← Commit history

Publish 0.1.1

Ray ·45654f54b3 · ·parent cbb477b
2 files changed +199−11
package.json+192−4
@@ -1,6 +1,6 @@ {   "slug": "sgm5018yts",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "SGMICRO Analog Switches, Multiplexers, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -24,6 +24,194 @@     "docs/hero.png",     "docs/sgm5018yts-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "sgm5018yts-etched.step",+    "sgm5018yts-etched.glb"+  ],+  "component": {+    "mpn": "SGM5018YTS",+    "manufacturer": "SGMICRO",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Analog Switches, Multiplexers",+    "parts": {+      "symbol": "sgm5018yts.kicad_sym",+      "footprint": "sgm5018yts.kicad_mod",+      "model_3d": "sgm5018yts-etched.glb",+      "model_3d_plain": "sgm5018yts.glb",+      "model_3d_step": "sgm5018yts-etched.step",+      "model_3d_step_plain": "sgm5018yts.step",+      "lbr": "sgm5018yts.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "input",+        "description": "Digital control input. Selects whether COMx pins connect to NOx (IN = high) or NCx (IN = low) when EN is low. TTL/CMOS compatible; VIH = 1.6 V, VIL = 0.5 V at V+ = 4.5-5.5 V (VIL = 0.4 V at V+ = 2.7-3.6 V)."+      },+      {+        "number": "2",+        "name": "NC1",+        "type": "passive",+        "description": "Channel 1 Normally Closed switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM1 when EN = low and IN = low."+      },+      {+        "number": "3",+        "name": "NO1",+        "type": "passive",+        "description": "Channel 1 Normally Open switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM1 when EN = low and IN = high."+      },+      {+        "number": "4",+        "name": "COM1",+        "type": "passive",+        "description": "Channel 1 Common switch pole. Routes to NO1 or NC1 depending on IN state (with EN = low). Typical on-resistance 4.5 Ω at V+ = 4.5 V, ±100 mA."+      },+      {+        "number": "5",+        "name": "NC2",+        "type": "passive",+        "description": "Channel 2 Normally Closed switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM2 when EN = low and IN = low."+      },+      {+        "number": "6",+        "name": "NO2",+        "type": "passive",+        "description": "Channel 2 Normally Open switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM2 when EN = low and IN = high."+      },+      {+        "number": "7",+        "name": "COM2",+        "type": "passive",+        "description": "Channel 2 Common switch pole. Routes to NO2 or NC2 depending on IN state (with EN = low). Typical on-resistance 4.5 Ω at V+ = 4.5 V, ±100 mA."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device. Analog signals on NO/NC/COM are referenced to GND; V+ is measured relative to GND (-0.3 V to +6 V absolute maximum)."+      },+      {+        "number": "9",+        "name": "COM3",+        "type": "passive",+        "description": "Channel 3 Common switch pole. Routes to NO3 or NC3 depending on IN state (with EN = low). Typical on-resistance 4.5 Ω at V+ = 4.5 V, ±100 mA."+      },+      {+        "number": "10",+        "name": "NO3",+        "type": "passive",+        "description": "Channel 3 Normally Open switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM3 when EN = low and IN = high."+      },+      {+        "number": "11",+        "name": "NC3",+        "type": "passive",+        "description": "Channel 3 Normally Closed switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM3 when EN = low and IN = low."+      },+      {+        "number": "12",+        "name": "COM4",+        "type": "passive",+        "description": "Channel 4 Common switch pole. Routes to NO4 or NC4 depending on IN state (with EN = low). Typical on-resistance 4.5 Ω at V+ = 4.5 V, ±100 mA."+      },+      {+        "number": "13",+        "name": "NO4",+        "type": "passive",+        "description": "Channel 4 Normally Open switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM4 when EN = low and IN = high."+      },+      {+        "number": "14",+        "name": "NC4",+        "type": "passive",+        "description": "Channel 4 Normally Closed switch terminal. Analog signal range 0 V to V+; continuous current on NO/NC/COM limited to ±100 mA. Connected to COM4 when EN = low and IN = low."+      },+      {+        "number": "15",+        "name": "EN",+        "type": "input",+        "description": "Digital enable control (active-low). Normally connect to GND for switch operation; drive to logic high to force all four switches OFF (all NO/NC disconnected from COM). TTL/CMOS compatible."+      },+      {+        "number": "16",+        "name": "V+",+        "type": "power_in",+        "description": "Positive power supply, 1.8 V to 5.5 V single supply. Absolute maximum 6 V referenced to GND. Supply current typically <1 µA. Bypass with 0.1 µF to GND."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "cad_basis": {+        "from": [+          "README CAD section (factory cad_wording)",+          ".kicad_mod model path agrees"+        ],+        "missing": []+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "distributor_links": {+      "digikey": false,+      "mouser": false+    },+    "distributor_check": {+      "checked_at": "2026-10-05T19:16:30Z",+      "source": "Component Ocean /api/assign-pns + lcsc_map",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "models_3d": [+      {+        "file": "sgm5018yts.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5,+          1.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "sgm5018yts-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5,+          1.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "deec258ac574ddacbd846d1162fb8d8e0a8de9a8ace40b53d0a0aa57f8654cab",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public"+}
page.json+7−7
@@ -1,6 +1,6 @@ {   "slug": "sgm5018yts",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "SGMICRO Analog Switches, Multiplexers, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -25,11 +25,10 @@     "docs/sgm5018yts-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "sgm5018yts-etched.step"+    "sgm5018yts-etched.step",+    "sgm5018yts-etched.glb"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "author": {     "name": "Ray"   },@@ -217,5 +216,6 @@         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]-  }-}+  },+  "org": "adom"+}\ No newline at end of file