SIT1040T

@@ -26,13 +26,15 @@       "model_3d_step": "sit1040t.step",       "lbr": "sit1040t.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C381512"+    },     "pins": [       {         "number": "1",         "name": "TXD",         "type": "input",-        "description": "Transmit data input from the CAN protocol controller. Drives the bus dominant when low and recessive when high. 3.3 V / 5 V logic compatible; VIH ≥ 2 V, VIL ≤ 0.8 V. Internal pull-up leaves TXD in the recessive state when floating (TXD_O = H)."+        "description": "Transmit data input from the CAN protocol controller. Drives the bus dominant when low and recessive when high. 3.3 V / 5 V logic compatible; VIH \u2265 2 V, VIL \u2264 0.8 V. Internal pull-up leaves TXD in the recessive state when floating (TXD_O = H)."       },       {         "number": "2",@@ -50,31 +52,31 @@         "number": "4",         "name": "RXD",         "type": "output",-        "description": "Receive data output to the CAN protocol controller. Reports the bus state: LOW when the bus is dominant, HIGH when recessive. Push-pull output; VOH ≥ 4 V @ IO = -2 mA, VOL ≤ 0.4 V @ IO = 2 mA."+        "description": "Receive data output to the CAN protocol controller. Reports the bus state: LOW when the bus is dominant, HIGH when recessive. Push-pull output; VOH \u2265 4 V @ IO = -2 mA, VOL \u2264 0.4 V @ IO = 2 mA."       },       {         "number": "5",         "name": "SPLIT",         "type": "output",-        "description": "Common-mode stabilization output, nominally VCC/2 (0.3·VCC to 0.7·VCC for |IO| < 500 µA). Intended to be tied to the center tap of a split termination network to stabilize the bus common-mode voltage and improve EMC."+        "description": "Common-mode stabilization output, nominally VCC/2 (0.3\u00b7VCC to 0.7\u00b7VCC for |IO| < 500 \u00b5A). Intended to be tied to the center tap of a split termination network to stabilize the bus common-mode voltage and improve EMC."       },       {         "number": "6",         "name": "CANL",         "type": "bidirectional",-        "description": "Low-level CAN bus line. Driven low in the dominant state and biased to ~VCC/2 in the recessive state. Rated -40 V to +40 V continuous, ±200 V transient; ±8 kV HBM ESD."+        "description": "Low-level CAN bus line. Driven low in the dominant state and biased to ~VCC/2 in the recessive state. Rated -40 V to +40 V continuous, \u00b1200 V transient; \u00b18 kV HBM ESD."       },       {         "number": "7",         "name": "CANH",         "type": "bidirectional",-        "description": "High-level CAN bus line. Driven high in the dominant state and biased to ~VCC/2 in the recessive state. Rated -40 V to +40 V continuous, ±200 V transient; ±8 kV HBM ESD."+        "description": "High-level CAN bus line. Driven high in the dominant state and biased to ~VCC/2 in the recessive state. Rated -40 V to +40 V continuous, \u00b1200 V transient; \u00b18 kV HBM ESD."       },       {         "number": "8",         "name": "STB",         "type": "input",-        "description": "Standby mode control input. STB = 0 selects normal (high-speed) operation; STB = 1 selects low-power standby (~5 µA typical) with bus wake-up capability. VIH ≥ 2.0 V, VIL ≤ 0.8 V."+        "description": "Standby mode control input. STB = 0 selects normal (high-speed) operation; STB = 1 selects low-power standby (~5 \u00b5A typical) with bus wake-up capability. VIH \u2265 2.0 V, VIL \u2264 0.8 V."       }     ],     "provenance": {

@@ -62,6 +62,18 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="SIT1040T">@@ -108,7 +120,13 @@         <connect gate="G$1" pin="CANL" pad="6"/>         <connect gate="G$1" pin="SPLIT" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="SIT1040T" constant="no"/>+          <attribute name="MANUFACTURER" value="SIT" constant="no"/>+          <attribute name="LCSC_PN" value="C381512" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>