← Commit history
page.json+10−7@@ -32,13 +32,13 @@ "number": "1", "name": "MR", "type": "input",- "description": "Active-low Manual-Reset Input. Triggers a reset pulse when pulled below 0.8V. Has an internal ~250\u00b5A (VCC = +5V) pull-up current, so it can be driven by TTL/CMOS or shorted to GND via a pushbutton switch."+ "description": "Active-low Manual-Reset Input. Triggers a reset pulse when pulled below 0.8V. Has an internal ~250µA (VCC = +5V) pull-up current, so it can be driven by TTL/CMOS or shorted to GND via a pushbutton switch." }, { "number": "2", "name": "VCC", "type": "power_in",- "description": "Power supply voltage input that is monitored by the supervisor. Operating range 1.0V to 5.5V; absolute max 6.0V. Typical supply current 50\u00b5A (150\u00b5A max)."+ "description": "Power supply voltage input that is monitored by the supervisor. Operating range 1.0V to 5.5V; absolute max 6.0V. Typical supply current 50µA (150µA max)." }, { "number": "3",@@ -56,25 +56,25 @@ "number": "5", "name": "PFO", "type": "output",- "description": "Active-low Power-Fail Output. Sinks current (up to 3.2mA at 0.4V) when PFI < 1.25V; otherwise stays high (VOH \u2265 VCC-1.5V at 800\u00b5A source). Typically drives a \u00b5P NMI/interrupt."+ "description": "Active-low Power-Fail Output. Sinks current (up to 3.2mA at 0.4V) when PFI < 1.25V; otherwise stays high (VOH ≥ VCC-1.5V at 800µA source). Typically drives a µP NMI/interrupt." }, { "number": "6", "name": "WDI", "type": "input",- "description": "Watchdog Input. Must see a rising or falling edge within 1.6s (typ) or /WDO asserts. Floating WDI or driving it to a high-impedance three-state disables the watchdog. Input threshold: VIL \u2264 0.8V, VIH \u2265 3.5V at VCC=5V; minimum pulse width 70ns."+ "description": "Watchdog Input. Must see a rising or falling edge within 1.6s (typ) or /WDO asserts. Floating WDI or driving it to a high-impedance three-state disables the watchdog. Input threshold: VIL ≤ 0.8V, VIH ≥ 3.5V at VCC=5V; minimum pulse width 70ns." }, { "number": "7", "name": "RESET", "type": "output",- "description": "Active-low Reset Output. Pulses low for 200ms (120-280ms) when triggered and stays low while VCC is below the reset threshold (2.93V for SGM706-S variant). Guaranteed valid down to VCC = 1V. Push-pull: VOH \u2265 VCC-1.5V at 800\u00b5A source, VOL \u2264 0.4V at 3.2mA sink."+ "description": "Active-low Reset Output. Pulses low for 200ms (120-280ms) when triggered and stays low while VCC is below the reset threshold (2.93V for SGM706-S variant). Guaranteed valid down to VCC = 1V. Push-pull: VOH ≥ VCC-1.5V at 800µA source, VOL ≤ 0.4V at 3.2mA sink." }, { "number": "8", "name": "WDO", "type": "output",- "description": "Active-low Watchdog Output. Pulls low when the internal 1.6s watchdog timer expires without a WDI transition, and while VCC is below the reset threshold. Unlike /RESET, /WDO has no minimum pulse width and goes high as soon as VCC recovers. VOL \u2264 0.4V at 1.2mA sink."+ "description": "Active-low Watchdog Output. Pulls low when the internal 1.6s watchdog timer expires without a WDI transition, and while VCC is below the reset threshold. Unlike /RESET, /WDO has no minimum pulse width and goes high as soon as VCC recovers. VOL ≤ 0.4V at 1.2mA sink." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/sgm706-sys8g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }