← Commit history
page.json+13−10@@ -32,7 +32,7 @@ "number": "1", "name": "Inv. Input", "type": "input",- "description": "Inverting input of the on-chip error amplifier. Common-mode range 1.5 V to 5.2 V (covers the internal Vref = 5.1 V so no external resistor divider is required for reference-based feedback). Input offset 2 mV typ, input bias 1 \u00b5A typ."+ "description": "Inverting input of the on-chip error amplifier. Common-mode range 1.5 V to 5.2 V (covers the internal Vref = 5.1 V so no external resistor divider is required for reference-based feedback). Input offset 2 mV typ, input bias 1 µA typ." }, { "number": "2",@@ -56,25 +56,25 @@ "number": "5", "name": "CT", "type": "passive",- "description": "Oscillator timing capacitor connection. Recommended range 0.001 \u00b5F to 0.2 \u00b5F. Together with RT and RD sets oscillator frequency (100 Hz to 400 kHz)."+ "description": "Oscillator timing capacitor connection. Recommended range 0.001 µF to 0.2 µF. Together with RT and RD sets oscillator frequency (100 Hz to 400 kHz)." }, { "number": "6", "name": "RT", "type": "passive",- "description": "Oscillator timing resistor connection. Recommended range 2.0 k\u03a9 to 150 k\u03a9. Sets oscillator charging current (2.0 mA typ at IRT = 2.0 mA)."+ "description": "Oscillator timing resistor connection. Recommended range 2.0 kΩ to 150 kΩ. Sets oscillator charging current (2.0 mA typ at IRT = 2.0 mA)." }, { "number": "7", "name": "Discharge", "type": "passive",- "description": "Oscillator discharge / dead-time pin. External resistor RD (0 to 500 \u03a9) between CT (pin 5) and Discharge sets the dead-time (blanking interval) between the two outputs."+ "description": "Oscillator discharge / dead-time pin. External resistor RD (0 to 500 Ω) between CT (pin 5) and Discharge sets the dead-time (blanking interval) between the two outputs." }, { "number": "8", "name": "Soft-Start", "type": "passive",- "description": "Soft-start capacitor connection. Internal 50 \u00b5A current source charges an external capacitor at power-up to ramp the PWM duty cycle from 0 % to maximum, giving controlled start-up. Soft-start current 25-80 \u00b5A (50 \u00b5A typ)."+ "description": "Soft-start capacitor connection. Internal 50 µA current source charges an external capacitor at power-up to ramp the PWM duty cycle from 0 % to maximum, giving controlled start-up. Soft-start current 25-80 µA (50 µA typ)." }, { "number": "9",@@ -86,13 +86,13 @@ "number": "10", "name": "Shutdown", "type": "input",- "description": "Active-high shutdown input. A high level (>2.0 V) immediately latches both outputs off via the PWM latch and begins discharging the soft-start capacitor (~100 \u00b5A). Should not be left floating due to noise-coupling risk. Input current 0.4 mA typ at 2.5 V."+ "description": "Active-high shutdown input. A high level (>2.0 V) immediately latches both outputs off via the PWM latch and begins discharging the soft-start capacitor (~100 µA). Should not be left floating due to noise-coupling risk. Input current 0.4 mA typ at 2.5 V." }, { "number": "11", "name": "Output A", "type": "output",- "description": "Totem-pole PWM output A (one of two alternating outputs). \u00b1400 mA peak drive; VOH \u2248 18 V and VOL \u2248 0.2 V at 20 mA (VCC = 20 V). Rise/fall times ~100/50 ns typ into 1 nF. Drives MOSFET gates or bipolar bases directly."+ "description": "Totem-pole PWM output A (one of two alternating outputs). ±400 mA peak drive; VOH ≈ 18 V and VOL ≈ 0.2 V at 20 mA (VCC = 20 V). Rise/fall times ~100/50 ns typ into 1 nF. Drives MOSFET gates or bipolar bases directly." }, { "number": "12",@@ -110,7 +110,7 @@ "number": "14", "name": "Output B", "type": "output",- "description": "Totem-pole PWM output B (alternates with Output A each oscillator cycle). \u00b1400 mA peak drive; same VOH/VOL and switching characteristics as Output A."+ "description": "Totem-pole PWM output B (alternates with Output A each oscillator cycle). ±400 mA peak drive; same VOH/VOL and switching characteristics as Output A." }, { "number": "15",@@ -122,7 +122,7 @@ "number": "16", "name": "Vref", "type": "power_out",- "description": "Internal 5.1 V \u00b1 1 % voltage reference output. Rated 0-20 mA load; short-circuit current 80 mA typ. Bypass with 0.1 \u00b5F to ground; may be tied to error-amp input for reference-based feedback."+ "description": "Internal 5.1 V ± 1 % voltage reference output. Rated 0-20 mA load; short-circuit current 80 mA typ. Bypass with 0.1 µF to ground; may be tied to error-amp input for reference-based feedback." } ], "provenance": {@@ -200,5 +200,8 @@ "docs/sg3525a-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }