sgm811-txka4

@@ -31,5 +31,54 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "SGM811-TXKA4",+    "manufacturer": "SGMICRO",+    "package": "SOT-143",+    "pin_count": 4,+    "category": "Supervisor and Reset ICs",+    "parts": {+      "symbol": "sgm811-txka4.kicad_sym",+      "footprint": "sgm811-txka4.kicad_mod",+      "model_3d": "sgm811-txka4-etched.glb",+      "model_3d_plain": "sgm811-txka4.glb",+      "model_3d_step": "sgm811-txka4-etched.step",+      "model_3d_step_plain": "sgm811-txka4.step",+      "lbr": "sgm811-txka4.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the supervisor. Connect to the system 0V rail."+      },+      {+        "number": "2",+        "name": "RESET",+        "type": "output",+        "description": "Active-low reset logic output (RESET/nRESET). Remains low while VCC is below the reset threshold (3.08V typ for -T variant) or when MR is low; then remains low for at least 150ms (240ms typ) after VCC rises above the reset threshold. Output stays valid down to VCC = 1V."+      },+      {+        "number": "3",+        "name": "MR",+        "type": "input",+        "description": "Manual Reset input (active low, debounced). Ignores input pulses of 100ns or less (typ) and is guaranteed to accept pulses greater than 10us. Internally pulled up to VCC via ~1 MOhm; leave floating when not used."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply voltage that is monitored. Operating range 1.0V-5.5V (0C-70C) or 1.2V-5.5V (-40C-125C). Typical supply current 13uA at VCC < 3.6V for the T variant. Absolute max 6V."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}