← Commit history

Set visibility: public

Ray ·b5f6599cf8 · ·parent d2bfa5b
1 file changed +10−7
page.json+10−7
@@ -38,13 +38,13 @@         "number": "2",         "name": "VLDOIN",         "type": "power_in",-        "description": "Regulator Supply Voltage Pin (1.1V to 3.5V). Provides the input power to the LDO output stage. Recommended to use a ceramic capacitor with minimum effective capacitance of 15\u00b5F from VLDOIN to ground."+        "description": "Regulator Supply Voltage Pin (1.1V to 3.5V). Provides the input power to the LDO output stage. Recommended to use a ceramic capacitor with minimum effective capacitance of 15µF from VLDOIN to ground."       },       {         "number": "3",         "name": "VO",         "type": "power_out",-        "description": "Regulator Output Pin. Sinks and sources current to hold the DDR termination rail at REFOUT. Recommended output capacitor effective capacitance is 20\u00b5F to 100\u00b5F."+        "description": "Regulator Output Pin. Sinks and sources current to hold the DDR termination rail at REFOUT. Recommended output capacitor effective capacitance is 20µF to 100µF."       },       {         "number": "4",@@ -62,13 +62,13 @@         "number": "6",         "name": "REFOUT",         "type": "output",-        "description": "Buffered Reference Output Pin (\u00b110mA). Buffers REFIN and provides the reference used by the VO regulator loop. Recommended output capacitor effective capacitance is 0.1\u00b5F to 1\u00b5F."+        "description": "Buffered Reference Output Pin (±10mA). Buffers REFIN and provides the reference used by the VO regulator loop. Recommended output capacitor effective capacitance is 0.1µF to 1µF."       },       {         "number": "7",         "name": "EN",         "type": "input",-        "description": "Enable Pin. Drive EN high (\u22651V) to turn on the regulator; drive EN low (\u22640.5V) to shut down. When EN is below 0.3V the internal discharge path pulls VO down."+        "description": "Enable Pin. Drive EN high (≥1V) to turn on the regulator; drive EN low (≤0.5V) to shut down. When EN is below 0.3V the internal discharge path pulls VO down."       },       {         "number": "8",@@ -80,13 +80,13 @@         "number": "9",         "name": "PGOOD",         "type": "output",-        "description": "Power-Good Indicator Output Pin. Open-drain output that is active high (via external pull-up) when the VO/VOSNS voltage is within the \u00b120% PGOOD window around REFOUT. Requires an external pull-up resistor (e.g. 100k\u03a9 to VIN)."+        "description": "Power-Good Indicator Output Pin. Open-drain output that is active high (via external pull-up) when the VO/VOSNS voltage is within the ±20% PGOOD window around REFOUT. Requires an external pull-up resistor (e.g. 100kΩ to VIN)."       },       {         "number": "10",         "name": "VIN",         "type": "power_in",-        "description": "Input Voltage Supply Pin (2.375V to 3.5V). Powers the control circuitry. Recommended to use a ceramic capacitor with minimum effective capacitance of 1\u00b5F from VIN to ground."+        "description": "Input Voltage Supply Pin (2.375V to 3.5V). Powers the control circuitry. Recommended to use a ceramic capacitor with minimum effective capacitance of 1µF from VIN to ground."       },       {         "number": "EP",@@ -162,5 +162,8 @@     "docs/sgm2054xtd10g-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file