component
SGM6232YPS8G
Public Made by Adomby adom
SGMICRO DC-DC Converters, SOIC-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -32,13 +32,13 @@ "number": "1", "name": "BS", "type": "passive",- "description": "High-side gate drive boost input. Supplies the driver for the internal high-side N-channel MOSFET. Connect a 10nF or greater capacitor from SW to BS to power the high-side switch. A 10\u03a9 resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage."+ "description": "High-side gate drive boost input. Supplies the driver for the internal high-side N-channel MOSFET. Connect a 10nF or greater capacitor from SW to BS to power the high-side switch. A 10Ω resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage." }, { "number": "2", "name": "IN", "type": "power_in",- "description": "Power input. Supplies the IC and the step-down converter high-side switch. Drive with a 4.5V to 38V source. Bypass to GND with a sufficiently large ceramic capacitor (22\u00b5F typical) to eliminate noise on the input."+ "description": "Power input. Supplies the IC and the step-down converter high-side switch. Drive with a 4.5V to 38V source. Bypass to GND with a sufficiently large ceramic capacitor (22µF typical) to eliminate noise on the input." }, { "number": "3",@@ -56,7 +56,7 @@ "number": "5", "name": "FB", "type": "input",- "description": "Feedback input. Regulated to 0.8V (typ). Connect to the tap of the resistor divider between output and ground to set the output voltage using VOUT = 0.8 \u00d7 (R1+R2)/R2."+ "description": "Feedback input. Regulated to 0.8V (typ). Connect to the tap of the resistor divider between output and ground to set the output voltage using VOUT = 0.8 × (R1+R2)/R2." }, { "number": "6",@@ -68,19 +68,19 @@ "number": "7", "name": "EN", "type": "input",- "description": "Enable input. Digital input that turns the regulator on/off (VIH \u2265 1.2V, VIL \u2264 0.4V). Drive high to enable, low to disable; output is discharged when the IC is off. Leave unconnected for automatic startup (internal 0.8-2\u00b5A pull-up)."+ "description": "Enable input. Digital input that turns the regulator on/off (VIH ≥ 1.2V, VIL ≤ 0.4V). Drive high to enable, low to disable; output is discharged when the IC is off. Leave unconnected for automatic startup (internal 0.8-2µA pull-up)." }, { "number": "8", "name": "SS", "type": "input",- "description": "Soft-start control input. Connect a capacitor from SS to GND to set the soft-start period (tSS = 100k\u03a9 \u00d7 CSS; 0.1\u00b5F \u2192 10ms). Leave unconnected to disable the external soft-start feature."+ "description": "Soft-start control input. Connect a capacitor from SS to GND to set the soft-start period (tSS = 100kΩ × CSS; 0.1µF → 10ms). Leave unconnected to disable the external soft-start feature." }, { "number": "EP", "name": "GND", "type": "power_in",- "description": "Power ground exposed pad on the backside of the SOIC-8 package. Must be connected to the GND plane for proper electrical grounding and thermal performance (\u03b8JA = 50\u00b0C/W)."+ "description": "Power ground exposed pad on the backside of the SOIC-8 package. Must be connected to the GND plane for proper electrical grounding and thermal performance (θJA = 50°C/W)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/sgm6232yps8g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }