← Commit history
README.mdadded+55@@ -0,0 +1,55 @@+# SE9450-HF++**Seaward Elec** · Battery Management · ESOP-8++SE9450-HF from Seaward Elec, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TEMP | input | Battery temperature sense input. Connect to the divider between VCC and an external NTC thermistor. Charging is suspended when V(TEMP) < 45%*Vcc or V(TEMP) > 80%*Vcc. Tying TEMP to GND disables the temperature-monitoring function while leaving other functions operational. |+| 2 | PROG | passive | Charge-current program and monitor pin. A resistor R_PROG from PROG to GND sets the constant charge current (I_BAT = 1000/R_PROG, giving 1A at R_PROG = 1kΩ). Pin sits at ~1.0V in current mode; C/10 termination is detected when PROG drops below ~100mV. |+| 3 | GND | power_in | Device ground / power return. |+| 4 | VCC | power_in | Positive supply input for the charger. Recommended operating range 4.5V to 25V; absolute maximum 28V. Internal OVP disables the charger above 6.5V (rising) with 200mV hysteresis; UVLO threshold ~3.7V rising. |+| 5 | BAT | power_out | Battery connection. Charging current is delivered through this pin from the internal PMOS pass device; float voltage is 4.2V (A suffix) or 4.35V (C suffix) with ±1% accuracy, and IBAT can reach 1A. Absolute max 11V; drives <2uA leakage into the battery when VCC is removed. |+| 6 | STDBY | output | Charge-complete indicator (open-drain). Pulled low when the charge cycle has terminated (C/10 detected); high-impedance in all other states. Vol ≤ 0.4V at 5mA sink. |+| 7 | CHRG | output | Charge-in-progress indicator (open-drain). Pulled low while the charger is actively delivering current; high-impedance otherwise. Flashes at ~1-4s when a fault (missing battery) is detected with a 10uF cap at BAT. Vol ≤ 0.4V at 5mA sink. |+| 8 | CE | input | Chip enable input. Drive high to enable normal charger operation; drive low to place the part in shutdown. Absolute max 6.0V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Seaward Elec |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `SE9450-HFSE9450P-42-HF`+- `SE9450-HFSE9450P-435-HF`+- `SE9450-HFSE9450BP-42-HF`+- `SE9450-HFSE9450BP-435-HF`+- `SE9450-HFSE9450D-42-HF`+- `SE9450-HFSE9450D-435-HF`+- `SE9450-HFSE9450BD-42-HF`+- `SE9450-HFSE9450BD-435-HF`++## CAD (KiCad official)++- Symbol: `SE9450-HF`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Seaward Elec datasheet](docs/se9450-hf-datasheet.pdf) (14 pp, sha256 `8a53ce8ea33ee242`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/se9450-hf-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "se9450-hf",+ "version": "0.1.0",+ "type": "component",+ "description": "Seaward Elec Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "se9450-hf"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "se9450-hf.kicad_sym",+ "se9450-hf.kicad_mod",+ "se9450-hf.glb",+ "se9450-hf.step",+ "se9450-hf.lbr",+ "docs/hero.png",+ "docs/se9450-hf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}