component
SGM6132YPS8G
Public Made by Adomby adom
SGMICRO DC-DC Converters, SOIC-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+122−8@@ -1,13 +1,132 @@ {+ "schema_version": 1,+ "type": "component", "slug": "sgm6132yps8g",+ "title": "SGM6132YPS8G",+ "brief": "SGMICRO DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "SGMICRO DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "sgm6132yps8g" ],+ "component": {+ "mpn": "SGM6132YPS8G",+ "manufacturer": "SGMICRO",+ "package": "SOIC-8-EP",+ "pin_count": 9,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a094070cd104491491721bf7d96e10ae.pdf",+ "parts": {+ "symbol": "sgm6132yps8g.kicad_sym",+ "footprint": "sgm6132yps8g.kicad_mod",+ "model_3d": "sgm6132yps8g.glb",+ "model_3d_step": "sgm6132yps8g.step",+ "lbr": "sgm6132yps8g.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "BS",+ "type": "passive",+ "description": "High-side Gate Drive Boost Input. BS supplies the driver for the high-side N-channel MOSFET switch. Connect a 10nF or greater capacitor from SW to BS to bootstrap the high-side switch. A 10\u03a9 resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Power Input. Supplies power to the IC and the step-down converter switches. Drive with a 4.5V to 28.5V source. Bypass IN to GND with a sufficiently large capacitor (22\u00b5F ceramic recommended) to eliminate input noise."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "power_out",+ "description": "Power Switching Output. Switching node that supplies power to the output. Connect the output LC filter from SW to the load. A bootstrap capacitor is required from SW to BS to power the high-side switch."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. The exposed pad on the backside must be connected to pin 4 and tied to the GND plane for proper thermal and electrical performance."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Feedback Input. The voltage at this pin is regulated to 0.8V (typ). Connect to the resistor divider between output and ground to set the output voltage."+ },+ {+ "number": "6",+ "name": "COMP",+ "type": "output",+ "description": "Compensation Node. COMP is used to compensate the regulation control loop. Connect a series RC network from COMP to GND to compensate the loop; in some cases an additional capacitor from COMP to GND is required."+ },+ {+ "number": "7",+ "name": "EN",+ "type": "input",+ "description": "Enable Input. Digital input that turns the regulator on (VIH \u2265 1.2V) or off (VIL \u2264 0.4V). When EN is low the output is discharged and the IC is off. Has an internal ~1.4\u00b5A pull-up current so leaving EN unconnected causes automatic startup."+ },+ {+ "number": "8",+ "name": "SS",+ "type": "passive",+ "description": "Soft-Start Control Input. Connect a capacitor from SS to GND to set the soft-start period; a 0.1\u00b5F capacitor sets \u224810ms soft-start. Leave SS unconnected to disable the soft-start feature."+ },+ {+ "number": "EP",+ "name": "GND",+ "type": "power_in",+ "description": "Power Ground Exposed Pad. Must be connected to the GND plane and tied to pin 4 for thermal dissipation and ground return."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/a094070cd104491491721bf7d96e10ae.pdf",+ "pages": 14,+ "sha256": "d83cfb4e5526354d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "SGMICRO",+ "Package": "SOIC-8-EP",+ "Category": "PMIC",+ "Pins": "9"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "sgm6132yps8g"+ ],+ "discovery_pitch": "SGM6132YPS8G (SGMICRO) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +144,5 @@ "docs/sgm6132yps8g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }