← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# SE9027-HF++**Seaward Elec** · Battery Management · SOT-23-6++SE9027-HF from Seaward Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CHRG | output | Open-drain charge-status output. Pulled low by an internal N-channel MOSFET (ICHRG ≈ 5mA, VOL ≤ 0.4V) while the battery is being charged; high-impedance once the charge cycle completes. Typically drives a status LED to VCC through a series resistor. |+| 2 | GND | power_in | Device ground reference. Also the primary thermal path for the SOT-23-6 package; connect to a large copper pour to maximize allowable charge current. |+| 3 | BAT | power_out | Charge-current output to the single-cell Li-Ion/Li-Polymer battery. Regulates the final float voltage to 4.2V (SE9027-42) or 4.35V (SE9027-435) with ±1% accuracy; absolute maximum 11V, up to 800mA pin current. |+| 4 | VCC | power_in | Positive input supply. Operating range 4.5V-25V, absolute maximum 28V, with internal 6.5V OVP that blocks charging until VCC drops back below the threshold. Bypass to GND with at least 1µF (consider a small series resistor with low-ESR ceramics to damp start-up transients). |+| 5 | STDBY | output | Open-drain charge-termination status output. High-impedance while charging (pulled high by an external pull-up); pulled low by an internal N-channel MOSFET after the charge cycle completes. Typically drives a 'done' LED. |+| 6 | PROG | bidirectional | Charge-current program / monitor / shutdown pin. Connect a resistor RPROG from PROG to GND to set charge current (ICHG = 1000V / RPROG; e.g. 2kΩ → 500mA, 10kΩ → 100mA). VPROG ≈ 1.0V in current mode and can be sensed to monitor charge current. Pulling PROG above ~1.24V (or floating it) puts the charger into shutdown. Absolute maximum 7V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Seaward Elec |+| Package | SOT-23-6 |+| Category | PMIC |+| Pins | 6 |++## Ordering variants++- `SE9027-HFSE9027-42-HF`+- `SE9027-HFSE9027-435-HF`++## CAD (KiCad official)++- Symbol: `SE9027-HF`+- Footprint: `Package_TO_SOT_SMD:SOT-23-6`+- 3D model: SOT-23-6 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Seaward Elec datasheet](docs/se9027-hf-datasheet.pdf) (10 pp, sha256 `209469ab3d3d70ed`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/se9027-hf-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "se9027-hf",+ "version": "0.1.0",+ "type": "component",+ "description": "Seaward Elec Battery Management, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "se9027-hf"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "se9027-hf.kicad_sym",+ "se9027-hf.kicad_mod",+ "se9027-hf.glb",+ "se9027-hf.step",+ "se9027-hf.lbr",+ "docs/hero.png",+ "docs/se9027-hf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}