SG3525ANG

@@ -26,13 +26,15 @@       "model_3d_step": "sg3525ang.step",       "lbr": "sg3525ang.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C5286"+    },     "pins": [       {         "number": "1",         "name": "Inv. Input",         "type": "input",-        "description": "Inverting input of the internal error amplifier. Common-mode input range includes the +5.1 V reference so no external divider is required. Input bias current ~1 µA typ."+        "description": "Inverting input of the internal error amplifier. Common-mode input range includes the +5.1 V reference so no external divider is required. Input bias current ~1 \u00b5A typ."       },       {         "number": "2",@@ -50,49 +52,49 @@         "number": "4",         "name": "OSC. Output",         "type": "output",-        "description": "Oscillator clock output. Provides the internal clock signal (~3.5 V amplitude, 0.3-1.0 µs pulse width) for external synchronization or monitoring."+        "description": "Oscillator clock output. Provides the internal clock signal (~3.5 V amplitude, 0.3-1.0 \u00b5s pulse width) for external synchronization or monitoring."       },       {         "number": "5",         "name": "CT",         "type": "passive",-        "description": "Oscillator timing capacitor connection. External CT (0.001-0.2 µF) sets oscillator charge time together with RT. Frequency range 100 Hz to 400 kHz."+        "description": "Oscillator timing capacitor connection. External CT (0.001-0.2 \u00b5F) sets oscillator charge time together with RT. Frequency range 100 Hz to 400 kHz."       },       {         "number": "6",         "name": "RT",         "type": "passive",-        "description": "Oscillator timing resistor connection. External RT (2.0-150 kΩ) sets the oscillator charging current."+        "description": "Oscillator timing resistor connection. External RT (2.0-150 k\u03a9) sets the oscillator charging current."       },       {         "number": "7",         "name": "Discharge",         "type": "passive",-        "description": "Deadtime programming pin. A resistor RD (0-500 Ω) between CT (pin 5) and Discharge (pin 7) sets the oscillator discharge/deadtime."+        "description": "Deadtime programming pin. A resistor RD (0-500 \u03a9) between CT (pin 5) and Discharge (pin 7) sets the oscillator discharge/deadtime."       },       {         "number": "8",         "name": "Soft-Start",         "type": "passive",-        "description": "Soft-start capacitor connection. An external capacitor charged by an internal ~50 µA source implements soft-start of the PWM duty cycle. Can also accept a pull-down (~100 µA) to disable outputs."+        "description": "Soft-start capacitor connection. An external capacitor charged by an internal ~50 \u00b5A source implements soft-start of the PWM duty cycle. Can also accept a pull-down (~100 \u00b5A) to disable outputs."       },       {         "number": "9",         "name": "Compensation",         "type": "output",-        "description": "Error amplifier output / PWM comparator input. Compensation network is tied here to shape the loop response. Also accepts a pull-down (~100 µA) to force outputs off."+        "description": "Error amplifier output / PWM comparator input. Compensation network is tied here to shape the loop response. Also accepts a pull-down (~100 \u00b5A) to force outputs off."       },       {         "number": "10",         "name": "Shutdown",         "type": "input",-        "description": "Active-high shutdown. Positive signal immediately sets the PWM latch (fast turn-off) and enables a 150 µA sink that discharges the soft-start cap for extended shutdowns. Should not be left floating."+        "description": "Active-high shutdown. Positive signal immediately sets the PWM latch (fast turn-off) and enables a 150 \u00b5A sink that discharges the soft-start cap for extended shutdowns. Should not be left floating."       },       {         "number": "11",         "name": "Output A",         "type": "output",-        "description": "Totem-pole PWM output A. Sources/sinks up to ±100 mA steady state, ±400 mA peak. Alternates with Output B on successive oscillator cycles; NOR-logic low in off-state."+        "description": "Totem-pole PWM output A. Sources/sinks up to \u00b1100 mA steady state, \u00b1400 mA peak. Alternates with Output B on successive oscillator cycles; NOR-logic low in off-state."       },       {         "number": "12",@@ -110,7 +112,7 @@         "number": "14",         "name": "Output B",         "type": "output",-        "description": "Totem-pole PWM output B. Complements Output A (alternates each oscillator cycle). Sources/sinks up to ±100 mA steady state, ±400 mA peak."+        "description": "Totem-pole PWM output B. Complements Output A (alternates each oscillator cycle). Sources/sinks up to \u00b1100 mA steady state, \u00b1400 mA peak."       },       {         "number": "15",@@ -122,7 +124,7 @@         "number": "16",         "name": "Vref",         "type": "power_out",-        "description": "Internal +5.1 V reference output, trimmed to ±1%. Sources up to 20 mA of load current; short-circuit limited to ~80 mA. Bypass to ground with a small ceramic (typ 0.1 µF)."+        "description": "Internal +5.1 V reference output, trimmed to \u00b11%. Sources up to 20 mA of load current; short-circuit limited to ~80 mA. Bypass to ground with a small ceramic (typ 0.1 \u00b5F)."       }     ],     "provenance": {