← Commit history

Publish 0.1.2

Ray ·5d39652713 · ·parent 138cfdb
4 files changed +288−6
package.json+111−3
@@ -1,6 +1,6 @@ {   "slug": "sgm811-txka4",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "SGMICRO Supervisor and Reset ICs, SOT-143. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -26,6 +26,114 @@     "viewers/symbol.html",     "viewers/footprint.html",     "sgm811-txka4-etched.step",-    "sgm811-txka4-etched.glb"-  ]+    "sgm811-txka4-etched.glb",+    "sgm811-txka4-hero.glb",+    "sgm811-txka4-hero.overlay.json"+  ],+  "component": {+    "mpn": "SGM811-TXKA4",+    "manufacturer": "SGMICRO",+    "package": "SOT-143",+    "pin_count": 4,+    "category": "Supervisor and Reset ICs",+    "parts": {+      "symbol": "sgm811-txka4.kicad_sym",+      "footprint": "sgm811-txka4.kicad_mod",+      "model_3d": "sgm811-txka4-hero.glb",+      "model_3d_plain": "sgm811-txka4.glb",+      "model_3d_step": "sgm811-txka4-etched.step",+      "model_3d_step_plain": "sgm811-txka4.step",+      "lbr": "sgm811-txka4.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the supervisor. Connect to the system 0V rail."+      },+      {+        "number": "2",+        "name": "RESET",+        "type": "output",+        "description": "Active-low reset logic output (RESET/nRESET). Remains low while VCC is below the reset threshold (3.08V typ for -T variant) or when MR is low; then remains low for at least 150ms (240ms typ) after VCC rises above the reset threshold. Output stays valid down to VCC = 1V."+      },+      {+        "number": "3",+        "name": "MR",+        "type": "input",+        "description": "Manual Reset input (active low, debounced). Ignores input pulses of 100ns or less (typ) and is guaranteed to accept pulses greater than 10us. Internally pulled up to VCC via ~1 MOhm; leave floating when not used."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply voltage that is monitored. Operating range 1.0V-5.5V (0C-70C) or 1.2V-5.5V (-40C-125C). Typical supply current 13uA at VCC < 3.6V for the T variant. Absolute max 6V."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "distributor_links": {+      "digikey": false,+      "mouser": false+    },+    "distributor_check": {+      "checked_at": "2026-10-05T19:16:37Z",+      "source": "Component Ocean /api/assign-pns + lcsc_map",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "models_3d": [+      {+        "file": "sgm811-txka4.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.3,+          2.9,+          1.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "b35b433c0dc71ac416a9c731e744d2e0610f82ebe97275830f0e17cdcbe44512",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "sgm811-txka4-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.3,+          2.9,+          1.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "836c593b46b026bcec1b81da54e410f790402b3175089b373b2c72a913f0e287",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public" }
page.json+5−3
@@ -1,6 +1,6 @@ {   "slug": "sgm811-txka4",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "SGMICRO Supervisor and Reset ICs, SOT-143. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -26,7 +26,9 @@     "viewers/symbol.html",     "viewers/footprint.html",     "sgm811-txka4-etched.step",-    "sgm811-txka4-etched.glb"+    "sgm811-txka4-etched.glb",+    "sgm811-txka4-hero.glb",+    "sgm811-txka4-hero.overlay.json"   ],   "visibility": "public",   "author": {@@ -138,4 +140,4 @@     ]   },   "org": "adom"-}+}\ No newline at end of file
sgm811-txka4-hero.glbadded
⋯ 1 unchanged line ⋯
sgm811-txka4-hero.overlay.jsonadded+172
@@ -0,0 +1,172 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "SGM811-TXKA4",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 4,+      "span_mm": 2.9,+      "dash_mm": 0.12,+      "gap_mm": 0.072,+      "pad_stroke_mm": 0.03+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 3,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 4,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.25,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -1.15,+      1.15,+      -1.165,+      1.165+    ],+    "pads_bbox_mm": [+      -1.35,+      1.35,+      -1.25,+      1.25+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "sgm811-txka4-etched.glb",+    "glb_sha256": "2520bc00569962b2e079d009035f0b53a7a2e29cbe45f26858e423dee8e6fefe",+    "footprint": "sgm811-txka4.kicad_mod",+    "footprint_sha256": "80e8edd31fe81e67e7e8d73ca05290c5f8f621cb327e68e5fc836f36975d5b1e",+    "pins": "page.json component.pins",+    "pins_sha256": "9289614e14f52050c99c749ee8d9ce16b3b2444fd6ec0eecd64736a1164361fc"+  },+  "generator": "adom-wiki 1.8.28 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "GND",+      "x": -1.5,+      "y": -0.75,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "RESET",+      "x": -1.5,+      "y": 0.95,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "MR",+      "x": 1.5,+      "y": 0.95,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "VCC",+      "x": 1.5,+      "y": -0.95,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        -0.75+      ],+      "size_mm": [+        0.7,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        0.95+      ],+      "size_mm": [+        0.7,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        0.95+      ],+      "size_mm": [+        0.7,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        -0.95+      ],+      "size_mm": [+        0.7,+        0.6+      ],+      "rot": 0.0+    }+  ]+}