← Commit history

Set visibility: public

Ray ·e1a36d07f5 · ·parent ca1371f
1 file changed +10−7
page.json+10−7
@@ -38,7 +38,7 @@         "number": "2",         "name": "Noninv. Input",         "type": "input",-        "description": "Non-inverting input of the internal error amplifier. Typical input offset 1.5 mV, bias current 1 \u00b5A, CMRR 90 dB."+        "description": "Non-inverting input of the internal error amplifier. Typical input offset 1.5 mV, bias current 1 µA, CMRR 90 dB."       },       {         "number": "3",@@ -50,19 +50,19 @@         "number": "4",         "name": "OSC. Output",         "type": "output",-        "description": "Oscillator clock output. Provides the internal clock signal (typ 3 V amplitude, 0.6 \u00b5s width) for external use or scope monitoring."+        "description": "Oscillator clock output. Provides the internal clock signal (typ 3 V amplitude, 0.6 µs width) for external use or scope monitoring."       },       {         "number": "5",         "name": "CT",         "type": "passive",-        "description": "Oscillator timing capacitor. Combined with RT (pin 6) sets the switching frequency (100 Hz-500 kHz range). Typical charging current 50 \u00b5A."+        "description": "Oscillator timing capacitor. Combined with RT (pin 6) sets the switching frequency (100 Hz-500 kHz range). Typical charging current 50 µA."       },       {         "number": "6",         "name": "RT",         "type": "passive",-        "description": "Oscillator timing resistor. Sets the oscillator charge current; typical range 2 k\u03a9 (430 kHz) to 200 k\u03a9 (60 Hz-120 Hz) with the corresponding CT."+        "description": "Oscillator timing resistor. Sets the oscillator charge current; typical range 2 kΩ (430 kHz) to 200 kΩ (60 Hz-120 Hz) with the corresponding CT."       },       {         "number": "7",@@ -74,7 +74,7 @@         "number": "8",         "name": "Soft-Start",         "type": "passive",-        "description": "Soft-start capacitor pin. An internal 50 \u00b5A current source charges the external capacitor to ramp up the duty cycle at startup. Typical soft-start current 51 \u00b5A."+        "description": "Soft-start capacitor pin. An internal 50 µA current source charges the external capacitor to ramp up the duty cycle at startup. Typical soft-start current 51 µA."       },       {         "number": "9",@@ -122,7 +122,7 @@         "number": "16",         "name": "Vref",         "type": "power_out",-        "description": "5.1 V \u00b11% precision reference output. Short-circuit current typ 80 mA (limit 100 mA); intended for biasing external circuitry, decouple with ~0.1 \u00b5F to ground."+        "description": "5.1 V ±1% precision reference output. Short-circuit current typ 80 mA (limit 100 mA); intended for biasing external circuitry, decouple with ~0.1 µF to ground."       }     ],     "provenance": {@@ -186,5 +186,8 @@     "docs/sg3525-hxy-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file