← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# SGM706-SYS8G++**SGMICRO** · Supervisor and Reset ICs · SOIC-8++SGM706-SYS8G from SGMICRO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MR | input | Active-low Manual-Reset Input. Triggers a reset pulse when pulled below 0.8V. Has an internal ~250µA (VCC = +5V) pull-up current, so it can be driven by TTL/CMOS or shorted to GND via a pushbutton switch. |+| 2 | VCC | power_in | Power supply voltage input that is monitored by the supervisor. Operating range 1.0V to 5.5V; absolute max 6.0V. Typical supply current 50µA (150µA max). |+| 3 | GND | power_in | 0V ground reference for all signals. |+| 4 | PFI | input | Power-Fail Voltage Monitor Input. Internally compared against a 1.25V reference; when PFI < 1.25V, /PFO goes low. Tie to GND or VCC when unused. Input current ~0.2nA. |+| 5 | PFO | output | Active-low Power-Fail Output. Sinks current (up to 3.2mA at 0.4V) when PFI < 1.25V; otherwise stays high (VOH ≥ VCC-1.5V at 800µA source). Typically drives a µP NMI/interrupt. |+| 6 | WDI | input | Watchdog Input. Must see a rising or falling edge within 1.6s (typ) or /WDO asserts. Floating WDI or driving it to a high-impedance three-state disables the watchdog. Input threshold: VIL ≤ 0.8V, VIH ≥ 3.5V at VCC=5V; minimum pulse width 70ns. |+| 7 | RESET | output | Active-low Reset Output. Pulses low for 200ms (120-280ms) when triggered and stays low while VCC is below the reset threshold (2.93V for SGM706-S variant). Guaranteed valid down to VCC = 1V. Push-pull: VOH ≥ VCC-1.5V at 800µA source, VOL ≤ 0.4V at 3.2mA sink. |+| 8 | WDO | output | Active-low Watchdog Output. Pulls low when the internal 1.6s watchdog timer expires without a WDI transition, and while VCC is below the reset threshold. Unlike /RESET, /WDO has no minimum pulse width and goes high as soon as VCC recovers. VOL ≤ 0.4V at 1.2mA sink. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SGMICRO |+| Package | SOIC-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `SGM706-SYS8G/TR`+- `SGM706-SYS8GLYS8G/TR`+- `SGM706-SYS8GMYS8G/TR`+- `SGM706-SYS8GJYS8G/TR`+- `SGM706-SYS8GTYS8G/TR`+- `SGM706-SYS8GRYS8G/TR`++## CAD (KiCad official)++- Symbol: `SGM706-SYS8G`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SGMICRO datasheet](docs/sgm706-sys8g-datasheet.pdf) (12 pp, sha256 `7de9c6e6511b1d05`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sgm706-sys8g-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "sgm706-sys8g",+ "version": "0.1.0",+ "type": "component",+ "description": "SGMICRO Supervisor and Reset ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "sgm706-sys8g"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sgm706-sys8g.kicad_sym",+ "sgm706-sys8g.kicad_mod",+ "sgm706-sys8g.glb",+ "sgm706-sys8g.step",+ "sgm706-sys8g.lbr",+ "docs/hero.png",+ "docs/sgm706-sys8g-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}