SHT31

@@ -32,6 +32,8 @@ A high-accuracy digital humidity and temperature sensor with an I2C interface, i  ## Ordering variants +Same part, different packaging or reel option.+ - `SHT31-DIS-B (DFN-8)` - `SHT31-DIS-F (with filter membrane)` 

@@ -3,7 +3,7 @@   "type": "component",   "slug": "sht31",   "title": "SHT31",-  "brief": "Sensirion digital I2C humidity + temperature sensor, DFN-8. \u00b12% RH, \u00b10.3 C, up to 1 MHz, ALERT + heater. Datasheet-verified.",+  "brief": "Sensirion digital I2C humidity + temperature sensor, DFN-8. ±2% RH, ±0.3 C, up to 1 MHz, ALERT + heater. Datasheet-verified.",   "version": "0.1.0",   "license": "CC-BY-SA-4.0",   "tags": [@@ -35,7 +35,7 @@         "number": "1",         "name": "SDA",         "type": "bidirectional",-        "description": "I2C serial data line (input/output). Open-drain; requires external pull-up to VDD (e.g. 10 k\u03a9). Fast Mode up to 400 kHz; frequencies up to 1 MHz supported."+        "description": "I2C serial data line (input/output). Open-drain; requires external pull-up to VDD (e.g. 10 kΩ). Fast Mode up to 400 kHz; frequencies up to 1 MHz supported."       },       {         "number": "2",@@ -47,13 +47,13 @@         "number": "3",         "name": "ALERT",         "type": "output",-        "description": "Alarm condition output. Switches high when programmed RH/T alert limits are exceeded. Drive strength IOH \u2248 1.5 \u00d7 VDD (see Table 3). Leave floating if unused."+        "description": "Alarm condition output. Switches high when programmed RH/T alert limits are exceeded. Drive strength IOH ≈ 1.5 × VDD (see Table 3). Leave floating if unused."       },       {         "number": "4",         "name": "SCL",         "type": "input",-        "description": "I2C serial clock input (also driven low by sensor during clock stretching). Open-drain; requires external pull-up to VDD (e.g. 10 k\u03a9). Clock frequency 0-1000 kHz."+        "description": "I2C serial clock input (also driven low by sensor during clock stretching). Open-drain; requires external pull-up to VDD (e.g. 10 kΩ). Clock frequency 0-1000 kHz."       },       {         "number": "5",@@ -65,7 +65,7 @@         "number": "6",         "name": "nRESET",         "type": "input",-        "description": "Active-low hardware reset input. Minimum low pulse of 1 \u00b5s triggers a reset. Internally pulled up to VDD via \u224850 k\u03a9; if unused, leave floating or tie to VDD through a series resistor \u22652 k\u03a9."+        "description": "Active-low hardware reset input. Minimum low pulse of 1 µs triggers a reset. Internally pulled up to VDD via ≈50 kΩ; if unused, leave floating or tie to VDD through a series resistor ≥2 kΩ."       },       {         "number": "7",@@ -104,8 +104,8 @@   "metadata": {     "specs": {       "Type": "I2C humidity + temperature sensor",-      "Humidity accuracy": "\u00b12% RH",-      "Temperature accuracy": "\u00b10.3 \u00b0C",+      "Humidity accuracy": "±2% RH",+      "Temperature accuracy": "±0.3 °C",       "Interface": "I2C up to 1 MHz",       "Addresses": "2 (via ADDR pin)",       "Extras": "programmable ALERT + on-chip heater",@@ -148,5 +148,15 @@     "docs/sht31-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"+  ],+  "variants": [+    {+      "mpn": "SHT31-DIS-B (DFN-8)",+      "kind": "packaging"+    },+    {+      "mpn": "SHT31-DIS-F (with filter membrane)",+      "kind": "packaging"+    }   ] }\ No newline at end of file