← Commit history
Publish 0.2.1
4 files changed
+336−11
package.json+133−4@@ -1,6 +1,6 @@ { "slug": "sgm2059-adjxn5g",- "version": "0.2.0",+ "version": "0.2.1", "type": "component", "description": "SGMICRO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -20,10 +20,139 @@ "sgm2059-adjxn5g.kicad_mod", "sgm2059-adjxn5g.glb", "sgm2059-adjxn5g.step",+ "sgm2059-adjxn5g-etched.step", "sgm2059-adjxn5g.lbr", "docs/hero.png", "docs/sgm2059-adjxn5g-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "sgm2059-adjxn5g-hero.glb",+ "sgm2059-adjxn5g-hero.overlay.json"+ ],+ "component": {+ "mpn": "SGM2059-ADJXN5G",+ "manufacturer": "SGMICRO",+ "package": "SOT-23-5",+ "pin_count": 5,+ "category": "PMIC",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302061830_SGMICRO-SGM2059-ADJXN5G-TR_C5152783.pdf",+ "parts": {+ "symbol": "sgm2059-adjxn5g.kicad_sym",+ "footprint": "sgm2059-adjxn5g.kicad_mod",+ "model_3d": "sgm2059-adjxn5g-hero.glb",+ "model_3d_plain": "sgm2059-adjxn5g.glb",+ "model_3d_step": "sgm2059-adjxn5g-etched.step",+ "model_3d_step_plain": "sgm2059-adjxn5g.step",+ "lbr": "sgm2059-adjxn5g.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input Supply Voltage Pin. Operating range 1.1V to 5.5V (1.4V min at IOUT = 300mA). Absolute maximum -0.3V to 6V. Requires a 1μF or larger ceramic decoupling capacitor to GND placed close to the pin."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return pin for the regulator."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Enable Pin. Drive high (VIH ≥ 0.7V) to enable the regulator, low (VIL ≤ 0.3V) to disable. Internal 0.03μA pull-down current source ensures the device is off when EN is floated. Tie to IN if enable is not used."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback Voltage Input Pin (adjustable version, SGM2059-ADJ). Connect to the midpoint of an external resistor divider from OUT to GND to set the output voltage. Internal reference VFB = 0.793V (typ), giving VOUT = 0.793V × (1 + R1/R2), adjustable from 0.793V to 5.0V. Place divider resistors close to this pin."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulator Output Pin. Supplies up to 300mA with 72mV typ dropout (VOUT = 2.8V, 300mA). Requires 0.5μF to 10μF effective output capacitance for stability, placed close to the pin. Includes automatic output discharge (~50Ω) when disabled."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302061830_SGMICRO-SGM2059-ADJXN5G-TR_C5152783.pdf",+ "pages": 16,+ "sha256": "fe1698796ffc7db1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sgm2059-adjxn5g.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sgm2059-adjxn5g-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "33afc12589ed7928dd0d75bfb351c632ef65f4154af25a90d2dd2b79a1ad2e60",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "SGM2059-ADJXN5G",+ "brief": "SGMICRO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "SGMICRO",+ "Package": "SOT-23-5",+ "Category": "PMIC",+ "Pins": "5"+ }+ },+ "discovery_triggers": [+ "sgm2059-adjxn5g"+ ],+ "discovery_pitch": "SGM2059-ADJXN5G (SGMICRO) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+9−7@@ -4,7 +4,7 @@ "slug": "sgm2059-adjxn5g", "title": "SGM2059-ADJXN5G", "brief": "SGMICRO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.2.0",+ "version": "0.2.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -161,11 +161,11 @@ "docs/hero.png", "docs/sgm2059-adjxn5g-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "sgm2059-adjxn5g-hero.glb",+ "sgm2059-adjxn5g-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "SGM2059-ADJXN5G/TR",@@ -176,5 +176,7 @@ "kind": "unknown" } ],- "updated_at": "2026-09-25T05:47:38.768Z"-}+ "updated_at": "2026-09-25T05:47:38.768Z",+ "description": "SGMICRO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}
sgm2059-adjxn5g-hero.glbadded⋯ 1 unchanged line ⋯
sgm2059-adjxn5g-hero.overlay.jsonadded+194@@ -0,0 +1,194 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "SGM2059-ADJXN5G",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 5,+ "span_mm": 3.6,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 8,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 5,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.288,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.4,+ 1.4,+ -1.2,+ 1.2+ ],+ "pads_bbox_mm": [+ -1.8,+ 1.8,+ -1.25,+ 1.25+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "sgm2059-adjxn5g-etched.glb",+ "glb_sha256": "14b65db30a8b276bbb5155eb43240e0a13dc656c32e02eadf866de84e6d7641b",+ "footprint": "sgm2059-adjxn5g.kicad_mod",+ "footprint_sha256": "455a3f7c3e5eb5b8847eaa5df23e18651e78ab9f75afd09a0883758a0d901761",+ "pins": "page.json component.pins",+ "pins_sha256": "d081929c67d78e6966db5e9a82e007553cbd3ee21cf236941ff89fd9c5873fdd"+ },+ "generator": "adom-wiki 1.8.28 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "IN",+ "x": -1.919,+ "y": -0.95,+ "align": "right",+ "vertical": false,+ "h": 0.475+ },+ {+ "pad": "2",+ "text": "GND",+ "x": -1.919,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.475+ },+ {+ "pad": "3",+ "text": "EN",+ "x": -1.919,+ "y": 0.95,+ "align": "right",+ "vertical": false,+ "h": 0.475+ },+ {+ "pad": "4",+ "text": "FB",+ "x": 1.95,+ "y": 0.95,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "OUT",+ "x": 1.95,+ "y": -0.95,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -1.1375,+ -0.95+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -1.1375,+ 0.0+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -1.1375,+ 0.95+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ 1.1375,+ 0.95+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 1.1375,+ -0.95+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}