← Commit history
Publish 0.2.1
4 files changed
+420−11
package.json+151−4@@ -1,6 +1,6 @@ { "slug": "sgm706-sys8g",- "version": "0.2.0",+ "version": "0.2.1", "type": "component", "description": "SGMICRO Supervisor and Reset ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -20,10 +20,157 @@ "sgm706-sys8g.kicad_mod", "sgm706-sys8g.glb", "sgm706-sys8g.step",+ "sgm706-sys8g-etched.step", "sgm706-sys8g.lbr", "docs/hero.png", "docs/sgm706-sys8g-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "sgm706-sys8g-hero.glb",+ "sgm706-sys8g-hero.overlay.json"+ ],+ "component": {+ "mpn": "SGM706-SYS8G",+ "manufacturer": "SGMICRO",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "Supervisor and Reset ICs",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6be7035030b24dd7941a534e350fdf0a.pdf",+ "parts": {+ "symbol": "sgm706-sys8g.kicad_sym",+ "footprint": "sgm706-sys8g.kicad_mod",+ "model_3d": "sgm706-sys8g-hero.glb",+ "model_3d_plain": "sgm706-sys8g.glb",+ "model_3d_step": "sgm706-sys8g-etched.step",+ "model_3d_step_plain": "sgm706-sys8g.step",+ "lbr": "sgm706-sys8g.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "MR",+ "type": "input",+ "description": "Active-low Manual-Reset Input. Triggers a reset pulse when pulled below 0.8V. Has an internal ~250µA (VCC = +5V) pull-up current, so it can be driven by TTL/CMOS or shorted to GND via a pushbutton switch."+ },+ {+ "number": "2",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply voltage input that is monitored by the supervisor. Operating range 1.0V to 5.5V; absolute max 6.0V. Typical supply current 50µA (150µA max)."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "0V ground reference for all signals."+ },+ {+ "number": "4",+ "name": "PFI",+ "type": "input",+ "description": "Power-Fail Voltage Monitor Input. Internally compared against a 1.25V reference; when PFI < 1.25V, /PFO goes low. Tie to GND or VCC when unused. Input current ~0.2nA."+ },+ {+ "number": "5",+ "name": "PFO",+ "type": "output",+ "description": "Active-low Power-Fail Output. Sinks current (up to 3.2mA at 0.4V) when PFI < 1.25V; otherwise stays high (VOH ≥ VCC-1.5V at 800µA source). Typically drives a µP NMI/interrupt."+ },+ {+ "number": "6",+ "name": "WDI",+ "type": "input",+ "description": "Watchdog Input. Must see a rising or falling edge within 1.6s (typ) or /WDO asserts. Floating WDI or driving it to a high-impedance three-state disables the watchdog. Input threshold: VIL ≤ 0.8V, VIH ≥ 3.5V at VCC=5V; minimum pulse width 70ns."+ },+ {+ "number": "7",+ "name": "RESET",+ "type": "output",+ "description": "Active-low Reset Output. Pulses low for 200ms (120-280ms) when triggered and stays low while VCC is below the reset threshold (2.93V for SGM706-S variant). Guaranteed valid down to VCC = 1V. Push-pull: VOH ≥ VCC-1.5V at 800µA source, VOL ≤ 0.4V at 3.2mA sink."+ },+ {+ "number": "8",+ "name": "WDO",+ "type": "output",+ "description": "Active-low Watchdog Output. Pulls low when the internal 1.6s watchdog timer expires without a WDI transition, and while VCC is below the reset threshold. Unlike /RESET, /WDO has no minimum pulse width and goes high as soon as VCC recovers. VOL ≤ 0.4V at 1.2mA sink."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/6be7035030b24dd7941a534e350fdf0a.pdf",+ "pages": 12,+ "sha256": "7de9c6e6511b1d05",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sgm706-sys8g.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sgm706-sys8g-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "0be772e85c605a0fedf4eb361eda8d03d48fc2e37a654f7597e61b1b2923b547",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "SGM706-SYS8G",+ "brief": "SGMICRO Supervisor and Reset ICs, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "SGMICRO",+ "Package": "SOIC-8",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "discovery_triggers": [+ "sgm706-sys8g"+ ],+ "discovery_pitch": "SGM706-SYS8G (SGMICRO) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+9−7@@ -4,7 +4,7 @@ "slug": "sgm706-sys8g", "title": "SGM706-SYS8G", "brief": "SGMICRO Supervisor and Reset ICs, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.2.0",+ "version": "0.2.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -179,11 +179,11 @@ "docs/hero.png", "docs/sgm706-sys8g-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "sgm706-sys8g-hero.glb",+ "sgm706-sys8g-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "SGM706-SYS8G/TR",@@ -210,5 +210,7 @@ "kind": "packaging" } ],- "updated_at": "2026-09-25T05:51:15.430Z"-}+ "updated_at": "2026-09-25T05:51:15.430Z",+ "description": "SGMICRO Supervisor and Reset ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}
sgm706-sys8g-hero.glbadded⋯ 1 unchanged line ⋯
sgm706-sys8g-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "SGM706-SYS8G",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "sgm706-sys8g-etched.glb",+ "glb_sha256": "7f1121547567d940ab011bbad9a7f37a150135a5e8d7ad4858e0f5be1009a7b0",+ "footprint": "sgm706-sys8g.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "0f6fea6bcf44ebab6db51b8c614c5e6f9b92654062afba3f7154ef349db8cb05"+ },+ "generator": "adom-wiki 1.8.31 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "MR",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "VCC",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "GND",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "PFI",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "PFO",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "WDI",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "RESET",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "WDO",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}