = CARTESIAN_POINT('',(1.25,0.12,0.E+000)); +#1725 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1726 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1727 = ADVANCED_FACE('',(#1728),#1762,.F.); +#1728 = FACE_BOUND('',#1729,.F.); +#1729 = EDGE_LOOP('',(#1730,#1740,#1746,#1747,#1748,#1756)); +#1730 = ORIENTED_EDGE('',*,*,#1731,.F.); +#1731 = EDGE_CURVE('',#1732,#1734,#1736,.T.); +#1732 = VERTEX_POINT('',#1733); +#1733 = CARTESIAN_POINT('',(-1.25,0.12,0.E+000)); +#1734 = VERTEX_POINT('',#1735); +#1735 = CARTESIAN_POINT('',(-1.5,0.12,0.E+000)); +#1736 = LINE('',#1737,#1738); +#1737 = CARTESIAN_POINT('',(-1.25,0.12,0.E+000)); +#1738 = VECTOR('',#1739,1.); +#1739 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1740 = ORIENTED_EDGE('',*,*,#1741,.T.); +#1741 = EDGE_CURVE('',#1732,#312,#1742,.T.); +#1742 = LINE('',#1743,#1744); +#1743 = CARTESIAN_POINT('',(-1.25,0.12,0.E+000)); +#1744 = VECTOR('',#1745,1.); +#1745 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1746 = ORIENTED_EDGE('',*,*,#311,.F.); +#1747 = ORIENTED_EDGE('',*,*,#1042,.F.); +#1748 = ORIENTED_EDGE('',*,*,#1749,.T.); +#1749 = EDGE_CURVE('',#1035,#1750,#1752,.T.); +#1750 = VERTEX_POINT('',#1751); +#1751 = CARTESIAN_POINT('',(-1.5,0.12,0.2)); +#1752 = LINE('',#1753,#1754); +#1753 = CARTESIAN_POINT('',(-1.25,0.12,0.2)); +#1754 = VECTOR('',#1755,1.); +#1755 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1756 = ORIENTED_EDGE('',*,*,#1757,.F.); +#1757 = EDGE_CURVE('',#1734,#1750,#1758,.T.); +#1758 = LINE('',#1759,#1760); +#1759 = CARTESIAN_POINT('',(-1.5,0.12,0.E+000)); +#1760 = VECTOR('',#1761,1.); +#1761 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1762 = PLANE('',#1763); +#1763 = AXIS2_PLACEMENT_3D('',#1764,#1765,#1766); +#1764 = CARTESIAN_POINT('',(-1.25,0.12,0.E+000)); +#1765 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1766 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1767 = ADVANCED_FACE('',(#1768),#1795,.F.); +#1768 = FACE_BOUND('',#1769,.F.); +#1769 = EDGE_LOOP('',(#1770,#1778,#1779,#1780,#1781,#1789)); +#1770 = ORIENTED_EDGE('',*,*,#1771,.F.); +#1771 = EDGE_CURVE('',#1708,#1772,#1774,.T.); +#1772 = VERTEX_POINT('',#1773); +#1773 = CARTESIAN_POINT('',(1.5,-0.12,0.E+000)); +#1774 = LINE('',#1775,#1776); +#1775 = CARTESIAN_POINT('',(1.25,-0.12,0.E+000)); +#1776 = VECTOR('',#1777,1.); +#1777 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1778 = ORIENTED_EDGE('',*,*,#1717,.T.); +#1779 = ORIENTED_EDGE('',*,*,#551,.F.); +#1780 = ORIENTED_EDGE('',*,*,#777,.T.); +#1781 = ORIENTED_EDGE('',*,*,#1782,.T.); +#1782 = EDGE_CURVE('',#778,#1783,#1785,.T.); +#1783 = VERTEX_POINT('',#1784); +#1784 = CARTESIAN_POINT('',(1.5,-0.12,0.2)); +#1785 = LINE('',#1786,#1787); +#1786 = CARTESIAN_POINT('',(1.25,-0.12,0.2)); +#1787 = VECTOR('',#1788,1.); +#1788 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1789 = ORIENTED_EDGE('',*,*,#1790,.F.); +#1790 = EDGE_CURVE('',#1772,#1783,#1791,.T.); +#1791 = LINE('',#1792,#1793); +#1792 = CARTESIAN_POINT('',(1.5,-0.12,0.E+000)); +#1793 = VECTOR('',#1794,1.); +#1794 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1795 = PLANE('',#1796); +#1796 = AXIS2_PLACEMENT_3D('',#1797,#1798,#1799); +#1797 = CARTESIAN_POINT('',(1.25,-0.12,0.E+000)); +#1798 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1799 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1800 = ADVANCED_FACE('',(#1801),#1819,.F.); +#1801 = FACE_BOUND('',#1802,.F.); +#1802 = EDGE_LOOP('',(#1803,#1811,#1817,#1818)); +#1803 = ORIENTED_EDGE('',*,*,#1804,.F.); +#1804 = EDGE_CURVE('',#1805,#1732,#1807,.T.); +#1805 = VERTEX_POINT('',#1806); +#1806 = CARTESIAN_POINT('',(-1.25,-0.12,0.E+000)); +#1807 = LINE('',#1808,#1809); +#1808 = CARTESIAN_POINT('',(-1.25,-0.12,0.E+000)); +#1809 = VECTOR('',#1810,1.); +#1810 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1811 = ORIENTED_EDGE('',*,*,#1812,.T.); +#1812 = EDGE_CURVE('',#1805,#320,#1813,.T.); +#1813 = LINE('',#1814,#1815); +#1814 = CARTESIAN_POINT('',(-1.25,-0.12,0.E+000)); +#1815 = VECTOR('',#1816,1.); +#1816 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1817 = ORIENTED_EDGE('',*,*,#319,.F.); +#1818 = ORIENTED_EDGE('',*,*,#1741,.F.); +#1819 = PLANE('',#1820); +#1820 = AXIS2_PLACEMENT_3D('',#1821,#1822,#1823); +#1821 = CARTESIAN_POINT('',(-1.25,-0.12,0.E+000)); +#1822 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1823 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1824 = ADVANCED_FACE('',(#1825),#1852,.F.); +#1825 = FACE_BOUND('',#1826,.F.); +#1826 = EDGE_LOOP('',(#1827,#1835,#1843,#1849,#1850,#1851)); +#1827 = ORIENTED_EDGE('',*,*,#1828,.F.); +#1828 = EDGE_CURVE('',#1829,#1805,#1831,.T.); +#1829 = VERTEX_POINT('',#1830); +#1830 = CARTESIAN_POINT('',(-1.5,-0.12,0.E+000)); +#1831 = LINE('',#1832,#1833); +#1832 = CARTESIAN_POINT('',(-1.5,-0.12,0.E+000)); +#1833 = VECTOR('',#1834,1.); +#1834 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1835 = ORIENTED_EDGE('',*,*,#1836,.T.); +#1836 = EDGE_CURVE('',#1829,#1837,#1839,.T.); +#1837 = VERTEX_POINT('',#1838); +#1838 = CARTESIAN_POINT('',(-1.5,-0.12,0.2)); +#1839 = LINE('',#1840,#1841); +#1840 = CARTESIAN_POINT('',(-1.5,-0.12,0.E+000)); +#1841 = VECTOR('',#1842,1.); +#1842 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1843 = ORIENTED_EDGE('',*,*,#1844,.T.); +#1844 = EDGE_CURVE('',#1837,#1027,#1845,.T.); +#1845 = LINE('',#1846,#1847); +#1846 = CARTESIAN_POINT('',(-1.5,-0.12,0.2)); +#1847 = VECTOR('',#1848,1.); +#1848 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1849 = ORIENTED_EDGE('',*,*,#1026,.F.); +#1850 = ORIENTED_EDGE('',*,*,#327,.F.); +#1851 = ORIENTED_EDGE('',*,*,#1812,.F.); +#1852 = PLANE('',#1853); +#1853 = AXIS2_PLACEMENT_3D('',#1854,#1855,#1856); +#1854 = CARTESIAN_POINT('',(-1.5,-0.12,0.E+000)); +#1855 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1856 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1857 = ADVANCED_FACE('',(#1858),#1892,.F.); +#1858 = FACE_BOUND('',#1859,.F.); +#1859 = EDGE_LOOP('',(#1860,#1870,#1878,#1884,#1885,#1886)); +#1860 = ORIENTED_EDGE('',*,*,#1861,.F.); +#1861 = EDGE_CURVE('',#1862,#1864,#1866,.T.); +#1862 = VERTEX_POINT('',#1863); +#1863 = CARTESIAN_POINT('',(1.5,-0.53,0.E+000)); +#1864 = VERTEX_POINT('',#1865); +#1865 = CARTESIAN_POINT('',(1.25,-0.53,0.E+000)); +#1866 = LINE('',#1867,#1868); +#1867 = CARTESIAN_POINT('',(1.5,-0.53,0.E+000)); +#1868 = VECTOR('',#1869,1.); +#1869 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1870 = ORIENTED_EDGE('',*,*,#1871,.T.); +#1871 = EDGE_CURVE('',#1862,#1872,#1874,.T.); +#1872 = VERTEX_POINT('',#1873); +#1873 = CARTESIAN_POINT('',(1.5,-0.53,0.2)); +#1874 = LINE('',#1875,#1876); +#1875 = CARTESIAN_POINT('',(1.5,-0.53,0.E+000)); +#1876 = VECTOR('',#1877,1.); +#1877 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1878 = ORIENTED_EDGE('',*,*,#1879,.T.); +#1879 = EDGE_CURVE('',#1872,#763,#1880,.T.); +#1880 = LINE('',#1881,#1882); +#1881 = CARTESIAN_POINT('',(1.5,-0.53,0.2)); +#1882 = VECTOR('',#1883,1.); +#1883 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1884 = ORIENTED_EDGE('',*,*,#770,.T.); +#1885 = ORIENTED_EDGE('',*,*,#535,.F.); +#1886 = ORIENTED_EDGE('',*,*,#1887,.F.); +#1887 = EDGE_CURVE('',#1864,#528,#1888,.T.); +#1888 = LINE('',#1889,#1890); +#1889 = CARTESIAN_POINT('',(1.25,-0.53,0.E+000)); +#1890 = VECTOR('',#1891,1.); +#1891 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1892 = PLANE('',#1893); +#1893 = AXIS2_PLACEMENT_3D('',#1894,#1895,#1896); +#1894 = CARTESIAN_POINT('',(1.5,-0.53,0.E+000)); +#1895 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1896 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1897 = ADVANCED_FACE('',(#1898),#1916,.F.); +#1898 = FACE_BOUND('',#1899,.F.); +#1899 = EDGE_LOOP('',(#1900,#1908,#1909,#1910)); +#1900 = ORIENTED_EDGE('',*,*,#1901,.F.); +#1901 = EDGE_CURVE('',#1864,#1902,#1904,.T.); +#1902 = VERTEX_POINT('',#1903); +#1903 = CARTESIAN_POINT('',(1.25,-0.77,0.E+000)); +#1904 = LINE('',#1905,#1906); +#1905 = CARTESIAN_POINT('',(1.25,-0.53,0.E+000)); +#1906 = VECTOR('',#1907,1.); +#1907 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1908 = ORIENTED_EDGE('',*,*,#1887,.T.); +#1909 = ORIENTED_EDGE('',*,*,#527,.F.); +#1910 = ORIENTED_EDGE('',*,*,#1911,.F.); +#1911 = EDGE_CURVE('',#1902,#520,#1912,.T.); +#1912 = LINE('',#1913,#1914); +#1913 = CARTESIAN_POINT('',(1.25,-0.77,0.E+000)); +#1914 = VECTOR('',#1915,1.); +#1915 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1916 = PLANE('',#1917); +#1917 = AXIS2_PLACEMENT_3D('',#1918,#1919,#1920); +#1918 = CARTESIAN_POINT('',(1.25,-0.53,0.E+000)); +#1919 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1920 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1921 = ADVANCED_FACE('',(#1922),#1956,.F.); +#1922 = FACE_BOUND('',#1923,.F.); +#1923 = EDGE_LOOP('',(#1924,#1934,#1940,#1941,#1942,#1950)); +#1924 = ORIENTED_EDGE('',*,*,#1925,.F.); +#1925 = EDGE_CURVE('',#1926,#1928,#1930,.T.); +#1926 = VERTEX_POINT('',#1927); +#1927 = CARTESIAN_POINT('',(-1.25,-0.53,0.E+000)); +#1928 = VERTEX_POINT('',#1929); +#1929 = CARTESIAN_POINT('',(-1.5,-0.53,0.E+000)); +#1930 = LINE('',#1931,#1932); +#1931 = CARTESIAN_POINT('',(-1.25,-0.53,0.E+000)); +#1932 = VECTOR('',#1933,1.); +#1933 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1934 = ORIENTED_EDGE('',*,*,#1935,.T.); +#1935 = EDGE_CURVE('',#1926,#344,#1936,.T.); +#1936 = LINE('',#1937,#1938); +#1937 = CARTESIAN_POINT('',(-1.25,-0.53,0.E+000)); +#1938 = VECTOR('',#1939,1.); +#1939 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1940 = ORIENTED_EDGE('',*,*,#343,.F.); +#1941 = ORIENTED_EDGE('',*,*,#1019,.F.); +#1942 = ORIENTED_EDGE('',*,*,#1943,.T.); +#1943 = EDGE_CURVE('',#1012,#1944,#1946,.T.); +#1944 = VERTEX_POINT('',#1945); +#1945 = CARTESIAN_POINT('',(-1.5,-0.53,0.2)); +#1946 = LINE('',#1947,#1948); +#1947 = CARTESIAN_POINT('',(-1.25,-0.53,0.2)); +#1948 = VECTOR('',#1949,1.); +#1949 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1950 = ORIENTED_EDGE('',*,*,#1951,.F.); +#1951 = EDGE_CURVE('',#1928,#1944,#1952,.T.); +#1952 = LINE('',#1953,#1954); +#1953 = CARTESIAN_POINT('',(-1.5,-0.53,0.E+000)); +#1954 = VECTOR('',#1955,1.); +#1955 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1956 = PLANE('',#1957); +#1957 = AXIS2_PLACEMENT_3D('',#1958,#1959,#1960); +#1958 = CARTESIAN_POINT('',(-1.25,-0.53,0.E+000)); +#1959 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1960 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1961 = ADVANCED_FACE('',(#1962),#1989,.F.); +#1962 = FACE_BOUND('',#1963,.F.); +#1963 = EDGE_LOOP('',(#1964,#1972,#1973,#1974,#1975,#1983)); +#1964 = ORIENTED_EDGE('',*,*,#1965,.F.); +#1965 = EDGE_CURVE('',#1902,#1966,#1968,.T.); +#1966 = VERTEX_POINT('',#1967); +#1967 = CARTESIAN_POINT('',(1.5,-0.77,0.E+000)); +#1968 = LINE('',#1969,#1970); +#1969 = CARTESIAN_POINT('',(1.25,-0.77,0.E+000)); +#1970 = VECTOR('',#1971,1.); +#1971 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1972 = ORIENTED_EDGE('',*,*,#1911,.T.); +#1973 = ORIENTED_EDGE('',*,*,#519,.F.); +#1974 = ORIENTED_EDGE('',*,*,#754,.T.); +#1975 = ORIENTED_EDGE('',*,*,#1976,.T.); +#1976 = EDGE_CURVE('',#755,#1977,#1979,.T.); +#1977 = VERTEX_POINT('',#1978); +#1978 = CARTESIAN_POINT('',(1.5,-0.77,0.2)); +#1979 = LINE('',#1980,#1981); +#1980 = CARTESIAN_POINT('',(1.25,-0.77,0.2)); +#1981 = VECTOR('',#1982,1.); +#1982 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1983 = ORIENTED_EDGE('',*,*,#1984,.F.); +#1984 = EDGE_CURVE('',#1966,#1977,#1985,.T.); +#1985 = LINE('',#1986,#1987); +#1986 = CARTESIAN_POINT('',(1.5,-0.77,0.E+000)); +#1987 = VECTOR('',#1988,1.); +#1988 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1989 = PLANE('',#1990); +#1990 = AXIS2_PLACEMENT_3D('',#1991,#1992,#1993); +#1991 = CARTESIAN_POINT('',(1.25,-0.77,0.E+000)); +#1992 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1993 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1994 = ADVANCED_FACE('',(#1995),#2013,.F.); +#1995 = FACE_BOUND('',#1996,.F.); +#1996 = EDGE_LOOP('',(#1997,#2005,#2011,#2012)); +#1997 = ORIENTED_EDGE('',*,*,#1998,.F.); +#1998 = EDGE_CURVE('',#1999,#1926,#2001,.T.); +#1999 = VERTEX_POINT('',#2000); +#2000 = CARTESIAN_POINT('',(-1.25,-0.77,0.E+000)); +#2001 = LINE('',#2002,#2003); +#2002 = CARTESIAN_POINT('',(-1.25,-0.77,0.E+000)); +#2003 = VECTOR('',#2004,1.); +#2004 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2005 = ORIENTED_EDGE('',*,*,#2006,.T.); +#2006 = EDGE_CURVE('',#1999,#352,#2007,.T.); +#2007 = LINE('',#2008,#2009); +#2008 = CARTESIAN_POINT('',(-1.25,-0.77,0.E+000)); +#2009 = VECTOR('',#2010,1.); +#2010 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2011 = ORIENTED_EDGE('',*,*,#351,.F.); +#2012 = ORIENTED_EDGE('',*,*,#1935,.F.); +#2013 = PLANE('',#2014); +#2014 = AXIS2_PLACEMENT_3D('',#2015,#2016,#2017); +#2015 = CARTESIAN_POINT('',(-1.25,-0.77,0.E+000)); +#2016 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2017 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2018 = ADVANCED_FACE('',(#2019),#2046,.F.); +#2019 = FACE_BOUND('',#2020,.F.); +#2020 = EDGE_LOOP('',(#2021,#2029,#2037,#2043,#2044,#2045)); +#2021 = ORIENTED_EDGE('',*,*,#2022,.F.); +#2022 = EDGE_CURVE('',#2023,#1999,#2025,.T.); +#2023 = VERTEX_POINT('',#2024); +#2024 = CARTESIAN_POINT('',(-1.5,-0.77,0.E+000)); +#2025 = LINE('',#2026,#2027); +#2026 = CARTESIAN_POINT('',(-1.5,-0.77,0.E+000)); +#2027 = VECTOR('',#2028,1.); +#2028 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2029 = ORIENTED_EDGE('',*,*,#2030,.T.); +#2030 = EDGE_CURVE('',#2023,#2031,#2033,.T.); +#2031 = VERTEX_POINT('',#2032); +#2032 = CARTESIAN_POINT('',(-1.5,-0.77,0.2)); +#2033 = LINE('',#2034,#2035); +#2034 = CARTESIAN_POINT('',(-1.5,-0.77,0.E+000)); +#2035 = VECTOR('',#2036,1.); +#2036 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2037 = ORIENTED_EDGE('',*,*,#2038,.T.); +#2038 = EDGE_CURVE('',#2031,#1004,#2039,.T.); +#2039 = LINE('',#2040,#2041); +#2040 = CARTESIAN_POINT('',(-1.5,-0.77,0.2)); +#2041 = VECTOR('',#2042,1.); +#2042 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2043 = ORIENTED_EDGE('',*,*,#1003,.F.); +#2044 = ORIENTED_EDGE('',*,*,#359,.F.); +#2045 = ORIENTED_EDGE('',*,*,#2006,.F.); +#2046 = PLANE('',#2047); +#2047 = AXIS2_PLACEMENT_3D('',#2048,#2049,#2050); +#2048 = CARTESIAN_POINT('',(-1.5,-0.77,0.E+000)); +#2049 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2050 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2051 = ADVANCED_FACE('',(#2052),#2086,.F.); +#2052 = FACE_BOUND('',#2053,.F.); +#2053 = EDGE_LOOP('',(#2054,#2064,#2072,#2078,#2079,#2080)); +#2054 = ORIENTED_EDGE('',*,*,#2055,.F.); +#2055 = EDGE_CURVE('',#2056,#2058,#2060,.T.); +#2056 = VERTEX_POINT('',#2057); +#2057 = CARTESIAN_POINT('',(1.5,-1.18,0.E+000)); +#2058 = VERTEX_POINT('',#2059); +#2059 = CARTESIAN_POINT('',(1.25,-1.18,0.E+000)); +#2060 = LINE('',#2061,#2062); +#2061 = CARTESIAN_POINT('',(1.5,-1.18,0.E+000)); +#2062 = VECTOR('',#2063,1.); +#2063 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2064 = ORIENTED_EDGE('',*,*,#2065,.T.); +#2065 = EDGE_CURVE('',#2056,#2066,#2068,.T.); +#2066 = VERTEX_POINT('',#2067); +#2067 = CARTESIAN_POINT('',(1.5,-1.18,0.2)); +#2068 = LINE('',#2069,#2070); +#2069 = CARTESIAN_POINT('',(1.5,-1.18,0.E+000)); +#2070 = VECTOR('',#2071,1.); +#2071 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2072 = ORIENTED_EDGE('',*,*,#2073,.T.); +#2073 = EDGE_CURVE('',#2066,#740,#2074,.T.); +#2074 = LINE('',#2075,#2076); +#2075 = CARTESIAN_POINT('',(1.5,-1.18,0.2)); +#2076 = VECTOR('',#2077,1.); +#2077 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2078 = ORIENTED_EDGE('',*,*,#747,.T.); +#2079 = ORIENTED_EDGE('',*,*,#503,.F.); +#2080 = ORIENTED_EDGE('',*,*,#2081,.F.); +#2081 = EDGE_CURVE('',#2058,#496,#2082,.T.); +#2082 = LINE('',#2083,#2084); +#2083 = CARTESIAN_POINT('',(1.25,-1.18,0.E+000)); +#2084 = VECTOR('',#2085,1.); +#2085 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2086 = PLANE('',#2087); +#2087 = AXIS2_PLACEMENT_3D('',#2088,#2089,#2090); +#2088 = CARTESIAN_POINT('',(1.5,-1.18,0.E+000)); +#2089 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2090 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2091 = ADVANCED_FACE('',(#2092),#2110,.F.); +#2092 = FACE_BOUND('',#2093,.F.); +#2093 = EDGE_LOOP('',(#2094,#2102,#2103,#2104)); +#2094 = ORIENTED_EDGE('',*,*,#2095,.F.); +#2095 = EDGE_CURVE('',#2058,#2096,#2098,.T.); +#2096 = VERTEX_POINT('',#2097); +#2097 = CARTESIAN_POINT('',(1.25,-1.42,0.E+000)); +#2098 = LINE('',#2099,#2100); +#2099 = CARTESIAN_POINT('',(1.25,-1.18,0.E+000)); +#2100 = VECTOR('',#2101,1.); +#2101 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2102 = ORIENTED_EDGE('',*,*,#2081,.T.); +#2103 = ORIENTED_EDGE('',*,*,#495,.F.); +#2104 = ORIENTED_EDGE('',*,*,#2105,.F.); +#2105 = EDGE_CURVE('',#2096,#488,#2106,.T.); +#2106 = LINE('',#2107,#2108); +#2107 = CARTESIAN_POINT('',(1.25,-1.42,0.E+000)); +#2108 = VECTOR('',#2109,1.); +#2109 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2110 = PLANE('',#2111); +#2111 = AXIS2_PLACEMENT_3D('',#2112,#2113,#2114); +#2112 = CARTESIAN_POINT('',(1.25,-1.18,0.E+000)); +#2113 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2114 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2115 = ADVANCED_FACE('',(#2116),#2150,.F.); +#2116 = FACE_BOUND('',#2117,.F.); +#2117 = EDGE_LOOP('',(#2118,#2128,#2134,#2135,#2136,#2144)); +#2118 = ORIENTED_EDGE('',*,*,#2119,.F.); +#2119 = EDGE_CURVE('',#2120,#2122,#2124,.T.); +#2120 = VERTEX_POINT('',#2121); +#2121 = CARTESIAN_POINT('',(-1.25,-1.18,0.E+000)); +#2122 = VERTEX_POINT('',#2123); +#2123 = CARTESIAN_POINT('',(-1.5,-1.18,0.E+000)); +#2124 = LINE('',#2125,#2126); +#2125 = CARTESIAN_POINT('',(-1.25,-1.18,0.E+000)); +#2126 = VECTOR('',#2127,1.); +#2127 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2128 = ORIENTED_EDGE('',*,*,#2129,.T.); +#2129 = EDGE_CURVE('',#2120,#376,#2130,.T.); +#2130 = LINE('',#2131,#2132); +#2131 = CARTESIAN_POINT('',(-1.25,-1.18,0.E+000)); +#2132 = VECTOR('',#2133,1.); +#2133 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2134 = ORIENTED_EDGE('',*,*,#375,.F.); +#2135 = ORIENTED_EDGE('',*,*,#996,.F.); +#2136 = ORIENTED_EDGE('',*,*,#2137,.T.); +#2137 = EDGE_CURVE('',#989,#2138,#2140,.T.); +#2138 = VERTEX_POINT('',#2139); +#2139 = CARTESIAN_POINT('',(-1.5,-1.18,0.2)); +#2140 = LINE('',#2141,#2142); +#2141 = CARTESIAN_POINT('',(-1.25,-1.18,0.2)); +#2142 = VECTOR('',#2143,1.); +#2143 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2144 = ORIENTED_EDGE('',*,*,#2145,.F.); +#2145 = EDGE_CURVE('',#2122,#2138,#2146,.T.); +#2146 = LINE('',#2147,#2148); +#2147 = CARTESIAN_POINT('',(-1.5,-1.18,0.E+000)); +#2148 = VECTOR('',#2149,1.); +#2149 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2150 = PLANE('',#2151); +#2151 = AXIS2_PLACEMENT_3D('',#2152,#2153,#2154); +#2152 = CARTESIAN_POINT('',(-1.25,-1.18,0.E+000)); +#2153 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2154 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2155 = ADVANCED_FACE('',(#2156),#2183,.F.); +#2156 = FACE_BOUND('',#2157,.F.); +#2157 = EDGE_LOOP('',(#2158,#2166,#2167,#2168,#2169,#2177)); +#2158 = ORIENTED_EDGE('',*,*,#2159,.F.); +#2159 = EDGE_CURVE('',#2096,#2160,#2162,.T.); +#2160 = VERTEX_POINT('',#2161); +#2161 = CARTESIAN_POINT('',(1.5,-1.42,0.E+000)); +#2162 = LINE('',#2163,#2164); +#2163 = CARTESIAN_POINT('',(1.25,-1.42,0.E+000)); +#2164 = VECTOR('',#2165,1.); +#2165 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2166 = ORIENTED_EDGE('',*,*,#2105,.T.); +#2167 = ORIENTED_EDGE('',*,*,#487,.F.); +#2168 = ORIENTED_EDGE('',*,*,#731,.T.); +#2169 = ORIENTED_EDGE('',*,*,#2170,.T.); +#2170 = EDGE_CURVE('',#732,#2171,#2173,.T.); +#2171 = VERTEX_POINT('',#2172); +#2172 = CARTESIAN_POINT('',(1.5,-1.42,0.2)); +#2173 = LINE('',#2174,#2175); +#2174 = CARTESIAN_POINT('',(1.25,-1.42,0.2)); +#2175 = VECTOR('',#2176,1.); +#2176 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2177 = ORIENTED_EDGE('',*,*,#2178,.F.); +#2178 = EDGE_CURVE('',#2160,#2171,#2179,.T.); +#2179 = LINE('',#2180,#2181); +#2180 = CARTESIAN_POINT('',(1.5,-1.42,0.E+000)); +#2181 = VECTOR('',#2182,1.); +#2182 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2183 = PLANE('',#2184); +#2184 = AXIS2_PLACEMENT_3D('',#2185,#2186,#2187); +#2185 = CARTESIAN_POINT('',(1.25,-1.42,0.E+000)); +#2186 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2187 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2188 = ADVANCED_FACE('',(#2189),#2207,.F.); +#2189 = FACE_BOUND('',#2190,.F.); +#2190 = EDGE_LOOP('',(#2191,#2199,#2205,#2206)); +#2191 = ORIENTED_EDGE('',*,*,#2192,.F.); +#2192 = EDGE_CURVE('',#2193,#2120,#2195,.T.); +#2193 = VERTEX_POINT('',#2194); +#2194 = CARTESIAN_POINT('',(-1.25,-1.42,0.E+000)); +#2195 = LINE('',#2196,#2197); +#2196 = CARTESIAN_POINT('',(-1.25,-1.42,0.E+000)); +#2197 = VECTOR('',#2198,1.); +#2198 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2199 = ORIENTED_EDGE('',*,*,#2200,.T.); +#2200 = EDGE_CURVE('',#2193,#384,#2201,.T.); +#2201 = LINE('',#2202,#2203); +#2202 = CARTESIAN_POINT('',(-1.25,-1.42,0.E+000)); +#2203 = VECTOR('',#2204,1.); +#2204 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2205 = ORIENTED_EDGE('',*,*,#383,.F.); +#2206 = ORIENTED_EDGE('',*,*,#2129,.F.); +#2207 = PLANE('',#2208); +#2208 = AXIS2_PLACEMENT_3D('',#2209,#2210,#2211); +#2209 = CARTESIAN_POINT('',(-1.25,-1.42,0.E+000)); +#2210 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2211 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2212 = ADVANCED_FACE('',(#2213),#2240,.F.); +#2213 = FACE_BOUND('',#2214,.F.); +#2214 = EDGE_LOOP('',(#2215,#2223,#2231,#2237,#2238,#2239)); +#2215 = ORIENTED_EDGE('',*,*,#2216,.F.); +#2216 = EDGE_CURVE('',#2217,#2193,#2219,.T.); +#2217 = VERTEX_POINT('',#2218); +#2218 = CARTESIAN_POINT('',(-1.5,-1.42,0.E+000)); +#2219 = LINE('',#2220,#2221); +#2220 = CARTESIAN_POINT('',(-1.5,-1.42,0.E+000)); +#2221 = VECTOR('',#2222,1.); +#2222 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2223 = ORIENTED_EDGE('',*,*,#2224,.T.); +#2224 = EDGE_CURVE('',#2217,#2225,#2227,.T.); +#2225 = VERTEX_POINT('',#2226); +#2226 = CARTESIAN_POINT('',(-1.5,-1.42,0.2)); +#2227 = LINE('',#2228,#2229); +#2228 = CARTESIAN_POINT('',(-1.5,-1.42,0.E+000)); +#2229 = VECTOR('',#2230,1.); +#2230 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2231 = ORIENTED_EDGE('',*,*,#2232,.T.); +#2232 = EDGE_CURVE('',#2225,#981,#2233,.T.); +#2233 = LINE('',#2234,#2235); +#2234 = CARTESIAN_POINT('',(-1.5,-1.42,0.2)); +#2235 = VECTOR('',#2236,1.); +#2236 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2237 = ORIENTED_EDGE('',*,*,#980,.F.); +#2238 = ORIENTED_EDGE('',*,*,#391,.F.); +#2239 = ORIENTED_EDGE('',*,*,#2200,.F.); +#2240 = PLANE('',#2241); +#2241 = AXIS2_PLACEMENT_3D('',#2242,#2243,#2244); +#2242 = CARTESIAN_POINT('',(-1.5,-1.42,0.E+000)); +#2243 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2244 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2245 = ADVANCED_FACE('',(#2246),#2280,.F.); +#2246 = FACE_BOUND('',#2247,.F.); +#2247 = EDGE_LOOP('',(#2248,#2258,#2266,#2272,#2273,#2274)); +#2248 = ORIENTED_EDGE('',*,*,#2249,.F.); +#2249 = EDGE_CURVE('',#2250,#2252,#2254,.T.); +#2250 = VERTEX_POINT('',#2251); +#2251 = CARTESIAN_POINT('',(1.5,-1.83,0.E+000)); +#2252 = VERTEX_POINT('',#2253); +#2253 = CARTESIAN_POINT('',(1.25,-1.83,0.E+000)); +#2254 = LINE('',#2255,#2256); +#2255 = CARTESIAN_POINT('',(1.5,-1.83,0.E+000)); +#2256 = VECTOR('',#2257,1.); +#2257 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2258 = ORIENTED_EDGE('',*,*,#2259,.T.); +#2259 = EDGE_CURVE('',#2250,#2260,#2262,.T.); +#2260 = VERTEX_POINT('',#2261); +#2261 = CARTESIAN_POINT('',(1.5,-1.83,0.2)); +#2262 = LINE('',#2263,#2264); +#2263 = CARTESIAN_POINT('',(1.5,-1.83,0.E+000)); +#2264 = VECTOR('',#2265,1.); +#2265 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2266 = ORIENTED_EDGE('',*,*,#2267,.T.); +#2267 = EDGE_CURVE('',#2260,#717,#2268,.T.); +#2268 = LINE('',#2269,#2270); +#2269 = CARTESIAN_POINT('',(1.5,-1.83,0.2)); +#2270 = VECTOR('',#2271,1.); +#2271 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2272 = ORIENTED_EDGE('',*,*,#724,.T.); +#2273 = ORIENTED_EDGE('',*,*,#471,.F.); +#2274 = ORIENTED_EDGE('',*,*,#2275,.F.); +#2275 = EDGE_CURVE('',#2252,#464,#2276,.T.); +#2276 = LINE('',#2277,#2278); +#2277 = CARTESIAN_POINT('',(1.25,-1.83,0.E+000)); +#2278 = VECTOR('',#2279,1.); +#2279 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2280 = PLANE('',#2281); +#2281 = AXIS2_PLACEMENT_3D('',#2282,#2283,#2284); +#2282 = CARTESIAN_POINT('',(1.5,-1.83,0.E+000)); +#2283 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2284 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2285 = ADVANCED_FACE('',(#2286),#2304,.F.); +#2286 = FACE_BOUND('',#2287,.F.); +#2287 = EDGE_LOOP('',(#2288,#2296,#2297,#2298)); +#2288 = ORIENTED_EDGE('',*,*,#2289,.F.); +#2289 = EDGE_CURVE('',#2252,#2290,#2292,.T.); +#2290 = VERTEX_POINT('',#2291); +#2291 = CARTESIAN_POINT('',(1.25,-2.07,0.E+000)); +#2292 = LINE('',#2293,#2294); +#2293 = CARTESIAN_POINT('',(1.25,-1.83,0.E+000)); +#2294 = VECTOR('',#2295,1.); +#2295 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2296 = ORIENTED_EDGE('',*,*,#2275,.T.); +#2297 = ORIENTED_EDGE('',*,*,#463,.F.); +#2298 = ORIENTED_EDGE('',*,*,#2299,.F.); +#2299 = EDGE_CURVE('',#2290,#456,#2300,.T.); +#2300 = LINE('',#2301,#2302); +#2301 = CARTESIAN_POINT('',(1.25,-2.07,0.E+000)); +#2302 = VECTOR('',#2303,1.); +#2303 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2304 = PLANE('',#2305); +#2305 = AXIS2_PLACEMENT_3D('',#2306,#2307,#2308); +#2306 = CARTESIAN_POINT('',(1.25,-1.83,0.E+000)); +#2307 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2308 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2309 = ADVANCED_FACE('',(#2310),#2344,.F.); +#2310 = FACE_BOUND('',#2311,.F.); +#2311 = EDGE_LOOP('',(#2312,#2322,#2328,#2329,#2330,#2338)); +#2312 = ORIENTED_EDGE('',*,*,#2313,.F.); +#2313 = EDGE_CURVE('',#2314,#2316,#2318,.T.); +#2314 = VERTEX_POINT('',#2315); +#2315 = CARTESIAN_POINT('',(-1.25,-1.83,0.E+000)); +#2316 = VERTEX_POINT('',#2317); +#2317 = CARTESIAN_POINT('',(-1.5,-1.83,0.E+000)); +#2318 = LINE('',#2319,#2320); +#2319 = CARTESIAN_POINT('',(-1.25,-1.83,0.E+000)); +#2320 = VECTOR('',#2321,1.); +#2321 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2322 = ORIENTED_EDGE('',*,*,#2323,.T.); +#2323 = EDGE_CURVE('',#2314,#408,#2324,.T.); +#2324 = LINE('',#2325,#2326); +#2325 = CARTESIAN_POINT('',(-1.25,-1.83,0.E+000)); +#2326 = VECTOR('',#2327,1.); +#2327 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2328 = ORIENTED_EDGE('',*,*,#407,.F.); +#2329 = ORIENTED_EDGE('',*,*,#973,.F.); +#2330 = ORIENTED_EDGE('',*,*,#2331,.T.); +#2331 = EDGE_CURVE('',#966,#2332,#2334,.T.); +#2332 = VERTEX_POINT('',#2333); +#2333 = CARTESIAN_POINT('',(-1.5,-1.83,0.2)); +#2334 = LINE('',#2335,#2336); +#2335 = CARTESIAN_POINT('',(-1.25,-1.83,0.2)); +#2336 = VECTOR('',#2337,1.); +#2337 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2338 = ORIENTED_EDGE('',*,*,#2339,.F.); +#2339 = EDGE_CURVE('',#2316,#2332,#2340,.T.); +#2340 = LINE('',#2341,#2342); +#2341 = CARTESIAN_POINT('',(-1.5,-1.83,0.E+000)); +#2342 = VECTOR('',#2343,1.); +#2343 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2344 = PLANE('',#2345); +#2345 = AXIS2_PLACEMENT_3D('',#2346,#2347,#2348); +#2346 = CARTESIAN_POINT('',(-1.25,-1.83,0.E+000)); +#2347 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2348 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2349 = ADVANCED_FACE('',(#2350),#2377,.F.); +#2350 = FACE_BOUND('',#2351,.F.); +#2351 = EDGE_LOOP('',(#2352,#2360,#2361,#2362,#2363,#2371)); +#2352 = ORIENTED_EDGE('',*,*,#2353,.F.); +#2353 = EDGE_CURVE('',#2290,#2354,#2356,.T.); +#2354 = VERTEX_POINT('',#2355); +#2355 = CARTESIAN_POINT('',(1.5,-2.07,0.E+000)); +#2356 = LINE('',#2357,#2358); +#2357 = CARTESIAN_POINT('',(1.25,-2.07,0.E+000)); +#2358 = VECTOR('',#2359,1.); +#2359 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2360 = ORIENTED_EDGE('',*,*,#2299,.T.); +#2361 = ORIENTED_EDGE('',*,*,#455,.F.); +#2362 = ORIENTED_EDGE('',*,*,#708,.T.); +#2363 = ORIENTED_EDGE('',*,*,#2364,.T.); +#2364 = EDGE_CURVE('',#709,#2365,#2367,.T.); +#2365 = VERTEX_POINT('',#2366); +#2366 = CARTESIAN_POINT('',(1.5,-2.07,0.2)); +#2367 = LINE('',#2368,#2369); +#2368 = CARTESIAN_POINT('',(1.25,-2.07,0.2)); +#2369 = VECTOR('',#2370,1.); +#2370 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2371 = ORIENTED_EDGE('',*,*,#2372,.F.); +#2372 = EDGE_CURVE('',#2354,#2365,#2373,.T.); +#2373 = LINE('',#2374,#2375); +#2374 = CARTESIAN_POINT('',(1.5,-2.07,0.E+000)); +#2375 = VECTOR('',#2376,1.); +#2376 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2377 = PLANE('',#2378); +#2378 = AXIS2_PLACEMENT_3D('',#2379,#2380,#2381); +#2379 = CARTESIAN_POINT('',(1.25,-2.07,0.E+000)); +#2380 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2381 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2382 = ADVANCED_FACE('',(#2383),#2401,.F.); +#2383 = FACE_BOUND('',#2384,.F.); +#2384 = EDGE_LOOP('',(#2385,#2393,#2399,#2400)); +#2385 = ORIENTED_EDGE('',*,*,#2386,.F.); +#2386 = EDGE_CURVE('',#2387,#2314,#2389,.T.); +#2387 = VERTEX_POINT('',#2388); +#2388 = CARTESIAN_POINT('',(-1.25,-2.07,0.E+000)); +#2389 = LINE('',#2390,#2391); +#2390 = CARTESIAN_POINT('',(-1.25,-2.07,0.E+000)); +#2391 = VECTOR('',#2392,1.); +#2392 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2393 = ORIENTED_EDGE('',*,*,#2394,.T.); +#2394 = EDGE_CURVE('',#2387,#416,#2395,.T.); +#2395 = LINE('',#2396,#2397); +#2396 = CARTESIAN_POINT('',(-1.25,-2.07,0.E+000)); +#2397 = VECTOR('',#2398,1.); +#2398 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2399 = ORIENTED_EDGE('',*,*,#415,.F.); +#2400 = ORIENTED_EDGE('',*,*,#2323,.F.); +#2401 = PLANE('',#2402); +#2402 = AXIS2_PLACEMENT_3D('',#2403,#2404,#2405); +#2403 = CARTESIAN_POINT('',(-1.25,-2.07,0.E+000)); +#2404 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2405 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2406 = ADVANCED_FACE('',(#2407),#2434,.F.); +#2407 = FACE_BOUND('',#2408,.F.); +#2408 = EDGE_LOOP('',(#2409,#2417,#2425,#2431,#2432,#2433)); +#2409 = ORIENTED_EDGE('',*,*,#2410,.F.); +#2410 = EDGE_CURVE('',#2411,#2387,#2413,.T.); +#2411 = VERTEX_POINT('',#2412); +#2412 = CARTESIAN_POINT('',(-1.5,-2.07,0.E+000)); +#2413 = LINE('',#2414,#2415); +#2414 = CARTESIAN_POINT('',(-1.5,-2.07,0.E+000)); +#2415 = VECTOR('',#2416,1.); +#2416 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2417 = ORIENTED_EDGE('',*,*,#2418,.T.); +#2418 = EDGE_CURVE('',#2411,#2419,#2421,.T.); +#2419 = VERTEX_POINT('',#2420); +#2420 = CARTESIAN_POINT('',(-1.5,-2.07,0.2)); +#2421 = LINE('',#2422,#2423); +#2422 = CARTESIAN_POINT('',(-1.5,-2.07,0.E+000)); +#2423 = VECTOR('',#2424,1.); +#2424 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2425 = ORIENTED_EDGE('',*,*,#2426,.T.); +#2426 = EDGE_CURVE('',#2419,#958,#2427,.T.); +#2427 = LINE('',#2428,#2429); +#2428 = CARTESIAN_POINT('',(-1.5,-2.07,0.2)); +#2429 = VECTOR('',#2430,1.); +#2430 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2431 = ORIENTED_EDGE('',*,*,#957,.F.); +#2432 = ORIENTED_EDGE('',*,*,#423,.F.); +#2433 = ORIENTED_EDGE('',*,*,#2394,.F.); +#2434 = PLANE('',#2435); +#2435 = AXIS2_PLACEMENT_3D('',#2436,#2437,#2438); +#2436 = CARTESIAN_POINT('',(-1.5,-2.07,0.E+000)); +#2437 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2438 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2439 = ADVANCED_FACE('',(#2440),#2451,.T.); +#2440 = FACE_BOUND('',#2441,.T.); +#2441 = EDGE_LOOP('',(#2442,#2443,#2444,#2445)); +#2442 = ORIENTED_EDGE('',*,*,#950,.F.); +#2443 = ORIENTED_EDGE('',*,*,#439,.T.); +#2444 = ORIENTED_EDGE('',*,*,#701,.T.); +#2445 = ORIENTED_EDGE('',*,*,#2446,.F.); +#2446 = EDGE_CURVE('',#943,#694,#2447,.T.); +#2447 = LINE('',#2448,#2449); +#2448 = CARTESIAN_POINT('',(-1.45,-2.2,0.6)); +#2449 = VECTOR('',#2450,1.); +#2450 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#2451 = PLANE('',#2452); +#2452 = AXIS2_PLACEMENT_3D('',#2453,#2454,#2455); +#2453 = CARTESIAN_POINT('',(-1.45,-2.2,1.E-001)); +#2454 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2455 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2456 = ADVANCED_FACE('',(#2457,#2463),#2474,.T.); +#2457 = FACE_BOUND('',#2458,.T.); +#2458 = EDGE_LOOP('',(#2459,#2460,#2461,#2462)); +#2459 = ORIENTED_EDGE('',*,*,#886,.F.); +#2460 = ORIENTED_EDGE('',*,*,#942,.T.); +#2461 = ORIENTED_EDGE('',*,*,#2446,.T.); +#2462 = ORIENTED_EDGE('',*,*,#693,.F.); +#2463 = FACE_BOUND('',#2464,.T.); +#2464 = EDGE_LOOP('',(#2465)); +#2465 = ORIENTED_EDGE('',*,*,#2466,.T.); +#2466 = EDGE_CURVE('',#2467,#2467,#2469,.T.); +#2467 = VERTEX_POINT('',#2468); +#2468 = CARTESIAN_POINT('',(-1.,1.65,0.6)); +#2469 = CIRCLE('',#2470,0.1); +#2470 = AXIS2_PLACEMENT_3D('',#2471,#2472,#2473); +#2471 = CARTESIAN_POINT('',(-1.,1.75,0.6)); +#2472 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#2473 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2474 = PLANE('',#2475); +#2475 = AXIS2_PLACEMENT_3D('',#2476,#2477,#2478); +#2476 = CARTESIAN_POINT('',(-1.45,2.2,0.6)); +#2477 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2478 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2479 = ADVANCED_FACE('',(#2480),#2491,.T.); +#2480 = FACE_BOUND('',#2481,.T.); +#2481 = EDGE_LOOP('',(#2482,#2488,#2489,#2490)); +#2482 = ORIENTED_EDGE('',*,*,#2483,.T.); +#2483 = EDGE_CURVE('',#1201,#911,#2484,.T.); +#2484 = LINE('',#2485,#2486); +#2485 = CARTESIAN_POINT('',(1.5,1.83,0.2)); +#2486 = VECTOR('',#2487,1.); +#2487 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2488 = ORIENTED_EDGE('',*,*,#918,.T.); +#2489 = ORIENTED_EDGE('',*,*,#854,.T.); +#2490 = ORIENTED_EDGE('',*,*,#1200,.T.); +#2491 = PLANE('',#2492); +#2492 = AXIS2_PLACEMENT_3D('',#2493,#2494,#2495); +#2493 = CARTESIAN_POINT('',(1.375,1.95,0.2)); +#2494 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2495 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2496 = ADVANCED_FACE('',(#2497),#2508,.T.); +#2497 = FACE_BOUND('',#2498,.T.); +#2498 = EDGE_LOOP('',(#2499,#2505,#2506,#2507)); +#2499 = ORIENTED_EDGE('',*,*,#2500,.T.); +#2500 = EDGE_CURVE('',#2365,#2260,#2501,.T.); +#2501 = LINE('',#2502,#2503); +#2502 = CARTESIAN_POINT('',(1.5,-2.07,0.2)); +#2503 = VECTOR('',#2504,1.); +#2504 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2505 = ORIENTED_EDGE('',*,*,#2267,.T.); +#2506 = ORIENTED_EDGE('',*,*,#716,.T.); +#2507 = ORIENTED_EDGE('',*,*,#2364,.T.); +#2508 = PLANE('',#2509); +#2509 = AXIS2_PLACEMENT_3D('',#2510,#2511,#2512); +#2510 = CARTESIAN_POINT('',(1.375,-1.95,0.2)); +#2511 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2512 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2513 = ADVANCED_FACE('',(#2514),#2525,.T.); +#2514 = FACE_BOUND('',#2515,.T.); +#2515 = EDGE_LOOP('',(#2516,#2522,#2523,#2524)); +#2516 = ORIENTED_EDGE('',*,*,#2517,.T.); +#2517 = EDGE_CURVE('',#1395,#1290,#2518,.T.); +#2518 = LINE('',#2519,#2520); +#2519 = CARTESIAN_POINT('',(1.5,1.18,0.2)); +#2520 = VECTOR('',#2521,1.); +#2521 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2522 = ORIENTED_EDGE('',*,*,#1297,.T.); +#2523 = ORIENTED_EDGE('',*,*,#831,.T.); +#2524 = ORIENTED_EDGE('',*,*,#1394,.T.); +#2525 = PLANE('',#2526); +#2526 = AXIS2_PLACEMENT_3D('',#2527,#2528,#2529); +#2527 = CARTESIAN_POINT('',(1.375,1.3,0.2)); +#2528 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2529 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2530 = ADVANCED_FACE('',(#2531),#2542,.T.); +#2531 = FACE_BOUND('',#2532,.T.); +#2532 = EDGE_LOOP('',(#2533,#2539,#2540,#2541)); +#2533 = ORIENTED_EDGE('',*,*,#2534,.T.); +#2534 = EDGE_CURVE('',#2171,#2066,#2535,.T.); +#2535 = LINE('',#2536,#2537); +#2536 = CARTESIAN_POINT('',(1.5,-1.42,0.2)); +#2537 = VECTOR('',#2538,1.); +#2538 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2539 = ORIENTED_EDGE('',*,*,#2073,.T.); +#2540 = ORIENTED_EDGE('',*,*,#739,.T.); +#2541 = ORIENTED_EDGE('',*,*,#2170,.T.); +#2542 = PLANE('',#2543); +#2543 = AXIS2_PLACEMENT_3D('',#2544,#2545,#2546); +#2544 = CARTESIAN_POINT('',(1.375,-1.3,0.2)); +#2545 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2546 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2547 = ADVANCED_FACE('',(#2548),#2559,.T.); +#2548 = FACE_BOUND('',#2549,.T.); +#2549 = EDGE_LOOP('',(#2550,#2556,#2557,#2558)); +#2550 = ORIENTED_EDGE('',*,*,#2551,.T.); +#2551 = EDGE_CURVE('',#1589,#1484,#2552,.T.); +#2552 = LINE('',#2553,#2554); +#2553 = CARTESIAN_POINT('',(1.5,0.53,0.2)); +#2554 = VECTOR('',#2555,1.); +#2555 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2556 = ORIENTED_EDGE('',*,*,#1491,.T.); +#2557 = ORIENTED_EDGE('',*,*,#808,.T.); +#2558 = ORIENTED_EDGE('',*,*,#1588,.T.); +#2559 = PLANE('',#2560); +#2560 = AXIS2_PLACEMENT_3D('',#2561,#2562,#2563); +#2561 = CARTESIAN_POINT('',(1.375,0.65,0.2)); +#2562 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2563 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2564 = ADVANCED_FACE('',(#2565),#2576,.T.); +#2565 = FACE_BOUND('',#2566,.T.); +#2566 = EDGE_LOOP('',(#2567,#2573,#2574,#2575)); +#2567 = ORIENTED_EDGE('',*,*,#2568,.T.); +#2568 = EDGE_CURVE('',#1977,#1872,#2569,.T.); +#2569 = LINE('',#2570,#2571); +#2570 = CARTESIAN_POINT('',(1.5,-0.77,0.2)); +#2571 = VECTOR('',#2572,1.); +#2572 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2573 = ORIENTED_EDGE('',*,*,#1879,.T.); +#2574 = ORIENTED_EDGE('',*,*,#762,.T.); +#2575 = ORIENTED_EDGE('',*,*,#1976,.T.); +#2576 = PLANE('',#2577); +#2577 = AXIS2_PLACEMENT_3D('',#2578,#2579,#2580); +#2578 = CARTESIAN_POINT('',(1.375,-0.65,0.2)); +#2579 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2580 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2581 = ADVANCED_FACE('',(#2582),#2593,.T.); +#2582 = FACE_BOUND('',#2583,.T.); +#2583 = EDGE_LOOP('',(#2584,#2590,#2591,#2592)); +#2584 = ORIENTED_EDGE('',*,*,#2585,.T.); +#2585 = EDGE_CURVE('',#1783,#1678,#2586,.T.); +#2586 = LINE('',#2587,#2588); +#2587 = CARTESIAN_POINT('',(1.5,-0.12,0.2)); +#2588 = VECTOR('',#2589,1.); +#2589 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2590 = ORIENTED_EDGE('',*,*,#1685,.T.); +#2591 = ORIENTED_EDGE('',*,*,#785,.T.); +#2592 = ORIENTED_EDGE('',*,*,#1782,.T.); +#2593 = PLANE('',#2594); +#2594 = AXIS2_PLACEMENT_3D('',#2595,#2596,#2597); +#2595 = CARTESIAN_POINT('',(1.375,-2.914335439641E-016,0.2)); +#2596 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2597 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2598 = ADVANCED_FACE('',(#2599),#2610,.F.); +#2599 = FACE_BOUND('',#2600,.F.); +#2600 = EDGE_LOOP('',(#2601,#2602,#2603,#2604)); +#2601 = ORIENTED_EDGE('',*,*,#900,.T.); +#2602 = ORIENTED_EDGE('',*,*,#1125,.T.); +#2603 = ORIENTED_EDGE('',*,*,#1189,.T.); +#2604 = ORIENTED_EDGE('',*,*,#2605,.T.); +#2605 = EDGE_CURVE('',#1190,#901,#2606,.T.); +#2606 = LINE('',#2607,#2608); +#2607 = CARTESIAN_POINT('',(1.5,1.83,0.E+000)); +#2608 = VECTOR('',#2609,1.); +#2609 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2610 = PLANE('',#2611); +#2611 = AXIS2_PLACEMENT_3D('',#2612,#2613,#2614); +#2612 = CARTESIAN_POINT('',(1.375,1.95,0.E+000)); +#2613 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2614 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2615 = ADVANCED_FACE('',(#2616),#2622,.F.); +#2616 = FACE_BOUND('',#2617,.F.); +#2617 = EDGE_LOOP('',(#2618,#2619,#2620,#2621)); +#2618 = ORIENTED_EDGE('',*,*,#1208,.T.); +#2619 = ORIENTED_EDGE('',*,*,#2483,.T.); +#2620 = ORIENTED_EDGE('',*,*,#910,.F.); +#2621 = ORIENTED_EDGE('',*,*,#2605,.F.); +#2622 = PLANE('',#2623); +#2623 = AXIS2_PLACEMENT_3D('',#2624,#2625,#2626); +#2624 = CARTESIAN_POINT('',(1.5,1.83,0.E+000)); +#2625 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2626 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2627 = ADVANCED_FACE('',(#2628),#2639,.T.); +#2628 = FACE_BOUND('',#2629,.T.); +#2629 = EDGE_LOOP('',(#2630,#2636,#2637,#2638)); +#2630 = ORIENTED_EDGE('',*,*,#2631,.T.); +#2631 = EDGE_CURVE('',#1168,#1255,#2632,.T.); +#2632 = LINE('',#2633,#2634); +#2633 = CARTESIAN_POINT('',(-1.5,2.07,0.2)); +#2634 = VECTOR('',#2635,1.); +#2635 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2636 = ORIENTED_EDGE('',*,*,#1262,.T.); +#2637 = ORIENTED_EDGE('',*,*,#1103,.F.); +#2638 = ORIENTED_EDGE('',*,*,#1167,.T.); +#2639 = PLANE('',#2640); +#2640 = AXIS2_PLACEMENT_3D('',#2641,#2642,#2643); +#2641 = CARTESIAN_POINT('',(-1.375,1.95,0.2)); +#2642 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2643 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2644 = ADVANCED_FACE('',(#2645),#2656,.T.); +#2645 = FACE_BOUND('',#2646,.T.); +#2646 = EDGE_LOOP('',(#2647,#2653,#2654,#2655)); +#2647 = ORIENTED_EDGE('',*,*,#2648,.T.); +#2648 = EDGE_CURVE('',#2332,#2419,#2649,.T.); +#2649 = LINE('',#2650,#2651); +#2650 = CARTESIAN_POINT('',(-1.5,-1.83,0.2)); +#2651 = VECTOR('',#2652,1.); +#2652 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2653 = ORIENTED_EDGE('',*,*,#2426,.T.); +#2654 = ORIENTED_EDGE('',*,*,#965,.F.); +#2655 = ORIENTED_EDGE('',*,*,#2331,.T.); +#2656 = PLANE('',#2657); +#2657 = AXIS2_PLACEMENT_3D('',#2658,#2659,#2660); +#2658 = CARTESIAN_POINT('',(-1.375,-1.95,0.2)); +#2659 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2660 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2661 = ADVANCED_FACE('',(#2662),#2673,.T.); +#2662 = FACE_BOUND('',#2663,.T.); +#2663 = EDGE_LOOP('',(#2664,#2670,#2671,#2672)); +#2664 = ORIENTED_EDGE('',*,*,#2665,.T.); +#2665 = EDGE_CURVE('',#1362,#1449,#2666,.T.); +#2666 = LINE('',#2667,#2668); +#2667 = CARTESIAN_POINT('',(-1.5,1.42,0.2)); +#2668 = VECTOR('',#2669,1.); +#2669 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2670 = ORIENTED_EDGE('',*,*,#1456,.T.); +#2671 = ORIENTED_EDGE('',*,*,#1080,.F.); +#2672 = ORIENTED_EDGE('',*,*,#1361,.T.); +#2673 = PLANE('',#2674); +#2674 = AXIS2_PLACEMENT_3D('',#2675,#2676,#2677); +#2675 = CARTESIAN_POINT('',(-1.375,1.3,0.2)); +#2676 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2677 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2678 = ADVANCED_FACE('',(#2679),#2690,.T.); +#2679 = FACE_BOUND('',#2680,.T.); +#2680 = EDGE_LOOP('',(#2681,#2687,#2688,#2689)); +#2681 = ORIENTED_EDGE('',*,*,#2682,.T.); +#2682 = EDGE_CURVE('',#2138,#2225,#2683,.T.); +#2683 = LINE('',#2684,#2685); +#2684 = CARTESIAN_POINT('',(-1.5,-1.18,0.2)); +#2685 = VECTOR('',#2686,1.); +#2686 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2687 = ORIENTED_EDGE('',*,*,#2232,.T.); +#2688 = ORIENTED_EDGE('',*,*,#988,.F.); +#2689 = ORIENTED_EDGE('',*,*,#2137,.T.); +#2690 = PLANE('',#2691); +#2691 = AXIS2_PLACEMENT_3D('',#2692,#2693,#2694); +#2692 = CARTESIAN_POINT('',(-1.375,-1.3,0.2)); +#2693 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2694 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2695 = ADVANCED_FACE('',(#2696),#2707,.T.); +#2696 = FACE_BOUND('',#2697,.T.); +#2697 = EDGE_LOOP('',(#2698,#2704,#2705,#2706)); +#2698 = ORIENTED_EDGE('',*,*,#2699,.T.); +#2699 = EDGE_CURVE('',#1556,#1643,#2700,.T.); +#2700 = LINE('',#2701,#2702); +#2701 = CARTESIAN_POINT('',(-1.5,0.77,0.2)); +#2702 = VECTOR('',#2703,1.); +#2703 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2704 = ORIENTED_EDGE('',*,*,#1650,.T.); +#2705 = ORIENTED_EDGE('',*,*,#1057,.F.); +#2706 = ORIENTED_EDGE('',*,*,#1555,.T.); +#2707 = PLANE('',#2708); +#2708 = AXIS2_PLACEMENT_3D('',#2709,#2710,#2711); +#2709 = CARTESIAN_POINT('',(-1.375,0.65,0.2)); +#2710 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2711 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2712 = ADVANCED_FACE('',(#2713),#2724,.T.); +#2713 = FACE_BOUND('',#2714,.T.); +#2714 = EDGE_LOOP('',(#2715,#2721,#2722,#2723)); +#2715 = ORIENTED_EDGE('',*,*,#2716,.T.); +#2716 = EDGE_CURVE('',#1944,#2031,#2717,.T.); +#2717 = LINE('',#2718,#2719); +#2718 = CARTESIAN_POINT('',(-1.5,-0.53,0.2)); +#2719 = VECTOR('',#2720,1.); +#2720 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2721 = ORIENTED_EDGE('',*,*,#2038,.T.); +#2722 = ORIENTED_EDGE('',*,*,#1011,.F.); +#2723 = ORIENTED_EDGE('',*,*,#1943,.T.); +#2724 = PLANE('',#2725); +#2725 = AXIS2_PLACEMENT_3D('',#2726,#2727,#2728); +#2726 = CARTESIAN_POINT('',(-1.375,-0.65,0.2)); +#2727 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2728 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2729 = ADVANCED_FACE('',(#2730),#2741,.T.); +#2730 = FACE_BOUND('',#2731,.T.); +#2731 = EDGE_LOOP('',(#2732,#2738,#2739,#2740)); +#2732 = ORIENTED_EDGE('',*,*,#2733,.T.); +#2733 = EDGE_CURVE('',#1750,#1837,#2734,.T.); +#2734 = LINE('',#2735,#2736); +#2735 = CARTESIAN_POINT('',(-1.5,0.12,0.2)); +#2736 = VECTOR('',#2737,1.); +#2737 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2738 = ORIENTED_EDGE('',*,*,#1844,.T.); +#2739 = ORIENTED_EDGE('',*,*,#1034,.F.); +#2740 = ORIENTED_EDGE('',*,*,#1749,.T.); +#2741 = PLANE('',#2742); +#2742 = AXIS2_PLACEMENT_3D('',#2743,#2744,#2745); +#2743 = CARTESIAN_POINT('',(-1.375,4.579669976579E-016,0.2)); +#2744 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2745 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2746 = ADVANCED_FACE('',(#2747),#2758,.F.); +#2747 = FACE_BOUND('',#2748,.F.); +#2748 = EDGE_LOOP('',(#2749,#2750,#2751,#2752)); +#2749 = ORIENTED_EDGE('',*,*,#1246,.T.); +#2750 = ORIENTED_EDGE('',*,*,#1222,.T.); +#2751 = ORIENTED_EDGE('',*,*,#1149,.T.); +#2752 = ORIENTED_EDGE('',*,*,#2753,.T.); +#2753 = EDGE_CURVE('',#1152,#1247,#2754,.T.); +#2754 = LINE('',#2755,#2756); +#2755 = CARTESIAN_POINT('',(-1.5,2.07,0.E+000)); +#2756 = VECTOR('',#2757,1.); +#2757 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2758 = PLANE('',#2759); +#2759 = AXIS2_PLACEMENT_3D('',#2760,#2761,#2762); +#2760 = CARTESIAN_POINT('',(-1.375,1.95,0.E+000)); +#2761 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2762 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2763 = ADVANCED_FACE('',(#2764),#2770,.F.); +#2764 = FACE_BOUND('',#2765,.F.); +#2765 = EDGE_LOOP('',(#2766,#2767,#2768,#2769)); +#2766 = ORIENTED_EDGE('',*,*,#1175,.T.); +#2767 = ORIENTED_EDGE('',*,*,#2631,.T.); +#2768 = ORIENTED_EDGE('',*,*,#1254,.F.); +#2769 = ORIENTED_EDGE('',*,*,#2753,.F.); +#2770 = PLANE('',#2771); +#2771 = AXIS2_PLACEMENT_3D('',#2772,#2773,#2774); +#2772 = CARTESIAN_POINT('',(-1.5,2.07,0.E+000)); +#2773 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2774 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2775 = ADVANCED_FACE('',(#2776),#2787,.F.); +#2776 = FACE_BOUND('',#2777,.F.); +#2777 = EDGE_LOOP('',(#2778,#2779,#2780,#2781)); +#2778 = ORIENTED_EDGE('',*,*,#1279,.T.); +#2779 = ORIENTED_EDGE('',*,*,#1319,.T.); +#2780 = ORIENTED_EDGE('',*,*,#1383,.T.); +#2781 = ORIENTED_EDGE('',*,*,#2782,.T.); +#2782 = EDGE_CURVE('',#1384,#1280,#2783,.T.); +#2783 = LINE('',#2784,#2785); +#2784 = CARTESIAN_POINT('',(1.5,1.18,0.E+000)); +#2785 = VECTOR('',#2786,1.); +#2786 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2787 = PLANE('',#2788); +#2788 = AXIS2_PLACEMENT_3D('',#2789,#2790,#2791); +#2789 = CARTESIAN_POINT('',(1.375,1.3,0.E+000)); +#2790 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2791 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2792 = ADVANCED_FACE('',(#2793),#2799,.F.); +#2793 = FACE_BOUND('',#2794,.F.); +#2794 = EDGE_LOOP('',(#2795,#2796,#2797,#2798)); +#2795 = ORIENTED_EDGE('',*,*,#1402,.T.); +#2796 = ORIENTED_EDGE('',*,*,#2517,.T.); +#2797 = ORIENTED_EDGE('',*,*,#1289,.F.); +#2798 = ORIENTED_EDGE('',*,*,#2782,.F.); +#2799 = PLANE('',#2800); +#2800 = AXIS2_PLACEMENT_3D('',#2801,#2802,#2803); +#2801 = CARTESIAN_POINT('',(1.5,1.18,0.E+000)); +#2802 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2803 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2804 = ADVANCED_FACE('',(#2805),#2816,.F.); +#2805 = FACE_BOUND('',#2806,.F.); +#2806 = EDGE_LOOP('',(#2807,#2808,#2809,#2810)); +#2807 = ORIENTED_EDGE('',*,*,#1440,.T.); +#2808 = ORIENTED_EDGE('',*,*,#1416,.T.); +#2809 = ORIENTED_EDGE('',*,*,#1343,.T.); +#2810 = ORIENTED_EDGE('',*,*,#2811,.T.); +#2811 = EDGE_CURVE('',#1346,#1441,#2812,.T.); +#2812 = LINE('',#2813,#2814); +#2813 = CARTESIAN_POINT('',(-1.5,1.42,0.E+000)); +#2814 = VECTOR('',#2815,1.); +#2815 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2816 = PLANE('',#2817); +#2817 = AXIS2_PLACEMENT_3D('',#2818,#2819,#2820); +#2818 = CARTESIAN_POINT('',(-1.375,1.3,0.E+000)); +#2819 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2820 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2821 = ADVANCED_FACE('',(#2822),#2828,.F.); +#2822 = FACE_BOUND('',#2823,.F.); +#2823 = EDGE_LOOP('',(#2824,#2825,#2826,#2827)); +#2824 = ORIENTED_EDGE('',*,*,#1369,.T.); +#2825 = ORIENTED_EDGE('',*,*,#2665,.T.); +#2826 = ORIENTED_EDGE('',*,*,#1448,.F.); +#2827 = ORIENTED_EDGE('',*,*,#2811,.F.); +#2828 = PLANE('',#2829); +#2829 = AXIS2_PLACEMENT_3D('',#2830,#2831,#2832); +#2830 = CARTESIAN_POINT('',(-1.5,1.42,0.E+000)); +#2831 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2832 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2833 = ADVANCED_FACE('',(#2834),#2845,.F.); +#2834 = FACE_BOUND('',#2835,.F.); +#2835 = EDGE_LOOP('',(#2836,#2837,#2838,#2839)); +#2836 = ORIENTED_EDGE('',*,*,#1473,.T.); +#2837 = ORIENTED_EDGE('',*,*,#1513,.T.); +#2838 = ORIENTED_EDGE('',*,*,#1577,.T.); +#2839 = ORIENTED_EDGE('',*,*,#2840,.T.); +#2840 = EDGE_CURVE('',#1578,#1474,#2841,.T.); +#2841 = LINE('',#2842,#2843); +#2842 = CARTESIAN_POINT('',(1.5,0.53,0.E+000)); +#2843 = VECTOR('',#2844,1.); +#2844 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2845 = PLANE('',#2846); +#2846 = AXIS2_PLACEMENT_3D('',#2847,#2848,#2849); +#2847 = CARTESIAN_POINT('',(1.375,0.65,0.E+000)); +#2848 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2849 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2850 = ADVANCED_FACE('',(#2851),#2857,.F.); +#2851 = FACE_BOUND('',#2852,.F.); +#2852 = EDGE_LOOP('',(#2853,#2854,#2855,#2856)); +#2853 = ORIENTED_EDGE('',*,*,#1596,.T.); +#2854 = ORIENTED_EDGE('',*,*,#2551,.T.); +#2855 = ORIENTED_EDGE('',*,*,#1483,.F.); +#2856 = ORIENTED_EDGE('',*,*,#2840,.F.); +#2857 = PLANE('',#2858); +#2858 = AXIS2_PLACEMENT_3D('',#2859,#2860,#2861); +#2859 = CARTESIAN_POINT('',(1.5,0.53,0.E+000)); +#2860 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2861 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2862 = ADVANCED_FACE('',(#2863),#2874,.F.); +#2863 = FACE_BOUND('',#2864,.F.); +#2864 = EDGE_LOOP('',(#2865,#2866,#2867,#2868)); +#2865 = ORIENTED_EDGE('',*,*,#1634,.T.); +#2866 = ORIENTED_EDGE('',*,*,#1610,.T.); +#2867 = ORIENTED_EDGE('',*,*,#1537,.T.); +#2868 = ORIENTED_EDGE('',*,*,#2869,.T.); +#2869 = EDGE_CURVE('',#1540,#1635,#2870,.T.); +#2870 = LINE('',#2871,#2872); +#2871 = CARTESIAN_POINT('',(-1.5,0.77,0.E+000)); +#2872 = VECTOR('',#2873,1.); +#2873 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2874 = PLANE('',#2875); +#2875 = AXIS2_PLACEMENT_3D('',#2876,#2877,#2878); +#2876 = CARTESIAN_POINT('',(-1.375,0.65,0.E+000)); +#2877 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2878 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2879 = ADVANCED_FACE('',(#2880),#2886,.F.); +#2880 = FACE_BOUND('',#2881,.F.); +#2881 = EDGE_LOOP('',(#2882,#2883,#2884,#2885)); +#2882 = ORIENTED_EDGE('',*,*,#1563,.T.); +#2883 = ORIENTED_EDGE('',*,*,#2699,.T.); +#2884 = ORIENTED_EDGE('',*,*,#1642,.F.); +#2885 = ORIENTED_EDGE('',*,*,#2869,.F.); +#2886 = PLANE('',#2887); +#2887 = AXIS2_PLACEMENT_3D('',#2888,#2889,#2890); +#2888 = CARTESIAN_POINT('',(-1.5,0.77,0.E+000)); +#2889 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2890 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2891 = ADVANCED_FACE('',(#2892),#2903,.F.); +#2892 = FACE_BOUND('',#2893,.F.); +#2893 = EDGE_LOOP('',(#2894,#2895,#2896,#2897)); +#2894 = ORIENTED_EDGE('',*,*,#1667,.T.); +#2895 = ORIENTED_EDGE('',*,*,#1707,.T.); +#2896 = ORIENTED_EDGE('',*,*,#1771,.T.); +#2897 = ORIENTED_EDGE('',*,*,#2898,.T.); +#2898 = EDGE_CURVE('',#1772,#1668,#2899,.T.); +#2899 = LINE('',#2900,#2901); +#2900 = CARTESIAN_POINT('',(1.5,-0.12,0.E+000)); +#2901 = VECTOR('',#2902,1.); +#2902 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2903 = PLANE('',#2904); +#2904 = AXIS2_PLACEMENT_3D('',#2905,#2906,#2907); +#2905 = CARTESIAN_POINT('',(1.375,-2.914335439641E-016,0.E+000)); +#2906 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2907 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2908 = ADVANCED_FACE('',(#2909),#2915,.F.); +#2909 = FACE_BOUND('',#2910,.F.); +#2910 = EDGE_LOOP('',(#2911,#2912,#2913,#2914)); +#2911 = ORIENTED_EDGE('',*,*,#1790,.T.); +#2912 = ORIENTED_EDGE('',*,*,#2585,.T.); +#2913 = ORIENTED_EDGE('',*,*,#1677,.F.); +#2914 = ORIENTED_EDGE('',*,*,#2898,.F.); +#2915 = PLANE('',#2916); +#2916 = AXIS2_PLACEMENT_3D('',#2917,#2918,#2919); +#2917 = CARTESIAN_POINT('',(1.5,-0.12,0.E+000)); +#2918 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2919 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2920 = ADVANCED_FACE('',(#2921),#2932,.F.); +#2921 = FACE_BOUND('',#2922,.F.); +#2922 = EDGE_LOOP('',(#2923,#2924,#2925,#2926)); +#2923 = ORIENTED_EDGE('',*,*,#1828,.T.); +#2924 = ORIENTED_EDGE('',*,*,#1804,.T.); +#2925 = ORIENTED_EDGE('',*,*,#1731,.T.); +#2926 = ORIENTED_EDGE('',*,*,#2927,.T.); +#2927 = EDGE_CURVE('',#1734,#1829,#2928,.T.); +#2928 = LINE('',#2929,#2930); +#2929 = CARTESIAN_POINT('',(-1.5,0.12,0.E+000)); +#2930 = VECTOR('',#2931,1.); +#2931 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2932 = PLANE('',#2933); +#2933 = AXIS2_PLACEMENT_3D('',#2934,#2935,#2936); +#2934 = CARTESIAN_POINT('',(-1.375,4.579669976579E-016,0.E+000)); +#2935 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2936 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2937 = ADVANCED_FACE('',(#2938),#2944,.F.); +#2938 = FACE_BOUND('',#2939,.F.); +#2939 = EDGE_LOOP('',(#2940,#2941,#2942,#2943)); +#2940 = ORIENTED_EDGE('',*,*,#1757,.T.); +#2941 = ORIENTED_EDGE('',*,*,#2733,.T.); +#2942 = ORIENTED_EDGE('',*,*,#1836,.F.); +#2943 = ORIENTED_EDGE('',*,*,#2927,.F.); +#2944 = PLANE('',#2945); +#2945 = AXIS2_PLACEMENT_3D('',#2946,#2947,#2948); +#2946 = CARTESIAN_POINT('',(-1.5,0.12,0.E+000)); +#2947 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2948 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2949 = ADVANCED_FACE('',(#2950),#2961,.F.); +#2950 = FACE_BOUND('',#2951,.F.); +#2951 = EDGE_LOOP('',(#2952,#2953,#2954,#2955)); +#2952 = ORIENTED_EDGE('',*,*,#1861,.T.); +#2953 = ORIENTED_EDGE('',*,*,#1901,.T.); +#2954 = ORIENTED_EDGE('',*,*,#1965,.T.); +#2955 = ORIENTED_EDGE('',*,*,#2956,.T.); +#2956 = EDGE_CURVE('',#1966,#1862,#2957,.T.); +#2957 = LINE('',#2958,#2959); +#2958 = CARTESIAN_POINT('',(1.5,-0.77,0.E+000)); +#2959 = VECTOR('',#2960,1.); +#2960 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2961 = PLANE('',#2962); +#2962 = AXIS2_PLACEMENT_3D('',#2963,#2964,#2965); +#2963 = CARTESIAN_POINT('',(1.375,-0.65,0.E+000)); +#2964 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2965 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2966 = ADVANCED_FACE('',(#2967),#2973,.F.); +#2967 = FACE_BOUND('',#2968,.F.); +#2968 = EDGE_LOOP('',(#2969,#2970,#2971,#2972)); +#2969 = ORIENTED_EDGE('',*,*,#1984,.T.); +#2970 = ORIENTED_EDGE('',*,*,#2568,.T.); +#2971 = ORIENTED_EDGE('',*,*,#1871,.F.); +#2972 = ORIENTED_EDGE('',*,*,#2956,.F.); +#2973 = PLANE('',#2974); +#2974 = AXIS2_PLACEMENT_3D('',#2975,#2976,#2977); +#2975 = CARTESIAN_POINT('',(1.5,-0.77,0.E+000)); +#2976 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2977 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2978 = ADVANCED_FACE('',(#2979),#2990,.F.); +#2979 = FACE_BOUND('',#2980,.F.); +#2980 = EDGE_LOOP('',(#2981,#2982,#2983,#2984)); +#2981 = ORIENTED_EDGE('',*,*,#2022,.T.); +#2982 = ORIENTED_EDGE('',*,*,#1998,.T.); +#2983 = ORIENTED_EDGE('',*,*,#1925,.T.); +#2984 = ORIENTED_EDGE('',*,*,#2985,.T.); +#2985 = EDGE_CURVE('',#1928,#2023,#2986,.T.); +#2986 = LINE('',#2987,#2988); +#2987 = CARTESIAN_POINT('',(-1.5,-0.53,0.E+000)); +#2988 = VECTOR('',#2989,1.); +#2989 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2990 = PLANE('',#2991); +#2991 = AXIS2_PLACEMENT_3D('',#2992,#2993,#2994); +#2992 = CARTESIAN_POINT('',(-1.375,-0.65,0.E+000)); +#2993 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2994 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2995 = ADVANCED_FACE('',(#2996),#3002,.F.); +#2996 = FACE_BOUND('',#2997,.F.); +#2997 = EDGE_LOOP('',(#2998,#2999,#3000,#3001)); +#2998 = ORIENTED_EDGE('',*,*,#1951,.T.); +#2999 = ORIENTED_EDGE('',*,*,#2716,.T.); +#3000 = ORIENTED_EDGE('',*,*,#2030,.F.); +#3001 = ORIENTED_EDGE('',*,*,#2985,.F.); +#3002 = PLANE('',#3003); +#3003 = AXIS2_PLACEMENT_3D('',#3004,#3005,#3006); +#3004 = CARTESIAN_POINT('',(-1.5,-0.53,0.E+000)); +#3005 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#3006 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3007 = ADVANCED_FACE('',(#3008),#3019,.F.); +#3008 = FACE_BOUND('',#3009,.F.); +#3009 = EDGE_LOOP('',(#3010,#3011,#3012,#3013)); +#3010 = ORIENTED_EDGE('',*,*,#2055,.T.); +#3011 = ORIENTED_EDGE('',*,*,#2095,.T.); +#3012 = ORIENTED_EDGE('',*,*,#2159,.T.); +#3013 = ORIENTED_EDGE('',*,*,#3014,.T.); +#3014 = EDGE_CURVE('',#2160,#2056,#3015,.T.); +#3015 = LINE('',#3016,#3017); +#3016 = CARTESIAN_POINT('',(1.5,-1.42,0.E+000)); +#3017 = VECTOR('',#3018,1.); +#3018 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3019 = PLANE('',#3020); +#3020 = AXIS2_PLACEMENT_3D('',#3021,#3022,#3023); +#3021 = CARTESIAN_POINT('',(1.375,-1.3,0.E+000)); +#3022 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3023 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3024 = ADVANCED_FACE('',(#3025),#3031,.F.); +#3025 = FACE_BOUND('',#3026,.F.); +#3026 = EDGE_LOOP('',(#3027,#3028,#3029,#3030)); +#3027 = ORIENTED_EDGE('',*,*,#2178,.T.); +#3028 = ORIENTED_EDGE('',*,*,#2534,.T.); +#3029 = ORIENTED_EDGE('',*,*,#2065,.F.); +#3030 = ORIENTED_EDGE('',*,*,#3014,.F.); +#3031 = PLANE('',#3032); +#3032 = AXIS2_PLACEMENT_3D('',#3033,#3034,#3035); +#3033 = CARTESIAN_POINT('',(1.5,-1.42,0.E+000)); +#3034 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#3035 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3036 = ADVANCED_FACE('',(#3037),#3048,.F.); +#3037 = FACE_BOUND('',#3038,.F.); +#3038 = EDGE_LOOP('',(#3039,#3040,#3041,#3042)); +#3039 = ORIENTED_EDGE('',*,*,#2216,.T.); +#3040 = ORIENTED_EDGE('',*,*,#2192,.T.); +#3041 = ORIENTED_EDGE('',*,*,#2119,.T.); +#3042 = ORIENTED_EDGE('',*,*,#3043,.T.); +#3043 = EDGE_CURVE('',#2122,#2217,#3044,.T.); +#3044 = LINE('',#3045,#3046); +#3045 = CARTESIAN_POINT('',(-1.5,-1.18,0.E+000)); +#3046 = VECTOR('',#3047,1.); +#3047 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3048 = PLANE('',#3049); +#3049 = AXIS2_PLACEMENT_3D('',#3050,#3051,#3052); +#3050 = CARTESIAN_POINT('',(-1.375,-1.3,0.E+000)); +#3051 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3052 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3053 = ADVANCED_FACE('',(#3054),#3060,.F.); +#3054 = FACE_BOUND('',#3055,.F.); +#3055 = EDGE_LOOP('',(#3056,#3057,#3058,#3059)); +#3056 = ORIENTED_EDGE('',*,*,#2145,.T.); +#3057 = ORIENTED_EDGE('',*,*,#2682,.T.); +#3058 = ORIENTED_EDGE('',*,*,#2224,.F.); +#3059 = ORIENTED_EDGE('',*,*,#3043,.F.); +#3060 = PLANE('',#3061); +#3061 = AXIS2_PLACEMENT_3D('',#3062,#3063,#3064); +#3062 = CARTESIAN_POINT('',(-1.5,-1.18,0.E+000)); +#3063 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#3064 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3065 = ADVANCED_FACE('',(#3066),#3077,.F.); +#3066 = FACE_BOUND('',#3067,.F.); +#3067 = EDGE_LOOP('',(#3068,#3069,#3070,#3071)); +#3068 = ORIENTED_EDGE('',*,*,#2249,.T.); +#3069 = ORIENTED_EDGE('',*,*,#2289,.T.); +#3070 = ORIENTED_EDGE('',*,*,#2353,.T.); +#3071 = ORIENTED_EDGE('',*,*,#3072,.T.); +#3072 = EDGE_CURVE('',#2354,#2250,#3073,.T.); +#3073 = LINE('',#3074,#3075); +#3074 = CARTESIAN_POINT('',(1.5,-2.07,0.E+000)); +#3075 = VECTOR('',#3076,1.); +#3076 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3077 = PLANE('',#3078); +#3078 = AXIS2_PLACEMENT_3D('',#3079,#3080,#3081); +#3079 = CARTESIAN_POINT('',(1.375,-1.95,0.E+000)); +#3080 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3081 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3082 = ADVANCED_FACE('',(#3083),#3089,.F.); +#3083 = FACE_BOUND('',#3084,.F.); +#3084 = EDGE_LOOP('',(#3085,#3086,#3087,#3088)); +#3085 = ORIENTED_EDGE('',*,*,#2372,.T.); +#3086 = ORIENTED_EDGE('',*,*,#2500,.T.); +#3087 = ORIENTED_EDGE('',*,*,#2259,.F.); +#3088 = ORIENTED_EDGE('',*,*,#3072,.F.); +#3089 = PLANE('',#3090); +#3090 = AXIS2_PLACEMENT_3D('',#3091,#3092,#3093); +#3091 = CARTESIAN_POINT('',(1.5,-2.07,0.E+000)); +#3092 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#3093 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3094 = ADVANCED_FACE('',(#3095),#3106,.F.); +#3095 = FACE_BOUND('',#3096,.F.); +#3096 = EDGE_LOOP('',(#3097,#3098,#3099,#3100)); +#3097 = ORIENTED_EDGE('',*,*,#2410,.T.); +#3098 = ORIENTED_EDGE('',*,*,#2386,.T.); +#3099 = ORIENTED_EDGE('',*,*,#2313,.T.); +#3100 = ORIENTED_EDGE('',*,*,#3101,.T.); +#3101 = EDGE_CURVE('',#2316,#2411,#3102,.T.); +#3102 = LINE('',#3103,#3104); +#3103 = CARTESIAN_POINT('',(-1.5,-1.83,0.E+000)); +#3104 = VECTOR('',#3105,1.); +#3105 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3106 = PLANE('',#3107); +#3107 = AXIS2_PLACEMENT_3D('',#3108,#3109,#3110); +#3108 = CARTESIAN_POINT('',(-1.375,-1.95,0.E+000)); +#3109 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3110 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3111 = ADVANCED_FACE('',(#3112),#3118,.F.); +#3112 = FACE_BOUND('',#3113,.F.); +#3113 = EDGE_LOOP('',(#3114,#3115,#3116,#3117)); +#3114 = ORIENTED_EDGE('',*,*,#2339,.T.); +#3115 = ORIENTED_EDGE('',*,*,#2648,.T.); +#3116 = ORIENTED_EDGE('',*,*,#2418,.F.); +#3117 = ORIENTED_EDGE('',*,*,#3101,.F.); +#3118 = PLANE('',#3119); +#3119 = AXIS2_PLACEMENT_3D('',#3120,#3121,#3122); +#3120 = CARTESIAN_POINT('',(-1.5,-1.83,0.E+000)); +#3121 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#3122 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3123 = ADVANCED_FACE('',(#3124),#3143,.F.); +#3124 = FACE_BOUND('',#3125,.T.); +#3125 = EDGE_LOOP('',(#3126,#3127,#3135,#3142)); +#3126 = ORIENTED_EDGE('',*,*,#2466,.F.); +#3127 = ORIENTED_EDGE('',*,*,#3128,.T.); +#3128 = EDGE_CURVE('',#2467,#3129,#3131,.T.); +#3129 = VERTEX_POINT('',#3130); +#3130 = CARTESIAN_POINT('',(-1.,1.65,0.5)); +#3131 = LINE('',#3132,#3133); +#3132 = CARTESIAN_POINT('',(-1.,1.65,0.7)); +#3133 = VECTOR('',#3134,1.); +#3134 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#3135 = ORIENTED_EDGE('',*,*,#3136,.F.); +#3136 = EDGE_CURVE('',#3129,#3129,#3137,.T.); +#3137 = CIRCLE('',#3138,0.1); +#3138 = AXIS2_PLACEMENT_3D('',#3139,#3140,#3141); +#3139 = CARTESIAN_POINT('',(-1.,1.75,0.5)); +#3140 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3141 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#3142 = ORIENTED_EDGE('',*,*,#3128,.F.); +#3143 = CYLINDRICAL_SURFACE('',#3144,0.1); +#3144 = AXIS2_PLACEMENT_3D('',#3145,#3146,#3147); +#3145 = CARTESIAN_POINT('',(-1.,1.75,0.7)); +#3146 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#3147 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#3148 = ADVANCED_FACE('',(#3149),#3152,.T.); +#3149 = FACE_BOUND('',#3150,.T.); +#3150 = EDGE_LOOP('',(#3151)); +#3151 = ORIENTED_EDGE('',*,*,#3136,.T.); +#3152 = PLANE('',#3153); +#3153 = AXIS2_PLACEMENT_3D('',#3154,#3155,#3156); +#3154 = CARTESIAN_POINT('',(-1.,1.75,0.5)); +#3155 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3156 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#3157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3161)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#3158,#3159,#3160)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#3158 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#3159 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#3160 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#3161 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-007),#3158, +'distance_accuracy_value','confusion accuracy'); +#3162 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#3163 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( +#3164,#3172,#3179,#3186,#3193,#3200,#3207,#3215,#3222,#3229,#3236, +#3243,#3250,#3257,#3264,#3271,#3278,#3285,#3292,#3299,#3306,#3313, +#3320,#3327,#3334,#3341,#3348,#3355,#3362,#3369,#3376,#3383,#3390, +#3397,#3404,#3411,#3418,#3425,#3432,#3439,#3446,#3453,#3460,#3467, +#3474,#3481,#3488,#3495,#3502,#3509,#3516,#3523,#3530,#3537,#3544, +#3551,#3558,#3565,#3572,#3579,#3586,#3593,#3600,#3607,#3614,#3621, +#3628,#3635,#3642,#3649,#3656,#3663,#3670,#3677,#3684,#3691,#3698, +#3705,#3712,#3719,#3726,#3733,#3740,#3747,#3754,#3761,#3768,#3775, +#3782,#3789,#3796,#3803,#3810,#3817,#3824,#3831,#3838,#3846),#3157); +#3164 = STYLED_ITEM('color',(#3165),#17); +#3165 = PRESENTATION_STYLE_ASSIGNMENT((#3166)); +#3166 = SURFACE_STYLE_USAGE(.BOTH.,#3167); +#3167 = SURFACE_SIDE_STYLE('',(#3168)); +#3168 = SURFACE_STYLE_FILL_AREA(#3169); +#3169 = FILL_AREA_STYLE('',(#3170)); +#3170 = FILL_AREA_STYLE_COLOUR('',#3171); +#3171 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#3172 = STYLED_ITEM('color',(#3173),#65); +#3173 = PRESENTATION_STYLE_ASSIGNMENT((#3174)); +#3174 = SURFACE_STYLE_USAGE(.BOTH.,#3175); +#3175 = SURFACE_SIDE_STYLE('',(#3176)); +#3176 = SURFACE_STYLE_FILL_AREA(#3177); +#3177 = FILL_AREA_STYLE('',(#3178)); +#3178 = FILL_AREA_STYLE_COLOUR('',#3171); +#3179 = STYLED_ITEM('color',(#3180),#96); +#3180 = PRESENTATION_STYLE_ASSIGNMENT((#3181)); +#3181 = SURFACE_STYLE_USAGE(.BOTH.,#3182); +#3182 = SURFACE_SIDE_STYLE('',(#3183)); +#3183 = SURFACE_STYLE_FILL_AREA(#3184); +#3184 = FILL_AREA_STYLE('',(#3185)); +#3185 = FILL_AREA_STYLE_COLOUR('',#3171); +#3186 = STYLED_ITEM('color',(#3187),#120); +#3187 = PRESENTATION_STYLE_ASSIGNMENT((#3188)); +#3188 = SURFACE_STYLE_USAGE(.BOTH.,#3189); +#3189 = SURFACE_SIDE_STYLE('',(#3190)); +#3190 = SURFACE_STYLE_FILL_AREA(#3191); +#3191 = FILL_AREA_STYLE('',(#3192)); +#3192 = FILL_AREA_STYLE_COLOUR('',#3171); +#3193 = STYLED_ITEM('color',(#3194),#144); +#3194 = PRESENTATION_STYLE_ASSIGNMENT((#3195)); +#3195 = SURFACE_STYLE_USAGE(.BOTH.,#3196); +#3196 = SURFACE_SIDE_STYLE('',(#3197)); +#3197 = SURFACE_STYLE_FILL_AREA(#3198); +#3198 = FILL_AREA_STYLE('',(#3199)); +#3199 = FILL_AREA_STYLE_COLOUR('',#3171); +#3200 = STYLED_ITEM('color',(#3201),#168); +#3201 = PRESENTATION_STYLE_ASSIGNMENT((#3202)); +#3202 = SURFACE_STYLE_USAGE(.BOTH.,#3203); +#3203 = SURFACE_SIDE_STYLE('',(#3204)); +#3204 = SURFACE_STYLE_FILL_AREA(#3205); +#3205 = FILL_AREA_STYLE('',(#3206)); +#3206 = FILL_AREA_STYLE_COLOUR('',#3171); +#3207 = STYLED_ITEM('color',(#3208),#185); +#3208 = PRESENTATION_STYLE_ASSIGNMENT((#3209)); +#3209 = SURFACE_STYLE_USAGE(.BOTH.,#3210); +#3210 = SURFACE_SIDE_STYLE('',(#3211)); +#3211 = SURFACE_STYLE_FILL_AREA(#3212); +#3212 = FILL_AREA_STYLE('',(#3213)); +#3213 = FILL_AREA_STYLE_COLOUR('',#3214); +#3214 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#3215 = STYLED_ITEM('color',(#3216),#680); +#3216 = PRESENTATION_STYLE_ASSIGNMENT((#3217)); +#3217 = SURFACE_STYLE_USAGE(.BOTH.,#3218); +#3218 = SURFACE_SIDE_STYLE('',(#3219)); +#3219 = SURFACE_STYLE_FILL_AREA(#3220); +#3220 = FILL_AREA_STYLE('',(#3221)); +#3221 = FILL_AREA_STYLE_COLOUR('',#3214); +#3222 = STYLED_ITEM('color',(#3223),#872); +#3223 = PRESENTATION_STYLE_ASSIGNMENT((#3224)); +#3224 = SURFACE_STYLE_USAGE(.BOTH.,#3225); +#3225 = SURFACE_SIDE_STYLE('',(#3226)); +#3226 = SURFACE_STYLE_FILL_AREA(#3227); +#3227 = FILL_AREA_STYLE('',(#3228)); +#3228 = FILL_AREA_STYLE_COLOUR('',#3214); +#3229 = STYLED_ITEM('color',(#3230),#896); +#3230 = PRESENTATION_STYLE_ASSIGNMENT((#3231)); +#3231 = SURFACE_STYLE_USAGE(.BOTH.,#3232); +#3232 = SURFACE_SIDE_STYLE('',(#3233)); +#3233 = SURFACE_STYLE_FILL_AREA(#3234); +#3234 = FILL_AREA_STYLE('',(#3235)); +#3235 = FILL_AREA_STYLE_COLOUR('',#3171); +#3236 = STYLED_ITEM('color',(#3237),#936); +#3237 = PRESENTATION_STYLE_ASSIGNMENT((#3238)); +#3238 = SURFACE_STYLE_USAGE(.BOTH.,#3239); +#3239 = SURFACE_SIDE_STYLE('',(#3240)); +#3240 = SURFACE_STYLE_FILL_AREA(#3241); +#3241 = FILL_AREA_STYLE('',(#3242)); +#3242 = FILL_AREA_STYLE_COLOUR('',#3214); +#3243 = STYLED_ITEM('color',(#3244),#1121); +#3244 = PRESENTATION_STYLE_ASSIGNMENT((#3245)); +#3245 = SURFACE_STYLE_USAGE(.BOTH.,#3246); +#3246 = SURFACE_SIDE_STYLE('',(#3247)); +#3247 = SURFACE_STYLE_FILL_AREA(#3248); +#3248 = FILL_AREA_STYLE('',(#3249)); +#3249 = FILL_AREA_STYLE_COLOUR('',#3171); +#3250 = STYLED_ITEM('color',(#3251),#1145); +#3251 = PRESENTATION_STYLE_ASSIGNMENT((#3252)); +#3252 = SURFACE_STYLE_USAGE(.BOTH.,#3253); +#3253 = SURFACE_SIDE_STYLE('',(#3254)); +#3254 = SURFACE_STYLE_FILL_AREA(#3255); +#3255 = FILL_AREA_STYLE('',(#3256)); +#3256 = FILL_AREA_STYLE_COLOUR('',#3171); +#3257 = STYLED_ITEM('color',(#3258),#1185); +#3258 = PRESENTATION_STYLE_ASSIGNMENT((#3259)); +#3259 = SURFACE_STYLE_USAGE(.BOTH.,#3260); +#3260 = SURFACE_SIDE_STYLE('',(#3261)); +#3261 = SURFACE_STYLE_FILL_AREA(#3262); +#3262 = FILL_AREA_STYLE('',(#3263)); +#3263 = FILL_AREA_STYLE_COLOUR('',#3171); +#3264 = STYLED_ITEM('color',(#3265),#1218); +#3265 = PRESENTATION_STYLE_ASSIGNMENT((#3266)); +#3266 = SURFACE_STYLE_USAGE(.BOTH.,#3267); +#3267 = SURFACE_SIDE_STYLE('',(#3268)); +#3268 = SURFACE_STYLE_FILL_AREA(#3269); +#3269 = FILL_AREA_STYLE('',(#3270)); +#3270 = FILL_AREA_STYLE_COLOUR('',#3171); +#3271 = STYLED_ITEM('color',(#3272),#1242); +#3272 = PRESENTATION_STYLE_ASSIGNMENT((#3273)); +#3273 = SURFACE_STYLE_USAGE(.BOTH.,#3274); +#3274 = SURFACE_SIDE_STYLE('',(#3275)); +#3275 = SURFACE_STYLE_FILL_AREA(#3276); +#3276 = FILL_AREA_STYLE('',(#3277)); +#3277 = FILL_AREA_STYLE_COLOUR('',#3171); +#3278 = STYLED_ITEM('color',(#3279),#1275); +#3279 = PRESENTATION_STYLE_ASSIGNMENT((#3280)); +#3280 = SURFACE_STYLE_USAGE(.BOTH.,#3281); +#3281 = SURFACE_SIDE_STYLE('',(#3282)); +#3282 = SURFACE_STYLE_FILL_AREA(#3283); +#3283 = FILL_AREA_STYLE('',(#3284)); +#3284 = FILL_AREA_STYLE_COLOUR('',#3171); +#3285 = STYLED_ITEM('color',(#3286),#1315); +#3286 = PRESENTATION_STYLE_ASSIGNMENT((#3287)); +#3287 = SURFACE_STYLE_USAGE(.BOTH.,#3288); +#3288 = SURFACE_SIDE_STYLE('',(#3289)); +#3289 = SURFACE_STYLE_FILL_AREA(#3290); +#3290 = FILL_AREA_STYLE('',(#3291)); +#3291 = FILL_AREA_STYLE_COLOUR('',#3171); +#3292 = STYLED_ITEM('color',(#3293),#1339); +#3293 = PRESENTATION_STYLE_ASSIGNMENT((#3294)); +#3294 = SURFACE_STYLE_USAGE(.BOTH.,#3295); +#3295 = SURFACE_SIDE_STYLE('',(#3296)); +#3296 = SURFACE_STYLE_FILL_AREA(#3297); +#3297 = FILL_AREA_STYLE('',(#3298)); +#3298 = FILL_AREA_STYLE_COLOUR('',#3171); +#3299 = STYLED_ITEM('color',(#3300),#1379); +#3300 = PRESENTATION_STYLE_ASSIGNMENT((#3301)); +#3301 = SURFACE_STYLE_USAGE(.BOTH.,#3302); +#3302 = SURFACE_SIDE_STYLE('',(#3303)); +#3303 = SURFACE_STYLE_FILL_AREA(#3304); +#3304 = FILL_AREA_STYLE('',(#3305)); +#3305 = FILL_AREA_STYLE_COLOUR('',#3171); +#3306 = STYLED_ITEM('color',(#3307),#1412); +#3307 = PRESENTATION_STYLE_ASSIGNMENT((#3308)); +#3308 = SURFACE_STYLE_USAGE(.BOTH.,#3309); +#3309 = SURFACE_SIDE_STYLE('',(#3310)); +#3310 = SURFACE_STYLE_FILL_AREA(#3311); +#3311 = FILL_AREA_STYLE('',(#3312)); +#3312 = FILL_AREA_STYLE_COLOUR('',#3171); +#3313 = STYLED_ITEM('color',(#3314),#1436); +#3314 = PRESENTATION_STYLE_ASSIGNMENT((#3315)); +#3315 = SURFACE_STYLE_USAGE(.BOTH.,#3316); +#3316 = SURFACE_SIDE_STYLE('',(#3317)); +#3317 = SURFACE_STYLE_FILL_AREA(#3318); +#3318 = FILL_AREA_STYLE('',(#3319)); +#3319 = FILL_AREA_STYLE_COLOUR('',#3171); +#3320 = STYLED_ITEM('color',(#3321),#1469); +#3321 = PRESENTATION_STYLE_ASSIGNMENT((#3322)); +#3322 = SURFACE_STYLE_USAGE(.BOTH.,#3323); +#3323 = SURFACE_SIDE_STYLE('',(#3324)); +#3324 = SURFACE_STYLE_FILL_AREA(#3325); +#3325 = FILL_AREA_STYLE('',(#3326)); +#3326 = FILL_AREA_STYLE_COLOUR('',#3171); +#3327 = STYLED_ITEM('color',(#3328),#1509); +#3328 = PRESENTATION_STYLE_ASSIGNMENT((#3329)); +#3329 = SURFACE_STYLE_USAGE(.BOTH.,#3330); +#3330 = SURFACE_SIDE_STYLE('',(#3331)); +#3331 = SURFACE_STYLE_FILL_AREA(#3332); +#3332 = FILL_AREA_STYLE('',(#3333)); +#3333 = FILL_AREA_STYLE_COLOUR('',#3171); +#3334 = STYLED_ITEM('color',(#3335),#1533); +#3335 = PRESENTATION_STYLE_ASSIGNMENT((#3336)); +#3336 = SURFACE_STYLE_USAGE(.BOTH.,#3337); +#3337 = SURFACE_SIDE_STYLE('',(#3338)); +#3338 = SURFACE_STYLE_FILL_AREA(#3339); +#3339 = FILL_AREA_STYLE('',(#3340)); +#3340 = FILL_AREA_STYLE_COLOUR('',#3171); +#3341 = STYLED_ITEM('color',(#3342),#1573); +#3342 = PRESENTATION_STYLE_ASSIGNMENT((#3343)); +#3343 = SURFACE_STYLE_USAGE(.BOTH.,#3344); +#3344 = SURFACE_SIDE_STYLE('',(#3345)); +#3345 = SURFACE_STYLE_FILL_AREA(#3346); +#3346 = FILL_AREA_STYLE('',(#3347)); +#3347 = FILL_AREA_STYLE_COLOUR('',#3171); +#3348 = STYLED_ITEM('color',(#3349),#1606); +#3349 = PRESENTATION_STYLE_ASSIGNMENT((#3350)); +#3350 = SURFACE_STYLE_USAGE(.BOTH.,#3351); +#3351 = SURFACE_SIDE_STYLE('',(#3352)); +#3352 = SURFACE_STYLE_FILL_AREA(#3353); +#3353 = FILL_AREA_STYLE('',(#3354)); +#3354 = FILL_AREA_STYLE_COLOUR('',#3171); +#3355 = STYLED_ITEM('color',(#3356),#1630); +#3356 = PRESENTATION_STYLE_ASSIGNMENT((#3357)); +#3357 = SURFACE_STYLE_USAGE(.BOTH.,#3358); +#3358 = SURFACE_SIDE_STYLE('',(#3359)); +#3359 = SURFACE_STYLE_FILL_AREA(#3360); +#3360 = FILL_AREA_STYLE('',(#3361)); +#3361 = FILL_AREA_STYLE_COLOUR('',#3171); +#3362 = STYLED_ITEM('color',(#3363),#1663); +#3363 = PRESENTATION_STYLE_ASSIGNMENT((#3364)); +#3364 = SURFACE_STYLE_USAGE(.BOTH.,#3365); +#3365 = SURFACE_SIDE_STYLE('',(#3366)); +#3366 = SURFACE_STYLE_FILL_AREA(#3367); +#3367 = FILL_AREA_STYLE('',(#3368)); +#3368 = FILL_AREA_STYLE_COLOUR('',#3171); +#3369 = STYLED_ITEM('color',(#3370),#1703); +#3370 = PRESENTATION_STYLE_ASSIGNMENT((#3371)); +#3371 = SURFACE_STYLE_USAGE(.BOTH.,#3372); +#3372 = SURFACE_SIDE_STYLE('',(#3373)); +#3373 = SURFACE_STYLE_FILL_AREA(#3374); +#3374 = FILL_AREA_STYLE('',(#3375)); +#3375 = FILL_AREA_STYLE_COLOUR('',#3171); +#3376 = STYLED_ITEM('color',(#3377),#1727); +#3377 = PRESENTATION_STYLE_ASSIGNMENT((#3378)); +#3378 = SURFACE_STYLE_USAGE(.BOTH.,#3379); +#3379 = SURFACE_SIDE_STYLE('',(#3380)); +#3380 = SURFACE_STYLE_FILL_AREA(#3381); +#3381 = FILL_AREA_STYLE('',(#3382)); +#3382 = FILL_AREA_STYLE_COLOUR('',#3171); +#3383 = STYLED_ITEM('color',(#3384),#1767); +#3384 = PRESENTATION_STYLE_ASSIGNMENT((#3385)); +#3385 = SURFACE_STYLE_USAGE(.BOTH.,#3386); +#3386 = SURFACE_SIDE_STYLE('',(#3387)); +#3387 = SURFACE_STYLE_FILL_AREA(#3388); +#3388 = FILL_AREA_STYLE('',(#3389)); +#3389 = FILL_AREA_STYLE_COLOUR('',#3171); +#3390 = STYLED_ITEM('color',(#3391),#1800); +#3391 = PRESENTATION_STYLE_ASSIGNMENT((#3392)); +#3392 = SURFACE_STYLE_USAGE(.BOTH.,#3393); +#3393 = SURFACE_SIDE_STYLE('',(#3394)); +#3394 = SURFACE_STYLE_FILL_AREA(#3395); +#3395 = FILL_AREA_STYLE('',(#3396)); +#3396 = FILL_AREA_STYLE_COLOUR('',#3171); +#3397 = STYLED_ITEM('color',(#3398),#1824); +#3398 = PRESENTATION_STYLE_ASSIGNMENT((#3399)); +#3399 = SURFACE_STYLE_USAGE(.BOTH.,#3400); +#3400 = SURFACE_SIDE_STYLE('',(#3401)); +#3401 = SURFACE_STYLE_FILL_AREA(#3402); +#3402 = FILL_AREA_STYLE('',(#3403)); +#3403 = FILL_AREA_STYLE_COLOUR('',#3171); +#3404 = STYLED_ITEM('color',(#3405),#1857); +#3405 = PRESENTATION_STYLE_ASSIGNMENT((#3406)); +#3406 = SURFACE_STYLE_USAGE(.BOTH.,#3407); +#3407 = SURFACE_SIDE_STYLE('',(#3408)); +#3408 = SURFACE_STYLE_FILL_AREA(#3409); +#3409 = FILL_AREA_STYLE('',(#3410)); +#3410 = FILL_AREA_STYLE_COLOUR('',#3171); +#3411 = STYLED_ITEM('color',(#3412),#1897); +#3412 = PRESENTATION_STYLE_ASSIGNMENT((#3413)); +#3413 = SURFACE_STYLE_USAGE(.BOTH.,#3414); +#3414 = SURFACE_SIDE_STYLE('',(#3415)); +#3415 = SURFACE_STYLE_FILL_AREA(#3416); +#3416 = FILL_AREA_STYLE('',(#3417)); +#3417 = FILL_AREA_STYLE_COLOUR('',#3171); +#3418 = STYLED_ITEM('color',(#3419),#1921); +#3419 = PRESENTATION_STYLE_ASSIGNMENT((#3420)); +#3420 = SURFACE_STYLE_USAGE(.BOTH.,#3421); +#3421 = SURFACE_SIDE_STYLE('',(#3422)); +#3422 = SURFACE_STYLE_FILL_AREA(#3423); +#3423 = FILL_AREA_STYLE('',(#3424)); +#3424 = FILL_AREA_STYLE_COLOUR('',#3171); +#3425 = STYLED_ITEM('color',(#3426),#1961); +#3426 = PRESENTATION_STYLE_ASSIGNMENT((#3427)); +#3427 = SURFACE_STYLE_USAGE(.BOTH.,#3428); +#3428 = SURFACE_SIDE_STYLE('',(#3429)); +#3429 = SURFACE_STYLE_FILL_AREA(#3430); +#3430 = FILL_AREA_STYLE('',(#3431)); +#3431 = FILL_AREA_STYLE_COLOUR('',#3171); +#3432 = STYLED_ITEM('color',(#3433),#1994); +#3433 = PRESENTATION_STYLE_ASSIGNMENT((#3434)); +#3434 = SURFACE_STYLE_USAGE(.BOTH.,#3435); +#3435 = SURFACE_SIDE_STYLE('',(#3436)); +#3436 = SURFACE_STYLE_FILL_AREA(#3437); +#3437 = FILL_AREA_STYLE('',(#3438)); +#3438 = FILL_AREA_STYLE_COLOUR('',#3171); +#3439 = STYLED_ITEM('color',(#3440),#2018); +#3440 = PRESENTATION_STYLE_ASSIGNMENT((#3441)); +#3441 = SURFACE_STYLE_USAGE(.BOTH.,#3442); +#3442 = SURFACE_SIDE_STYLE('',(#3443)); +#3443 = SURFACE_STYLE_FILL_AREA(#3444); +#3444 = FILL_AREA_STYLE('',(#3445)); +#3445 = FILL_AREA_STYLE_COLOUR('',#3171); +#3446 = STYLED_ITEM('color',(#3447),#2051); +#3447 = PRESENTATION_STYLE_ASSIGNMENT((#3448)); +#3448 = SURFACE_STYLE_USAGE(.BOTH.,#3449); +#3449 = SURFACE_SIDE_STYLE('',(#3450)); +#3450 = SURFACE_STYLE_FILL_AREA(#3451); +#3451 = FILL_AREA_STYLE('',(#3452)); +#3452 = FILL_AREA_STYLE_COLOUR('',#3171); +#3453 = STYLED_ITEM('color',(#3454),#2091); +#3454 = PRESENTATION_STYLE_ASSIGNMENT((#3455)); +#3455 = SURFACE_STYLE_USAGE(.BOTH.,#3456); +#3456 = SURFACE_SIDE_STYLE('',(#3457)); +#3457 = SURFACE_STYLE_FILL_AREA(#3458); +#3458 = FILL_AREA_STYLE('',(#3459)); +#3459 = FILL_AREA_STYLE_COLOUR('',#3171); +#3460 = STYLED_ITEM('color',(#3461),#2115); +#3461 = PRESENTATION_STYLE_ASSIGNMENT((#3462)); +#3462 = SURFACE_STYLE_USAGE(.BOTH.,#3463); +#3463 = SURFACE_SIDE_STYLE('',(#3464)); +#3464 = SURFACE_STYLE_FILL_AREA(#3465); +#3465 = FILL_AREA_STYLE('',(#3466)); +#3466 = FILL_AREA_STYLE_COLOUR('',#3171); +#3467 = STYLED_ITEM('color',(#3468),#2155); +#3468 = PRESENTATION_STYLE_ASSIGNMENT((#3469)); +#3469 = SURFACE_STYLE_USAGE(.BOTH.,#3470); +#3470 = SURFACE_SIDE_STYLE('',(#3471)); +#3471 = SURFACE_STYLE_FILL_AREA(#3472); +#3472 = FILL_AREA_STYLE('',(#3473)); +#3473 = FILL_AREA_STYLE_COLOUR('',#3171); +#3474 = STYLED_ITEM('color',(#3475),#2188); +#3475 = PRESENTATION_STYLE_ASSIGNMENT((#3476)); +#3476 = SURFACE_STYLE_USAGE(.BOTH.,#3477); +#3477 = SURFACE_SIDE_STYLE('',(#3478)); +#3478 = SURFACE_STYLE_FILL_AREA(#3479); +#3479 = FILL_AREA_STYLE('',(#3480)); +#3480 = FILL_AREA_STYLE_COLOUR('',#3171); +#3481 = STYLED_ITEM('color',(#3482),#2212); +#3482 = PRESENTATION_STYLE_ASSIGNMENT((#3483)); +#3483 = SURFACE_STYLE_USAGE(.BOTH.,#3484); +#3484 = SURFACE_SIDE_STYLE('',(#3485)); +#3485 = SURFACE_STYLE_FILL_AREA(#3486); +#3486 = FILL_AREA_STYLE('',(#3487)); +#3487 = FILL_AREA_STYLE_COLOUR('',#3171); +#3488 = STYLED_ITEM('color',(#3489),#2245); +#3489 = PRESENTATION_STYLE_ASSIGNMENT((#3490)); +#3490 = SURFACE_STYLE_USAGE(.BOTH.,#3491); +#3491 = SURFACE_SIDE_STYLE('',(#3492)); +#3492 = SURFACE_STYLE_FILL_AREA(#3493); +#3493 = FILL_AREA_STYLE('',(#3494)); +#3494 = FILL_AREA_STYLE_COLOUR('',#3171); +#3495 = STYLED_ITEM('color',(#3496),#2285); +#3496 = PRESENTATION_STYLE_ASSIGNMENT((#3497)); +#3497 = SURFACE_STYLE_USAGE(.BOTH.,#3498); +#3498 = SURFACE_SIDE_STYLE('',(#3499)); +#3499 = SURFACE_STYLE_FILL_AREA(#3500); +#3500 = FILL_AREA_STYLE('',(#3501)); +#3501 = FILL_AREA_STYLE_COLOUR('',#3171); +#3502 = STYLED_ITEM('color',(#3503),#2309); +#3503 = PRESENTATION_STYLE_ASSIGNMENT((#3504)); +#3504 = SURFACE_STYLE_USAGE(.BOTH.,#3505); +#3505 = SURFACE_SIDE_STYLE('',(#3506)); +#3506 = SURFACE_STYLE_FILL_AREA(#3507); +#3507 = FILL_AREA_STYLE('',(#3508)); +#3508 = FILL_AREA_STYLE_COLOUR('',#3171); +#3509 = STYLED_ITEM('color',(#3510),#2349); +#3510 = PRESENTATION_STYLE_ASSIGNMENT((#3511)); +#3511 = SURFACE_STYLE_USAGE(.BOTH.,#3512); +#3512 = SURFACE_SIDE_STYLE('',(#3513)); +#3513 = SURFACE_STYLE_FILL_AREA(#3514); +#3514 = FILL_AREA_STYLE('',(#3515)); +#3515 = FILL_AREA_STYLE_COLOUR('',#3171); +#3516 = STYLED_ITEM('color',(#3517),#2382); +#3517 = PRESENTATION_STYLE_ASSIGNMENT((#3518)); +#3518 = SURFACE_STYLE_USAGE(.BOTH.,#3519); +#3519 = SURFACE_SIDE_STYLE('',(#3520)); +#3520 = SURFACE_STYLE_FILL_AREA(#3521); +#3521 = FILL_AREA_STYLE('',(#3522)); +#3522 = FILL_AREA_STYLE_COLOUR('',#3171); +#3523 = STYLED_ITEM('color',(#3524),#2406); +#3524 = PRESENTATION_STYLE_ASSIGNMENT((#3525)); +#3525 = SURFACE_STYLE_USAGE(.BOTH.,#3526); +#3526 = SURFACE_SIDE_STYLE('',(#3527)); +#3527 = SURFACE_STYLE_FILL_AREA(#3528); +#3528 = FILL_AREA_STYLE('',(#3529)); +#3529 = FILL_AREA_STYLE_COLOUR('',#3171); +#3530 = STYLED_ITEM('color',(#3531),#2439); +#3531 = PRESENTATION_STYLE_ASSIGNMENT((#3532)); +#3532 = SURFACE_STYLE_USAGE(.BOTH.,#3533); +#3533 = SURFACE_SIDE_STYLE('',(#3534)); +#3534 = SURFACE_STYLE_FILL_AREA(#3535); +#3535 = FILL_AREA_STYLE('',(#3536)); +#3536 = FILL_AREA_STYLE_COLOUR('',#3214); +#3537 = STYLED_ITEM('color',(#3538),#2456); +#3538 = PRESENTATION_STYLE_ASSIGNMENT((#3539)); +#3539 = SURFACE_STYLE_USAGE(.BOTH.,#3540); +#3540 = SURFACE_SIDE_STYLE('',(#3541)); +#3541 = SURFACE_STYLE_FILL_AREA(#3542); +#3542 = FILL_AREA_STYLE('',(#3543)); +#3543 = FILL_AREA_STYLE_COLOUR('',#3214); +#3544 = STYLED_ITEM('color',(#3545),#2479); +#3545 = PRESENTATION_STYLE_ASSIGNMENT((#3546)); +#3546 = SURFACE_STYLE_USAGE(.BOTH.,#3547); +#3547 = SURFACE_SIDE_STYLE('',(#3548)); +#3548 = SURFACE_STYLE_FILL_AREA(#3549); +#3549 = FILL_AREA_STYLE('',(#3550)); +#3550 = FILL_AREA_STYLE_COLOUR('',#3171); +#3551 = STYLED_ITEM('color',(#3552),#2496); +#3552 = PRESENTATION_STYLE_ASSIGNMENT((#3553)); +#3553 = SURFACE_STYLE_USAGE(.BOTH.,#3554); +#3554 = SURFACE_SIDE_STYLE('',(#3555)); +#3555 = SURFACE_STYLE_FILL_AREA(#3556); +#3556 = FILL_AREA_STYLE('',(#3557)); +#3557 = FILL_AREA_STYLE_COLOUR('',#3171); +#3558 = STYLED_ITEM('color',(#3559),#2513); +#3559 = PRESENTATION_STYLE_ASSIGNMENT((#3560)); +#3560 = SURFACE_STYLE_USAGE(.BOTH.,#3561); +#3561 = SURFACE_SIDE_STYLE('',(#3562)); +#3562 = SURFACE_STYLE_FILL_AREA(#3563); +#3563 = FILL_AREA_STYLE('',(#3564)); +#3564 = FILL_AREA_STYLE_COLOUR('',#3171); +#3565 = STYLED_ITEM('color',(#3566),#2530); +#3566 = PRESENTATION_STYLE_ASSIGNMENT((#3567)); +#3567 = SURFACE_STYLE_USAGE(.BOTH.,#3568); +#3568 = SURFACE_SIDE_STYLE('',(#3569)); +#3569 = SURFACE_STYLE_FILL_AREA(#3570); +#3570 = FILL_AREA_STYLE('',(#3571)); +#3571 = FILL_AREA_STYLE_COLOUR('',#3171); +#3572 = STYLED_ITEM('color',(#3573),#2547); +#3573 = PRESENTATION_STYLE_ASSIGNMENT((#3574)); +#3574 = SURFACE_STYLE_USAGE(.BOTH.,#3575); +#3575 = SURFACE_SIDE_STYLE('',(#3576)); +#3576 = SURFACE_STYLE_FILL_AREA(#3577); +#3577 = FILL_AREA_STYLE('',(#3578)); +#3578 = FILL_AREA_STYLE_COLOUR('',#3171); +#3579 = STYLED_ITEM('color',(#3580),#2564); +#3580 = PRESENTATION_STYLE_ASSIGNMENT((#3581)); +#3581 = SURFACE_STYLE_USAGE(.BOTH.,#3582); +#3582 = SURFACE_SIDE_STYLE('',(#3583)); +#3583 = SURFACE_STYLE_FILL_AREA(#3584); +#3584 = FILL_AREA_STYLE('',(#3585)); +#3585 = FILL_AREA_STYLE_COLOUR('',#3171); +#3586 = STYLED_ITEM('color',(#3587),#2581); +#3587 = PRESENTATION_STYLE_ASSIGNMENT((#3588)); +#3588 = SURFACE_STYLE_USAGE(.BOTH.,#3589); +#3589 = SURFACE_SIDE_STYLE('',(#3590)); +#3590 = SURFACE_STYLE_FILL_AREA(#3591); +#3591 = FILL_AREA_STYLE('',(#3592)); +#3592 = FILL_AREA_STYLE_COLOUR('',#3171); +#3593 = STYLED_ITEM('color',(#3594),#2598); +#3594 = PRESENTATION_STYLE_ASSIGNMENT((#3595)); +#3595 = SURFACE_STYLE_USAGE(.BOTH.,#3596); +#3596 = SURFACE_SIDE_STYLE('',(#3597)); +#3597 = SURFACE_STYLE_FILL_AREA(#3598); +#3598 = FILL_AREA_STYLE('',(#3599)); +#3599 = FILL_AREA_STYLE_COLOUR('',#3171); +#3600 = STYLED_ITEM('color',(#3601),#2615); +#3601 = PRESENTATION_STYLE_ASSIGNMENT((#3602)); +#3602 = SURFACE_STYLE_USAGE(.BOTH.,#3603); +#3603 = SURFACE_SIDE_STYLE('',(#3604)); +#3604 = SURFACE_STYLE_FILL_AREA(#3605); +#3605 = FILL_AREA_STYLE('',(#3606)); +#3606 = FILL_AREA_STYLE_COLOUR('',#3171); +#3607 = STYLED_ITEM('color',(#3608),#2627); +#3608 = PRESENTATION_STYLE_ASSIGNMENT((#3609)); +#3609 = SURFACE_STYLE_USAGE(.BOTH.,#3610); +#3610 = SURFACE_SIDE_STYLE('',(#3611)); +#3611 = SURFACE_STYLE_FILL_AREA(#3612); +#3612 = FILL_AREA_STYLE('',(#3613)); +#3613 = FILL_AREA_STYLE_COLOUR('',#3171); +#3614 = STYLED_ITEM('color',(#3615),#2644); +#3615 = PRESENTATION_STYLE_ASSIGNMENT((#3616)); +#3616 = SURFACE_STYLE_USAGE(.BOTH.,#3617); +#3617 = SURFACE_SIDE_STYLE('',(#3618)); +#3618 = SURFACE_STYLE_FILL_AREA(#3619); +#3619 = FILL_AREA_STYLE('',(#3620)); +#3620 = FILL_AREA_STYLE_COLOUR('',#3171); +#3621 = STYLED_ITEM('color',(#3622),#2661); +#3622 = PRESENTATION_STYLE_ASSIGNMENT((#3623)); +#3623 = SURFACE_STYLE_USAGE(.BOTH.,#3624); +#3624 = SURFACE_SIDE_STYLE('',(#3625)); +#3625 = SURFACE_STYLE_FILL_AREA(#3626); +#3626 = FILL_AREA_STYLE('',(#3627)); +#3627 = FILL_AREA_STYLE_COLOUR('',#3171); +#3628 = STYLED_ITEM('color',(#3629),#2678); +#3629 = PRESENTATION_STYLE_ASSIGNMENT((#3630)); +#3630 = SURFACE_STYLE_USAGE(.BOTH.,#3631); +#3631 = SURFACE_SIDE_STYLE('',(#3632)); +#3632 = SURFACE_STYLE_FILL_AREA(#3633); +#3633 = FILL_AREA_STYLE('',(#3634)); +#3634 = FILL_AREA_STYLE_COLOUR('',#3171); +#3635 = STYLED_ITEM('color',(#3636),#2695); +#3636 = PRESENTATION_STYLE_ASSIGNMENT((#3637)); +#3637 = SURFACE_STYLE_USAGE(.BOTH.,#3638); +#3638 = SURFACE_SIDE_STYLE('',(#3639)); +#3639 = SURFACE_STYLE_FILL_AREA(#3640); +#3640 = FILL_AREA_STYLE('',(#3641)); +#3641 = FILL_AREA_STYLE_COLOUR('',#3171); +#3642 = STYLED_ITEM('color',(#3643),#2712); +#3643 = PRESENTATION_STYLE_ASSIGNMENT((#3644)); +#3644 = SURFACE_STYLE_USAGE(.BOTH.,#3645); +#3645 = SURFACE_SIDE_STYLE('',(#3646)); +#3646 = SURFACE_STYLE_FILL_AREA(#3647); +#3647 = FILL_AREA_STYLE('',(#3648)); +#3648 = FILL_AREA_STYLE_COLOUR('',#3171); +#3649 = STYLED_ITEM('color',(#3650),#2729); +#3650 = PRESENTATION_STYLE_ASSIGNMENT((#3651)); +#3651 = SURFACE_STYLE_USAGE(.BOTH.,#3652); +#3652 = SURFACE_SIDE_STYLE('',(#3653)); +#3653 = SURFACE_STYLE_FILL_AREA(#3654); +#3654 = FILL_AREA_STYLE('',(#3655)); +#3655 = FILL_AREA_STYLE_COLOUR('',#3171); +#3656 = STYLED_ITEM('color',(#3657),#2746); +#3657 = PRESENTATION_STYLE_ASSIGNMENT((#3658)); +#3658 = SURFACE_STYLE_USAGE(.BOTH.,#3659); +#3659 = SURFACE_SIDE_STYLE('',(#3660)); +#3660 = SURFACE_STYLE_FILL_AREA(#3661); +#3661 = FILL_AREA_STYLE('',(#3662)); +#3662 = FILL_AREA_STYLE_COLOUR('',#3171); +#3663 = STYLED_ITEM('color',(#3664),#2763); +#3664 = PRESENTATION_STYLE_ASSIGNMENT((#3665)); +#3665 = SURFACE_STYLE_USAGE(.BOTH.,#3666); +#3666 = SURFACE_SIDE_STYLE('',(#3667)); +#3667 = SURFACE_STYLE_FILL_AREA(#3668); +#3668 = FILL_AREA_STYLE('',(#3669)); +#3669 = FILL_AREA_STYLE_COLOUR('',#3171); +#3670 = STYLED_ITEM('color',(#3671),#2775); +#3671 = PRESENTATION_STYLE_ASSIGNMENT((#3672)); +#3672 = SURFACE_STYLE_USAGE(.BOTH.,#3673); +#3673 = SURFACE_SIDE_STYLE('',(#3674)); +#3674 = SURFACE_STYLE_FILL_AREA(#3675); +#3675 = FILL_AREA_STYLE('',(#3676)); +#3676 = FILL_AREA_STYLE_COLOUR('',#3171); +#3677 = STYLED_ITEM('color',(#3678),#2792); +#3678 = PRESENTATION_STYLE_ASSIGNMENT((#3679)); +#3679 = SURFACE_STYLE_USAGE(.BOTH.,#3680); +#3680 = SURFACE_SIDE_STYLE('',(#3681)); +#3681 = SURFACE_STYLE_FILL_AREA(#3682); +#3682 = FILL_AREA_STYLE('',(#3683)); +#3683 = FILL_AREA_STYLE_COLOUR('',#3171); +#3684 = STYLED_ITEM('color',(#3685),#2804); +#3685 = PRESENTATION_STYLE_ASSIGNMENT((#3686)); +#3686 = SURFACE_STYLE_USAGE(.BOTH.,#3687); +#3687 = SURFACE_SIDE_STYLE('',(#3688)); +#3688 = SURFACE_STYLE_FILL_AREA(#3689); +#3689 = FILL_AREA_STYLE('',(#3690)); +#3690 = FILL_AREA_STYLE_COLOUR('',#3171); +#3691 = STYLED_ITEM('color',(#3692),#2821); +#3692 = PRESENTATION_STYLE_ASSIGNMENT((#3693)); +#3693 = SURFACE_STYLE_USAGE(.BOTH.,#3694); +#3694 = SURFACE_SIDE_STYLE('',(#3695)); +#3695 = SURFACE_STYLE_FILL_AREA(#3696); +#3696 = FILL_AREA_STYLE('',(#3697)); +#3697 = FILL_AREA_STYLE_COLOUR('',#3171); +#3698 = STYLED_ITEM('color',(#3699),#2833); +#3699 = PRESENTATION_STYLE_ASSIGNMENT((#3700)); +#3700 = SURFACE_STYLE_USAGE(.BOTH.,#3701); +#3701 = SURFACE_SIDE_STYLE('',(#3702)); +#3702 = SURFACE_STYLE_FILL_AREA(#3703); +#3703 = FILL_AREA_STYLE('',(#3704)); +#3704 = FILL_AREA_STYLE_COLOUR('',#3171); +#3705 = STYLED_ITEM('color',(#3706),#2850); +#3706 = PRESENTATION_STYLE_ASSIGNMENT((#3707)); +#3707 = SURFACE_STYLE_USAGE(.BOTH.,#3708); +#3708 = SURFACE_SIDE_STYLE('',(#3709)); +#3709 = SURFACE_STYLE_FILL_AREA(#3710); +#3710 = FILL_AREA_STYLE('',(#3711)); +#3711 = FILL_AREA_STYLE_COLOUR('',#3171); +#3712 = STYLED_ITEM('color',(#3713),#2862); +#3713 = PRESENTATION_STYLE_ASSIGNMENT((#3714)); +#3714 = SURFACE_STYLE_USAGE(.BOTH.,#3715); +#3715 = SURFACE_SIDE_STYLE('',(#3716)); +#3716 = SURFACE_STYLE_FILL_AREA(#3717); +#3717 = FILL_AREA_STYLE('',(#3718)); +#3718 = FILL_AREA_STYLE_COLOUR('',#3171); +#3719 = STYLED_ITEM('color',(#3720),#2879); +#3720 = PRESENTATION_STYLE_ASSIGNMENT((#3721)); +#3721 = SURFACE_STYLE_USAGE(.BOTH.,#3722); +#3722 = SURFACE_SIDE_STYLE('',(#3723)); +#3723 = SURFACE_STYLE_FILL_AREA(#3724); +#3724 = FILL_AREA_STYLE('',(#3725)); +#3725 = FILL_AREA_STYLE_COLOUR('',#3171); +#3726 = STYLED_ITEM('color',(#3727),#2891); +#3727 = PRESENTATION_STYLE_ASSIGNMENT((#3728)); +#3728 = SURFACE_STYLE_USAGE(.BOTH.,#3729); +#3729 = SURFACE_SIDE_STYLE('',(#3730)); +#3730 = SURFACE_STYLE_FILL_AREA(#3731); +#3731 = FILL_AREA_STYLE('',(#3732)); +#3732 = FILL_AREA_STYLE_COLOUR('',#3171); +#3733 = STYLED_ITEM('color',(#3734),#2908); +#3734 = PRESENTATION_STYLE_ASSIGNMENT((#3735)); +#3735 = SURFACE_STYLE_USAGE(.BOTH.,#3736); +#3736 = SURFACE_SIDE_STYLE('',(#3737)); +#3737 = SURFACE_STYLE_FILL_AREA(#3738); +#3738 = FILL_AREA_STYLE('',(#3739)); +#3739 = FILL_AREA_STYLE_COLOUR('',#3171); +#3740 = STYLED_ITEM('color',(#3741),#2920); +#3741 = PRESENTATION_STYLE_ASSIGNMENT((#3742)); +#3742 = SURFACE_STYLE_USAGE(.BOTH.,#3743); +#3743 = SURFACE_SIDE_STYLE('',(#3744)); +#3744 = SURFACE_STYLE_FILL_AREA(#3745); +#3745 = FILL_AREA_STYLE('',(#3746)); +#3746 = FILL_AREA_STYLE_COLOUR('',#3171); +#3747 = STYLED_ITEM('color',(#3748),#2937); +#3748 = PRESENTATION_STYLE_ASSIGNMENT((#3749)); +#3749 = SURFACE_STYLE_USAGE(.BOTH.,#3750); +#3750 = SURFACE_SIDE_STYLE('',(#3751)); +#3751 = SURFACE_STYLE_FILL_AREA(#3752); +#3752 = FILL_AREA_STYLE('',(#3753)); +#3753 = FILL_AREA_STYLE_COLOUR('',#3171); +#3754 = STYLED_ITEM('color',(#3755),#2949); +#3755 = PRESENTATION_STYLE_ASSIGNMENT((#3756)); +#3756 = SURFACE_STYLE_USAGE(.BOTH.,#3757); +#3757 = SURFACE_SIDE_STYLE('',(#3758)); +#3758 = SURFACE_STYLE_FILL_AREA(#3759); +#3759 = FILL_AREA_STYLE('',(#3760)); +#3760 = FILL_AREA_STYLE_COLOUR('',#3171); +#3761 = STYLED_ITEM('color',(#3762),#2966); +#3762 = PRESENTATION_STYLE_ASSIGNMENT((#3763)); +#3763 = SURFACE_STYLE_USAGE(.BOTH.,#3764); +#3764 = SURFACE_SIDE_STYLE('',(#3765)); +#3765 = SURFACE_STYLE_FILL_AREA(#3766); +#3766 = FILL_AREA_STYLE('',(#3767)); +#3767 = FILL_AREA_STYLE_COLOUR('',#3171); +#3768 = STYLED_ITEM('color',(#3769),#2978); +#3769 = PRESENTATION_STYLE_ASSIGNMENT((#3770)); +#3770 = SURFACE_STYLE_USAGE(.BOTH.,#3771); +#3771 = SURFACE_SIDE_STYLE('',(#3772)); +#3772 = SURFACE_STYLE_FILL_AREA(#3773); +#3773 = FILL_AREA_STYLE('',(#3774)); +#3774 = FILL_AREA_STYLE_COLOUR('',#3171); +#3775 = STYLED_ITEM('color',(#3776),#2995); +#3776 = PRESENTATION_STYLE_ASSIGNMENT((#3777)); +#3777 = SURFACE_STYLE_USAGE(.BOTH.,#3778); +#3778 = SURFACE_SIDE_STYLE('',(#3779)); +#3779 = SURFACE_STYLE_FILL_AREA(#3780); +#3780 = FILL_AREA_STYLE('',(#3781)); +#3781 = FILL_AREA_STYLE_COLOUR('',#3171); +#3782 = STYLED_ITEM('color',(#3783),#3007); +#3783 = PRESENTATION_STYLE_ASSIGNMENT((#3784)); +#3784 = SURFACE_STYLE_USAGE(.BOTH.,#3785); +#3785 = SURFACE_SIDE_STYLE('',(#3786)); +#3786 = SURFACE_STYLE_FILL_AREA(#3787); +#3787 = FILL_AREA_STYLE('',(#3788)); +#3788 = FILL_AREA_STYLE_COLOUR('',#3171); +#3789 = STYLED_ITEM('color',(#3790),#3024); +#3790 = PRESENTATION_STYLE_ASSIGNMENT((#3791)); +#3791 = SURFACE_STYLE_USAGE(.BOTH.,#3792); +#3792 = SURFACE_SIDE_STYLE('',(#3793)); +#3793 = SURFACE_STYLE_FILL_AREA(#3794); +#3794 = FILL_AREA_STYLE('',(#3795)); +#3795 = FILL_AREA_STYLE_COLOUR('',#3171); +#3796 = STYLED_ITEM('color',(#3797),#3036); +#3797 = PRESENTATION_STYLE_ASSIGNMENT((#3798)); +#3798 = SURFACE_STYLE_USAGE(.BOTH.,#3799); +#3799 = SURFACE_SIDE_STYLE('',(#3800)); +#3800 = SURFACE_STYLE_FILL_AREA(#3801); +#3801 = FILL_AREA_STYLE('',(#3802)); +#3802 = FILL_AREA_STYLE_COLOUR('',#3171); +#3803 = STYLED_ITEM('color',(#3804),#3053); +#3804 = PRESENTATION_STYLE_ASSIGNMENT((#3805)); +#3805 = SURFACE_STYLE_USAGE(.BOTH.,#3806); +#3806 = SURFACE_SIDE_STYLE('',(#3807)); +#3807 = SURFACE_STYLE_FILL_AREA(#3808); +#3808 = FILL_AREA_STYLE('',(#3809)); +#3809 = FILL_AREA_STYLE_COLOUR('',#3171); +#3810 = STYLED_ITEM('color',(#3811),#3065); +#3811 = PRESENTATION_STYLE_ASSIGNMENT((#3812)); +#3812 = SURFACE_STYLE_USAGE(.BOTH.,#3813); +#3813 = SURFACE_SIDE_STYLE('',(#3814)); +#3814 = SURFACE_STYLE_FILL_AREA(#3815); +#3815 = FILL_AREA_STYLE('',(#3816)); +#3816 = FILL_AREA_STYLE_COLOUR('',#3171); +#3817 = STYLED_ITEM('color',(#3818),#3082); +#3818 = PRESENTATION_STYLE_ASSIGNMENT((#3819)); +#3819 = SURFACE_STYLE_USAGE(.BOTH.,#3820); +#3820 = SURFACE_SIDE_STYLE('',(#3821)); +#3821 = SURFACE_STYLE_FILL_AREA(#3822); +#3822 = FILL_AREA_STYLE('',(#3823)); +#3823 = FILL_AREA_STYLE_COLOUR('',#3171); +#3824 = STYLED_ITEM('color',(#3825),#3094); +#3825 = PRESENTATION_STYLE_ASSIGNMENT((#3826)); +#3826 = SURFACE_STYLE_USAGE(.BOTH.,#3827); +#3827 = SURFACE_SIDE_STYLE('',(#3828)); +#3828 = SURFACE_STYLE_FILL_AREA(#3829); +#3829 = FILL_AREA_STYLE('',(#3830)); +#3830 = FILL_AREA_STYLE_COLOUR('',#3171); +#3831 = STYLED_ITEM('color',(#3832),#3111); +#3832 = PRESENTATION_STYLE_ASSIGNMENT((#3833)); +#3833 = SURFACE_STYLE_USAGE(.BOTH.,#3834); +#3834 = SURFACE_SIDE_STYLE('',(#3835)); +#3835 = SURFACE_STYLE_FILL_AREA(#3836); +#3836 = FILL_AREA_STYLE('',(#3837)); +#3837 = FILL_AREA_STYLE_COLOUR('',#3171); +#3838 = STYLED_ITEM('color',(#3839),#3123); +#3839 = PRESENTATION_STYLE_ASSIGNMENT((#3840)); +#3840 = SURFACE_STYLE_USAGE(.BOTH.,#3841); +#3841 = SURFACE_SIDE_STYLE('',(#3842)); +#3842 = SURFACE_STYLE_FILL_AREA(#3843); +#3843 = FILL_AREA_STYLE('',(#3844)); +#3844 = FILL_AREA_STYLE_COLOUR('',#3845); +#3845 = COLOUR_RGB('',0.690999984741,0.663999974728,0.597999989986); +#3846 = STYLED_ITEM('color',(#3847),#3148); +#3847 = PRESENTATION_STYLE_ASSIGNMENT((#3848)); +#3848 = SURFACE_STYLE_USAGE(.BOTH.,#3849); +#3849 = SURFACE_SIDE_STYLE('',(#3850)); +#3850 = SURFACE_STYLE_FILL_AREA(#3851); +#3851 = FILL_AREA_STYLE('',(#3852)); +#3852 = FILL_AREA_STYLE_COLOUR('',#3845); +ENDSEC; +END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>sit1145aqtk</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>sit1145aqtk</title>