SIT1050T

@@ -0,0 +1,47 @@+# SIT1050T++**SIT** · CAN Controllers · SO-8++SIT1050T from SIT, in a SO-8. Pinout and pin descriptions extracted from the datasheet (via LCSC) by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TXD | input | Transmit data input from the CAN controller. CMOS-level logic input (VIH ≥ 2 V, VIL ≤ 0.8 V) with internal pull-up (IIL = -10 to -50 µA at VI = 0 V; IIH = ±2 µA at VI = VCC). A low level drives the bus dominant; high or open leaves the bus recessive. A dominant time-out (typ. 450 µs) prevents the bus from being held dominant indefinitely. |+| 2 | GND | power_in | Ground supply reference (0 V). The exposed thermal pad of the DFN3x3-8/HVSON8 variant is internally connected to this pin and should be soldered to board ground for enhanced thermal performance. |+| 3 | VCC | power_in | +5 V supply voltage input (recommended 4.5-5.5 V, abs-max -0.3 to +6 V). Typical supply current is ~6 mA in recessive/silent state and ~50 mA (max 70 mA) in dominant state with 60 Ω load. |+| 4 | RXD | output | Receive data output to the CAN controller; reads out the differential state of the CAN bus. Push-pull CMOS output (VOH ≥ 4 V at IO = -2 mA, VOL ≤ 0.4 V at IO = 2 mA). LOW = dominant bus, HIGH = recessive bus. |+| 5 | Vref | output | Reference voltage output at 0.5·VCC (spec 0.4·VCC to 0.6·VCC) capable of sourcing/sinking |IO| ≤ 50 µA. Provides a stable common-mode reference for the CAN controller or bus termination bias. |+| 6 | CANL | bidirectional | LOW-level CAN bus line (differential pair with CANH). Driven low (VOL(D) 0.5-2.25 V, typ 1.5 V) in the dominant state and biased to 0.5·VCC in the recessive state. Handles DC bus voltages of -40 to +40 V and transient ±200 V (see Fig. 7); short-circuit currents are limited by internal protection. |+| 7 | CANH | bidirectional | HIGH-level CAN bus line (differential pair with CANL). Driven high (VOH(D) 2.75-4.5 V, typ 3.5 V) in the dominant state and biased to 0.5·VCC in the recessive state. Handles DC bus voltages of -40 to +40 V and transient ±200 V; internal short-circuit and overcurrent protection. |+| 8 | S | input | Silent-mode control input (a.k.a. STB). LOW or open = normal (transmitter enabled); HIGH = silent mode (transmitter disabled, receiver still active). VIH ≥ 2.0 V, VIL ≤ 0.8 V; input current 15-60 µA at VS = 2 V. Enable time from silent to dominant ≤ 1 µs. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SIT |+| Package | SO-8 |+| Category | Interface |+| Pins | 8 |++## Ordering variants++- `SIT1050TT`++## CAD (KiCad official)++- Symbol: `SIT1050T`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SIT datasheet](https://datasheet.lcsc.com/datasheet/pdf/e16fd1b99f8169ea636176a9b7acead6.pdf) (17 pp, sha256 `32c8f1165b0507ef`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sit1050t-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "sit1050t",+  "version": "0.1.0",+  "type": "component",+  "description": "SIT CAN Controllers, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "sit1050t"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sit1050t.kicad_sym",+    "sit1050t.kicad_mod",+    "sit1050t.glb",+    "sit1050t.step",+    "sit1050t.lbr",+    "docs/hero.png",+    "docs/sit1050t-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file