← Commit history
sgm2202-adjyn6g: factory component page (tier=lcsc)
3 files changed
+22−19
README.md+6−6@@ -8,12 +8,12 @@ SGM2202-ADJYN6G from SGMICRO, in a SOT-23-6. Pinout and pin descriptions extract | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VIN | power_in | Input Supply Voltage Pin. Operating input range 2.7V to 36V (absolute max 44V). Bypass with a 1μF or larger ceramic capacitor placed as close as possible to the pin. |-| 2 | GND | power_in | Ground reference for the regulator. Typical ground pin current is 4.2μA (no load) at +25°C. |-| 3 | EN | input | Enable pin. Drive high (V_IH ≥ 1.2V) to turn on the regulator; drive low (V_IL ≤ 0.4V) to shut it down (I_Q(SHDN) typ 1.5μA). If unused, tie to VIN. Absolute max 44V referenced to GND. |-| 4 | FB | input | Feedback Voltage Input. Connect to the midpoint of an external resistor divider from VOUT to GND to set the output voltage (V_FB typ 0.8V, adjustable output 0.8V to 13.2V). Place the resistors as close to this pin as possible. Absolute max referenced to GND is -0.3V to min(VIN + 0.3V, 6V). |-| 5 | BP | passive | Reference-Noise Bypass Pin. Bypass with an external capacitor C_BP (typ 0.01μF) placed close to the pin to reduce output noise and achieve high PSRR (40dB typ @ 1kHz). Absolute max referenced to GND is -0.3V to min(VIN + 0.3V, 6V). |-| 6 | VOUT | power_out | Regulator Output Pin. Supplies up to 150mA with ±2.5% accuracy at +25°C. Bypass with an effective 1μF to 10μF ceramic capacitor placed very close to the pin. Adjustable output range 0.8V to 13.2V. |+| 1 | VIN | power_in | Input supply voltage pin. Operating input range 2.7V to 36V (absolute max 44V). Bypass with a 1µF or larger ceramic capacitor from VIN to GND placed as close as possible to the pin. |+| 2 | GND | power_in | Ground reference for the regulator. |+| 3 | EN | input | Enable pin. Drive EN high (VIH ≥ 1.2V) to turn on the regulator, drive low (VIL ≤ 0.4V) for shutdown (IQ(SHDN) ≈ 1.5µA). Tie to VIN if enable functionality is not used; do not leave floating. |+| 4 | FB | input | Feedback voltage input for the adjustable version. Connect to the midpoint of an external resistor divider between VOUT and GND to set VOUT = 0.8V × (1 + R1/R2). Reference VFB = 0.8V (typ), IFB ≤ ±15nA. Place divider resistors close to this pin. |+| 5 | BP | passive | Reference-noise bypass pin. Connect an external capacitor CBP (typ 0.01µF) from BP to GND to reduce output noise and improve PSRR (40dB typ @ 1kHz). Absolute max on BP is min(VIN + 0.3V, 6V). Place capacitor close to the pin. |+| 6 | VOUT | power_out | Regulator output pin. Delivers up to 150mA over the adjustable range 0.8V to 13.2V. Bypass with an output capacitor of effective capacitance 1µF to 10µF placed very close to this pin. Absolute max on VOUT is min(VIN + 0.3V, 15V). | ## Key specifications
page.json+7−10@@ -32,37 +32,37 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Input Supply Voltage Pin. Operating input range 2.7V to 36V (absolute max 44V). Bypass with a 1μF or larger ceramic capacitor placed as close as possible to the pin."+ "description": "Input supply voltage pin. Operating input range 2.7V to 36V (absolute max 44V). Bypass with a 1\u00b5F or larger ceramic capacitor from VIN to GND placed as close as possible to the pin." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Ground reference for the regulator. Typical ground pin current is 4.2μA (no load) at +25°C."+ "description": "Ground reference for the regulator." }, { "number": "3", "name": "EN", "type": "input",- "description": "Enable pin. Drive high (V_IH ≥ 1.2V) to turn on the regulator; drive low (V_IL ≤ 0.4V) to shut it down (I_Q(SHDN) typ 1.5μA). If unused, tie to VIN. Absolute max 44V referenced to GND."+ "description": "Enable pin. Drive EN high (VIH \u2265 1.2V) to turn on the regulator, drive low (VIL \u2264 0.4V) for shutdown (IQ(SHDN) \u2248 1.5\u00b5A). Tie to VIN if enable functionality is not used; do not leave floating." }, { "number": "4", "name": "FB", "type": "input",- "description": "Feedback Voltage Input. Connect to the midpoint of an external resistor divider from VOUT to GND to set the output voltage (V_FB typ 0.8V, adjustable output 0.8V to 13.2V). Place the resistors as close to this pin as possible. Absolute max referenced to GND is -0.3V to min(VIN + 0.3V, 6V)."+ "description": "Feedback voltage input for the adjustable version. Connect to the midpoint of an external resistor divider between VOUT and GND to set VOUT = 0.8V \u00d7 (1 + R1/R2). Reference VFB = 0.8V (typ), IFB \u2264 \u00b115nA. Place divider resistors close to this pin." }, { "number": "5", "name": "BP", "type": "passive",- "description": "Reference-Noise Bypass Pin. Bypass with an external capacitor C_BP (typ 0.01μF) placed close to the pin to reduce output noise and achieve high PSRR (40dB typ @ 1kHz). Absolute max referenced to GND is -0.3V to min(VIN + 0.3V, 6V)."+ "description": "Reference-noise bypass pin. Connect an external capacitor CBP (typ 0.01\u00b5F) from BP to GND to reduce output noise and improve PSRR (40dB typ @ 1kHz). Absolute max on BP is min(VIN + 0.3V, 6V). Place capacitor close to the pin." }, { "number": "6", "name": "VOUT", "type": "power_out",- "description": "Regulator Output Pin. Supplies up to 150mA with ±2.5% accuracy at +25°C. Bypass with an effective 1μF to 10μF ceramic capacitor placed very close to the pin. Adjustable output range 0.8V to 13.2V."+ "description": "Regulator output pin. Delivers up to 150mA over the adjustable range 0.8V to 13.2V. Bypass with an output capacitor of effective capacitance 1\u00b5F to 10\u00b5F placed very close to this pin. Absolute max on VOUT is min(VIN + 0.3V, 15V)." } ], "provenance": {@@ -126,8 +126,5 @@ "docs/sgm2202-adjyn6g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }
sgm2202-adjyn6g.lbr+9−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>SGMICRO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-6</description> <packages> <package name="SOT-23-6"> <description>6 pads, 3.6 x 2.5 mm. SOT, 6 Pin</description>@@ -84,6 +84,7 @@ </packages> <symbols> <symbol name="SGM2202-ADJYN6G">+ <description>SGMICRO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-6</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -100,7 +101,7 @@ </symbols> <devicesets> <deviceset name="SGM2202-ADJYN6G" prefix="U">- <description></description>+ <description>SGMICRO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-6</description> <gates> <gate name="G$1" symbol="SGM2202-ADJYN6G" x="0" y="0"/> </gates>@@ -114,7 +115,12 @@ <connect gate="G$1" pin="BP" pad="5"/> <connect gate="G$1" pin="FB" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="SGM2202-ADJYN6G" constant="no"/>+ <attribute name="MANUFACTURER" value="SGMICRO" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>