component
SGM6132YPS8G
Public Made by Adomby adom
SGMICRO DC-DC Converters, SOIC-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,13 +32,13 @@ "number": "1", "name": "BS", "type": "passive",- "description": "High-side Gate Drive Boost Input. BS supplies the driver for the high-side N-channel MOSFET switch. Connect a 10nF or greater capacitor from SW to BS to bootstrap the high-side switch. A 10\u03a9 resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage."+ "description": "High-side Gate Drive Boost Input. BS supplies the driver for the high-side N-channel MOSFET switch. Connect a 10nF or greater capacitor from SW to BS to bootstrap the high-side switch. A 10Ω resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage." }, { "number": "2", "name": "IN", "type": "power_in",- "description": "Power Input. Supplies power to the IC and the step-down converter switches. Drive with a 4.5V to 28.5V source. Bypass IN to GND with a sufficiently large capacitor (22\u00b5F ceramic recommended) to eliminate input noise."+ "description": "Power Input. Supplies power to the IC and the step-down converter switches. Drive with a 4.5V to 28.5V source. Bypass IN to GND with a sufficiently large capacitor (22µF ceramic recommended) to eliminate input noise." }, { "number": "3",@@ -68,13 +68,13 @@ "number": "7", "name": "EN", "type": "input",- "description": "Enable Input. Digital input that turns the regulator on (VIH \u2265 1.2V) or off (VIL \u2264 0.4V). When EN is low the output is discharged and the IC is off. Has an internal ~1.4\u00b5A pull-up current so leaving EN unconnected causes automatic startup."+ "description": "Enable Input. Digital input that turns the regulator on (VIH ≥ 1.2V) or off (VIL ≤ 0.4V). When EN is low the output is discharged and the IC is off. Has an internal ~1.4µA pull-up current so leaving EN unconnected causes automatic startup." }, { "number": "8", "name": "SS", "type": "passive",- "description": "Soft-Start Control Input. Connect a capacitor from SS to GND to set the soft-start period; a 0.1\u00b5F capacitor sets \u224810ms soft-start. Leave SS unconnected to disable the soft-start feature."+ "description": "Soft-Start Control Input. Connect a capacitor from SS to GND to set the soft-start period; a 0.1µF capacitor sets ≈10ms soft-start. Leave SS unconnected to disable the soft-start feature." }, { "number": "EP",@@ -144,5 +144,8 @@ "docs/sgm6132yps8g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }