← Commit history
README.mdadded+55@@ -0,0 +1,55 @@+# SGM5018YTS++**SGMICRO** · Analog Switches, Multiplexers · TSSOP-16++SGM5018YTS from SGMICRO, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | input | Digital control input. Selects whether COMx pins connect to NOx (IN = high) or NCx (IN = low) when EN is low. TTL/CMOS compatible; VIH = 1.6 V, VIL = 0.5 V at V+ = 4.5-5.5 V (VIL = 0.4 V at V+ = 2.7-3.6 V). |+| 2 | NC1 | passive | Channel 1 Normally Closed switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM1 when EN = low and IN = low. |+| 3 | NO1 | passive | Channel 1 Normally Open switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM1 when EN = low and IN = high. |+| 4 | COM1 | passive | Channel 1 Common switch pole. Routes to NO1 or NC1 depending on IN state (with EN = low). Typical on-resistance 4.5 Ω at V+ = 4.5 V, ±100 mA. |+| 5 | NC2 | passive | Channel 2 Normally Closed switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM2 when EN = low and IN = low. |+| 6 | NO2 | passive | Channel 2 Normally Open switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM2 when EN = low and IN = high. |+| 7 | COM2 | passive | Channel 2 Common switch pole. Routes to NO2 or NC2 depending on IN state (with EN = low). Typical on-resistance 4.5 Ω at V+ = 4.5 V, ±100 mA. |+| 8 | GND | power_in | Ground reference for the device. Analog signals on NO/NC/COM are referenced to GND; V+ is measured relative to GND (-0.3 V to +6 V absolute maximum). |+| 9 | COM3 | passive | Channel 3 Common switch pole. Routes to NO3 or NC3 depending on IN state (with EN = low). Typical on-resistance 4.5 Ω at V+ = 4.5 V, ±100 mA. |+| 10 | NO3 | passive | Channel 3 Normally Open switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM3 when EN = low and IN = high. |+| 11 | NC3 | passive | Channel 3 Normally Closed switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM3 when EN = low and IN = low. |+| 12 | COM4 | passive | Channel 4 Common switch pole. Routes to NO4 or NC4 depending on IN state (with EN = low). Typical on-resistance 4.5 Ω at V+ = 4.5 V, ±100 mA. |+| 13 | NO4 | passive | Channel 4 Normally Open switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM4 when EN = low and IN = high. |+| 14 | NC4 | passive | Channel 4 Normally Closed switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM4 when EN = low and IN = low. |+| 15 | EN | input | Digital enable control (active-low). Normally connect to GND for switch operation; drive to logic high to force all four switches OFF (all NO/NC disconnected from COM). TTL/CMOS compatible. |+| 16 | V+ | power_in | Positive power supply, 1.8 V to 5.5 V single supply. Absolute maximum 6 V referenced to GND. Supply current typically <1 µA. Bypass with 0.1 µF to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SGMICRO |+| Package | TSSOP-16 |+| Category | Interface |+| Pins | 16 |++## Ordering variants++- `SGM5018YTS/TR`++## CAD (KiCad official)++- Symbol: `SGM5018YTS`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SGMICRO datasheet](docs/sgm5018yts-datasheet.pdf) (None pp, sha256 `bde2d1dafa9a2696`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sgm5018yts-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "sgm5018yts",+ "version": "0.1.0",+ "type": "component",+ "description": "SGMICRO Analog Switches, Multiplexers, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "sgm5018yts"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sgm5018yts.kicad_sym",+ "sgm5018yts.kicad_mod",+ "sgm5018yts.glb",+ "sgm5018yts.step",+ "sgm5018yts.lbr",+ "docs/hero.png",+ "docs/sgm5018yts-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}