← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "CHRG", "type": "output",- "description": "Open-drain charge-status output. Pulled low by an internal N-channel MOSFET (ICHRG \u2248 5mA, VOL \u2264 0.4V) while the battery is being charged; high-impedance once the charge cycle completes. Typically drives a status LED to VCC through a series resistor."+ "description": "Open-drain charge-status output. Pulled low by an internal N-channel MOSFET (ICHRG ≈ 5mA, VOL ≤ 0.4V) while the battery is being charged; high-impedance once the charge cycle completes. Typically drives a status LED to VCC through a series resistor." }, { "number": "2",@@ -44,13 +44,13 @@ "number": "3", "name": "BAT", "type": "power_out",- "description": "Charge-current output to the single-cell Li-Ion/Li-Polymer battery. Regulates the final float voltage to 4.2V (SE9027-42) or 4.35V (SE9027-435) with \u00b11% accuracy; absolute maximum 11V, up to 800mA pin current."+ "description": "Charge-current output to the single-cell Li-Ion/Li-Polymer battery. Regulates the final float voltage to 4.2V (SE9027-42) or 4.35V (SE9027-435) with ±1% accuracy; absolute maximum 11V, up to 800mA pin current." }, { "number": "4", "name": "VCC", "type": "power_in",- "description": "Positive input supply. Operating range 4.5V-25V, absolute maximum 28V, with internal 6.5V OVP that blocks charging until VCC drops back below the threshold. Bypass to GND with at least 1\u00b5F (consider a small series resistor with low-ESR ceramics to damp start-up transients)."+ "description": "Positive input supply. Operating range 4.5V-25V, absolute maximum 28V, with internal 6.5V OVP that blocks charging until VCC drops back below the threshold. Bypass to GND with at least 1µF (consider a small series resistor with low-ESR ceramics to damp start-up transients)." }, { "number": "5",@@ -62,7 +62,7 @@ "number": "6", "name": "PROG", "type": "bidirectional",- "description": "Charge-current program / monitor / shutdown pin. Connect a resistor RPROG from PROG to GND to set charge current (ICHG = 1000V / RPROG; e.g. 2k\u03a9 \u2192 500mA, 10k\u03a9 \u2192 100mA). VPROG \u2248 1.0V in current mode and can be sensed to monitor charge current. Pulling PROG above ~1.24V (or floating it) puts the charger into shutdown. Absolute maximum 7V."+ "description": "Charge-current program / monitor / shutdown pin. Connect a resistor RPROG from PROG to GND to set charge current (ICHG = 1000V / RPROG; e.g. 2kΩ → 500mA, 10kΩ → 100mA). VPROG ≈ 1.0V in current mode and can be sensed to monitor charge current. Pulling PROG above ~1.24V (or floating it) puts the charger into shutdown. Absolute maximum 7V." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/se9027-hf-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }