← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "sg3525-hxy",+ "title": "SG3525-HXY",+ "brief": "HXY MOSFET AC-DC Controllers and Regulators, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "HXY MOSFET AC-DC Controllers and Regulators, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "sg3525-hxy" ],+ "component": {+ "mpn": "SG3525-HXY",+ "manufacturer": "HXY MOSFET",+ "package": "SOP-16",+ "pin_count": 16,+ "category": "PMIC",+ "subcategory": "AC-DC Controllers and Regulators",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2306151053_HXY-MOSFET-SG3525-HXY_C7427360.pdf",+ "parts": {+ "symbol": "sg3525-hxy.kicad_sym",+ "footprint": "sg3525-hxy.kicad_mod",+ "model_3d": "sg3525-hxy.glb",+ "model_3d_step": "sg3525-hxy.step",+ "lbr": "sg3525-hxy.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "Inv. Input",+ "type": "input",+ "description": "Inverting input of the internal error amplifier. Common-mode range includes the 5.1 V reference so no external divider is required when regulating to VREF."+ },+ {+ "number": "2",+ "name": "Noninv. Input",+ "type": "input",+ "description": "Non-inverting input of the internal error amplifier. Typical input offset 1.5 mV, bias current 1 \u00b5A, CMRR 90 dB."+ },+ {+ "number": "3",+ "name": "Sync",+ "type": "bidirectional",+ "description": "Oscillator sync input/output for master/slave operation or synchronization with an external clock. Sync threshold typ 2 V; sync input current typ 1.3 mA at 3.5 V."+ },+ {+ "number": "4",+ "name": "OSC. Output",+ "type": "output",+ "description": "Oscillator clock output. Provides the internal clock signal (typ 3 V amplitude, 0.6 \u00b5s width) for external use or scope monitoring."+ },+ {+ "number": "5",+ "name": "CT",+ "type": "passive",+ "description": "Oscillator timing capacitor. Combined with RT (pin 6) sets the switching frequency (100 Hz-500 kHz range). Typical charging current 50 \u00b5A."+ },+ {+ "number": "6",+ "name": "RT",+ "type": "passive",+ "description": "Oscillator timing resistor. Sets the oscillator charge current; typical range 2 k\u03a9 (430 kHz) to 200 k\u03a9 (60 Hz-120 Hz) with the corresponding CT."+ },+ {+ "number": "7",+ "name": "Discharge",+ "type": "passive",+ "description": "Deadtime/discharge pin. A resistor between CT (pin 5) and Discharge sets the oscillator discharge time, which controls the deadtime between the A and B outputs."+ },+ {+ "number": "8",+ "name": "Soft-Start",+ "type": "passive",+ "description": "Soft-start capacitor pin. An internal 50 \u00b5A current source charges the external capacitor to ramp up the duty cycle at startup. Typical soft-start current 51 \u00b5A."+ },+ {+ "number": "9",+ "name": "Compensation",+ "type": "output",+ "description": "Error amplifier output and PWM comparator input. Loop compensation network (typically a resistor and capacitor to Inv. Input) is connected here."+ },+ {+ "number": "10",+ "name": "Shutdown",+ "type": "input",+ "description": "Active-high shutdown input. Threshold typ 0.8 V (min 0.6 V, max 1 V). Asserting shutdown initiates the pulse-by-pulse latch-off, discharges the soft-start capacitor, and disables both outputs."+ },+ {+ "number": "11",+ "name": "Output A",+ "type": "output",+ "description": "Push-pull totem-pole gate driver output A. Sources/sinks >200 mA (500 mA absolute max). Alternates with Output B; typ rise/fall 80 ns / 70 ns into 1 nF."+ },+ {+ "number": "12",+ "name": "Ground",+ "type": "power_in",+ "description": "Signal and power ground return for the device."+ },+ {+ "number": "13",+ "name": "VC",+ "type": "power_in",+ "description": "Collector supply for the output driver stage. Rated 40 V absolute maximum; usually tied to VCC but can be biased separately to drive gates from a different rail."+ },+ {+ "number": "14",+ "name": "Output B",+ "type": "output",+ "description": "Push-pull totem-pole gate driver output B. Complementary phase to Output A for push-pull / half-bridge / full-bridge topologies. Same drive spec as Output A."+ },+ {+ "number": "15",+ "name": "VCC",+ "type": "power_in",+ "description": "Main supply input. Operating range 8-35 V; 40 V absolute maximum. UVLO turns the device on around 7 V typical (6-8 V) with hysteresis. Typical ICC 12 mA."+ },+ {+ "number": "16",+ "name": "Vref",+ "type": "power_out",+ "description": "5.1 V \u00b11% precision reference output. Short-circuit current typ 80 mA (limit 100 mA); intended for biasing external circuitry, decouple with ~0.1 \u00b5F to ground."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2306151053_HXY-MOSFET-SG3525-HXY_C7427360.pdf",+ "pages": 7,+ "sha256": "523bdd7216fb17e2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "HXY MOSFET",+ "Package": "SOP-16",+ "Category": "PMIC",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "sg3525-hxy"+ ],+ "discovery_pitch": "SG3525-HXY (HXY MOSFET) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/sg3525-hxy-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }