← Commit history
README.mdadded+41@@ -0,0 +1,41 @@+# SE9017-HF++**Seaward Elec** · Battery Management · SOT-23-6++SE9017-HF from Seaward Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CHRG | output | Open-drain charge status output. Pulled low by an internal N-channel MOSFET (~10mA sink capability) while a charge cycle is active; goes Hi-Z when charging completes. Typically drives an LED to ground through a series resistor. |+| 2 | GND | power_in | Device ground reference and primary thermal path. Should tie to a wide copper plane to spread heat generated by the internal pass MOSFET. |+| 3 | BAT | power_out | Charge current output to the single-cell Li-Ion/Li-Polymer battery. Regulates the final float voltage to 4.21V ±1% and can deliver up to 800mA. Absolute maximum 5.5V; withstands continuous short-circuit to GND. |+| 4 | VCC | power_in | Positive input supply from wall adapter or USB port. Operating range 3.5V to 6V (recommended 4.5-6V), 7V absolute max. Bypass with at least a 1µF capacitor to GND (add ~1.5Ω series resistor if using low-ESR ceramic to damp start-up transients). |+| 5 | CHRGT | output | Open-drain charge-termination status output. High-impedance while charging (pulled high externally, e.g. through an LED to VCC); pulled low by an internal N-channel MOSFET after the charge cycle terminates, providing an end-of-charge indicator. |+| 6 | PROG | bidirectional | Charge-current program, charge-current monitor and shutdown pin. Connect a resistor RPROG to GND; charge current IBAT = 1060 · VPROG / RPROG (VPROG ≈ 1.0V typ), so RPROG = 2kΩ → ~530mA, 10kΩ → ~106mA. Floating the pin (or pulling above ~1.25V) forces the chip into shutdown; the pin voltage can also be sensed to monitor instantaneous charge current. Absolute max VCC+0.3V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Seaward Elec |+| Package | SOT-23-6 |+| Category | PMIC |+| Pins | 6 |++## CAD (KiCad official)++- Symbol: `SE9017-HF`+- Footprint: `Package_TO_SOT_SMD:SOT-23-6`+- 3D model: SOT-23-6 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Seaward Elec datasheet](docs/se9017-hf-datasheet.pdf) (10 pp, sha256 `473055e34d4959ae`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/se9017-hf-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "se9017-hf",+ "version": "0.1.0",+ "type": "component",+ "description": "Seaward Elec Battery Management, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "se9017-hf"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "se9017-hf.kicad_sym",+ "se9017-hf.kicad_mod",+ "se9017-hf.glb",+ "se9017-hf.step",+ "se9017-hf.lbr",+ "docs/hero.png",+ "docs/se9017-hf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}