← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input Supply Voltage Pin. Operating range 1.1V to 5.5V (1.4V min at IOUT = 300mA). Absolute maximum -0.3V to 6V. Requires a 1\u03bcF or larger ceramic decoupling capacitor to GND placed close to the pin."+ "description": "Input Supply Voltage Pin. Operating range 1.1V to 5.5V (1.4V min at IOUT = 300mA). Absolute maximum -0.3V to 6V. Requires a 1μF or larger ceramic decoupling capacitor to GND placed close to the pin." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable Pin. Drive high (VIH \u2265 0.7V) to enable the regulator, low (VIL \u2264 0.3V) to disable. Internal 0.03\u03bcA pull-down current source ensures the device is off when EN is floated. Tie to IN if enable is not used."+ "description": "Enable Pin. Drive high (VIH ≥ 0.7V) to enable the regulator, low (VIL ≤ 0.3V) to disable. Internal 0.03μA pull-down current source ensures the device is off when EN is floated. Tie to IN if enable is not used." }, { "number": "4", "name": "FB", "type": "input",- "description": "Feedback Voltage Input Pin (adjustable version, SGM2059-ADJ). Connect to the midpoint of an external resistor divider from OUT to GND to set the output voltage. Internal reference VFB = 0.793V (typ), giving VOUT = 0.793V \u00d7 (1 + R1/R2), adjustable from 0.793V to 5.0V. Place divider resistors close to this pin."+ "description": "Feedback Voltage Input Pin (adjustable version, SGM2059-ADJ). Connect to the midpoint of an external resistor divider from OUT to GND to set the output voltage. Internal reference VFB = 0.793V (typ), giving VOUT = 0.793V × (1 + R1/R2), adjustable from 0.793V to 5.0V. Place divider resistors close to this pin." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulator Output Pin. Supplies up to 300mA with 72mV typ dropout (VOUT = 2.8V, 300mA). Requires 0.5\u03bcF to 10\u03bcF effective output capacitance for stability, placed close to the pin. Includes automatic output discharge (~50\u03a9) when disabled."+ "description": "Regulator Output Pin. Supplies up to 300mA with 72mV typ dropout (VOUT = 2.8V, 300mA). Requires 0.5μF to 10μF effective output capacitance for stability, placed close to the pin. Includes automatic output discharge (~50Ω) when disabled." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/sgm2059-adjxn5g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }