← Commit history

Set visibility: public

Ray ·814b1ff45b · ·parent 7d26b44
1 file changed +7−4
page.json+7−4
@@ -44,13 +44,13 @@         "number": "3",         "name": "BAT",         "type": "power_out",-        "description": "Charge current output to the Li-ion/Li-polymer battery. Regulated to a 4.22V float voltage (\u00b11%) with programmable current up to 200mA (IBAT max 300mA absolute). May be short-circuited to GND continuously; battery drain in shutdown is <1\u00b5A."+        "description": "Charge current output to the Li-ion/Li-polymer battery. Regulated to a 4.22V float voltage (±1%) with programmable current up to 200mA (IBAT max 300mA absolute). May be short-circuited to GND continuously; battery drain in shutdown is <1µA."       },       {         "number": "4",         "name": "VCC",         "type": "power_in",-        "description": "Positive input supply. Operating range 3.7-5.5V (absolute max 7V); UVLO threshold ~3.5V with 100mV hysteresis. Bypass with at least a 1\u00b5F capacitor close to the pin; add ~1.5\u03a9 series with ceramic input caps to suppress hot-plug transients."+        "description": "Positive input supply. Operating range 3.7-5.5V (absolute max 7V); UVLO threshold ~3.5V with 100mV hysteresis. Bypass with at least a 1µF capacitor close to the pin; add ~1.5Ω series with ceramic input caps to suppress hot-plug transients."       },       {         "number": "5",@@ -62,7 +62,7 @@         "number": "6",         "name": "PROG",         "type": "bidirectional",-        "description": "Charge-current program, monitor and shutdown pin. A resistor from PROG to GND sets IBAT = 200V / RPROG (e.g., 1k\u03a9 \u2192 200mA, 10k\u03a9 \u2192 20mA); VPROG \u2248 1.03V in current mode. Serves as an analog charge-current monitor (IBAT = VPROG/RPROG \u00d7 200) and as manual shutdown when pulled above ~1.25V. Keep the pole at this node above 100kHz for stability."+        "description": "Charge-current program, monitor and shutdown pin. A resistor from PROG to GND sets IBAT = 200V / RPROG (e.g., 1kΩ → 200mA, 10kΩ → 20mA); VPROG ≈ 1.03V in current mode. Serves as an analog charge-current monitor (IBAT = VPROG/RPROG × 200) and as manual shutdown when pulled above ~1.25V. Keep the pole at this node above 100kHz for stability."       }     ],     "provenance": {@@ -132,5 +132,8 @@     "docs/se9012-hf-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file