← Commit history
se8117t50hf: input/output capacitor conditions from the datasheet
2 files changed
+74−27
package.json+36−12@@ -57,40 +57,64 @@ "source_page": 1, "source": "datasheet" },+ {+ "kind": "recommended_operating",+ "name": "Output capacitor ESR",+ "symbol": "ESR",+ "min": 0.15,+ "typ": null,+ "max": 0.5,+ "unit": "ohm",+ "conditions": "p.1 pin table: 0.15 ohm <= ESR <= 0.5 ohm on both the input and output capacitor",+ "source_page": 1,+ "source": "datasheet"+ }, { "kind": "recommended_operating", "name": "Input capacitance", "symbol": "CIN",- "min": 10,+ "min": 4.7, "typ": null, "max": null, "unit": "uF",- "conditions": "p.1 pin table: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected from this pin to ground to insure stability\"; characterised at CIN=10uF (p.3); p.5: \"An input capacitor of 10uF is recommended. Ceramic or Tantalum can be used.\" Note p.1 also says \"Stable operation without Cin and Cout\"",+ "conditions": "stated minimum: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected from this pin to ground to insure stability\" (p.1 pin table); p.1 also says \"Stable operation without Cin and Cout\"", "source_page": 1, "source": "datasheet" },+ {+ "kind": "recommended_operating",+ "name": "Input capacitance (recommended)",+ "symbol": "CIN",+ "min": null,+ "typ": 10,+ "max": null,+ "unit": "uF",+ "conditions": "recommended: \"An input capacitor of 10uF is recommended. Ceramic or Tantalum can be used.\" (p.5); electrical characteristics measured at CIN=10uF (p.3)",+ "source_page": 5,+ "source": "datasheet"+ }, { "kind": "recommended_operating", "name": "Output capacitance", "symbol": "COUT",- "min": 22,+ "min": 4.7, "typ": null, "max": null, "unit": "uF",- "conditions": "p.1 pin table: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected\"; characterised at COUT=22uF (p.3, ripple rejection at 22uF Tantalum); p.5: \"An output capacitor of 22uF is recommended\"",+ "conditions": "stated minimum: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected\" (p.1 pin table)", "source_page": 1, "source": "datasheet" }, { "kind": "recommended_operating",- "name": "Output capacitor ESR",- "symbol": "ESR",- "min": 0.15,- "typ": null,- "max": 0.5,- "unit": "ohm",- "conditions": "p.1 pin table: 0.15 ohm <= ESR <= 0.5 ohm on both the input and output capacitor",- "source_page": 1,+ "name": "Output capacitance (recommended)",+ "symbol": "COUT",+ "min": null,+ "typ": 22,+ "max": null,+ "unit": "uF",+ "conditions": "recommended: \"An output capacitor of 22uF is recommended\" (p.5); electrical characteristics measured at COUT=22uF (p.3, ripple rejection at 22uF tantalum)",+ "source_page": 5, "source": "datasheet" } ]
page.json+38−15@@ -139,40 +139,64 @@ "source_page": 1, "source": "datasheet" },+ {+ "kind": "recommended_operating",+ "name": "Output capacitor ESR",+ "symbol": "ESR",+ "min": 0.15,+ "typ": null,+ "max": 0.5,+ "unit": "ohm",+ "conditions": "p.1 pin table: 0.15 ohm <= ESR <= 0.5 ohm on both the input and output capacitor",+ "source_page": 1,+ "source": "datasheet"+ }, { "kind": "recommended_operating", "name": "Input capacitance", "symbol": "CIN",- "min": 10,+ "min": 4.7, "typ": null, "max": null, "unit": "uF",- "conditions": "p.1 pin table: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected from this pin to ground to insure stability\"; characterised at CIN=10uF (p.3); p.5: \"An input capacitor of 10uF is recommended. Ceramic or Tantalum can be used.\" Note p.1 also says \"Stable operation without Cin and Cout\"",+ "conditions": "stated minimum: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected from this pin to ground to insure stability\" (p.1 pin table); p.1 also says \"Stable operation without Cin and Cout\"", "source_page": 1, "source": "datasheet" },+ {+ "kind": "recommended_operating",+ "name": "Input capacitance (recommended)",+ "symbol": "CIN",+ "min": null,+ "typ": 10,+ "max": null,+ "unit": "uF",+ "conditions": "recommended: \"An input capacitor of 10uF is recommended. Ceramic or Tantalum can be used.\" (p.5); electrical characteristics measured at CIN=10uF (p.3)",+ "source_page": 5,+ "source": "datasheet"+ }, { "kind": "recommended_operating", "name": "Output capacitance", "symbol": "COUT",- "min": 22,+ "min": 4.7, "typ": null, "max": null, "unit": "uF",- "conditions": "p.1 pin table: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected\"; characterised at COUT=22uF (p.3, ripple rejection at 22uF Tantalum); p.5: \"An output capacitor of 22uF is recommended\"",+ "conditions": "stated minimum: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected\" (p.1 pin table)", "source_page": 1, "source": "datasheet" }, { "kind": "recommended_operating",- "name": "Output capacitor ESR",- "symbol": "ESR",- "min": 0.15,- "typ": null,- "max": 0.5,- "unit": "ohm",- "conditions": "p.1 pin table: 0.15 ohm <= ESR <= 0.5 ohm on both the input and output capacitor",- "source_page": 1,+ "name": "Output capacitance (recommended)",+ "symbol": "COUT",+ "min": null,+ "typ": 22,+ "max": null,+ "unit": "uF",+ "conditions": "recommended: \"An output capacitor of 22uF is recommended\" (p.5); electrical characteristics measured at COUT=22uF (p.3, ripple rejection at 22uF tantalum)",+ "source_page": 5, "source": "datasheet" } ]@@ -204,8 +228,7 @@ ], "discovery_pitch": "SE8117T50HF (Seaward Elec) component page with datasheet-verified CAD.", "author": {- "name": "Ray",- "email": "[email protected]"+ "name": "Ray" }, "dependencies": {}, "hero": {@@ -233,4 +256,4 @@ "updated_at": "2026-09-25T05:42:03.664Z", "description": "Seaward Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "org": "adom"-}+}