← Commit history

Publish 0.1.5

Ray ·eebfbcbda9 · ·parent fdf826c
4 files changed +276−10
package.json+106−3
@@ -1,6 +1,6 @@ {   "slug": "se8117t33hf",-  "version": "0.1.4",+  "version": "0.1.5",   "type": "component",   "description": "Seaward Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-3. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -26,7 +26,9 @@     "viewers/symbol.html",     "viewers/footprint.html",     "se8117t33hf-etched.step",-    "se8117t33hf-etched.glb"+    "se8117t33hf-etched.glb",+    "se8117t33hf-hero.glb",+    "se8117t33hf-hero.overlay.json"   ],   "metadata": {     "characteristics": {@@ -119,5 +121,106 @@         }       ]     }-  }+  },+  "component": {+    "mpn": "SE8117T33HF",+    "manufacturer": "Seaward Elec",+    "package": "SOT-223-3",+    "pin_count": 3,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "se8117t33hf.kicad_sym",+      "footprint": "se8117t33hf.kicad_mod",+      "model_3d": "se8117t33hf-hero.glb",+      "model_3d_plain": "se8117t33hf.glb",+      "model_3d_step": "se8117t33hf-etched.step",+      "model_3d_step_plain": "se8117t33hf.step",+      "lbr": "se8117t33hf.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the fixed-output regulator. On the adjustable SE8117TA variant this pin becomes ADJ (a resistor divider from OUT to this pin and to ground sets VOUT); for the fixed 3.3V SE8117T33 this pin is tied to ground."+      },+      {+        "number": "2",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated 3.3V output of the LDO (guaranteed 1A). A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω), typically 22µF, must be connected from this pin to ground to ensure stability and improve transient/PSRR performance. Also connected to the exposed tab (Tab is Vout)."+      },+      {+        "number": "3",+        "name": "IN",+        "type": "power_in",+        "description": "Input supply pin (absolute max 18V). Must be at least 1.3V higher than VOUT for proper regulation. A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω), typically 10µF ceramic or tantalum, must be connected from this pin to ground to ensure stability."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "distributor_links": {+      "lcsc": "C2847492",+      "digikey": false,+      "mouser": false+    },+    "distributor_check": {+      "checked_at": "2026-10-05T19:16:20Z",+      "source": "Component Ocean /api/assign-pns + lcsc_map",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "models_3d": [+      {+        "file": "se8117t33hf.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7,+          6.5,+          1.7+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "se8117t33hf-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7,+          6.5,+          1.7+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "662df7612054d2120f07c095919c5fd63f3c627bd0d6df069bb2b15edb21e221",+        "checked": "2026-10-16",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public" }
page.json+7−7
@@ -1,6 +1,6 @@ {   "slug": "se8117t33hf",-  "version": "0.1.4",+  "version": "0.1.5",   "type": "component",   "description": "Seaward Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-3. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -26,11 +26,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "se8117t33hf-etched.step",-    "se8117t33hf-etched.glb"+    "se8117t33hf-etched.glb",+    "se8117t33hf-hero.glb",+    "se8117t33hf-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "author": {     "name": "Ray"   },@@ -43,7 +43,7 @@     "parts": {       "symbol": "se8117t33hf.kicad_sym",       "footprint": "se8117t33hf.kicad_mod",-      "model_3d": "se8117t33hf-etched.glb",+      "model_3d": "se8117t33hf-hero.glb",       "model_3d_plain": "se8117t33hf.glb",       "model_3d_step": "se8117t33hf-etched.step",       "model_3d_step_plain": "se8117t33hf.step",@@ -227,4 +227,4 @@       ]     }   }-}+}\ No newline at end of file
se8117t33hf-hero.glbadded
⋯ 1 unchanged line ⋯
se8117t33hf-hero.overlay.jsonadded+163
@@ -0,0 +1,163 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "SE8117T33HF",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 4,+      "span_mm": 8.4,+      "dash_mm": 0.21,+      "gap_mm": 0.126,+      "pad_stroke_mm": 0.0504+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 5,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 3,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.664,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.5,+      3.5,+      -2.684,+      2.684+    ],+    "pads_bbox_mm": [+      -4.15,+      4.15,+      -3.05,+      3.05+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "se8117t33hf-etched.glb",+    "glb_sha256": "195ba7c3a26f363a79ec671f8a90793007f6457b90961a447fc8b659993074d6",+    "footprint": "se8117t33hf.kicad_mod",+    "footprint_sha256": "5f6cad94d6c821d01d360a4a09cca4b89e63ae0ce12c33d1dd0ba4e30e86c523",+    "pins": "page.json component.pins",+    "pins_sha256": "5477fdf4494e70ba911d135b50ce53329134b14caf2e3566f368507feadb9ab5"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "GND",+      "x": -4.3,+      "y": -2.3,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "OUT",+      "x": -4.3,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "IN",+      "x": -4.3,+      "y": 2.3,+      "align": "right",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -3.15,+        -2.3+      ],+      "size_mm": [+        2.0,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -3.15,+        0.0+      ],+      "size_mm": [+        2.0,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        3.15,+        0.0+      ],+      "size_mm": [+        2.0,+        3.8+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -3.15,+        2.3+      ],+      "size_mm": [+        2.0,+        1.5+      ],+      "rot": 0.0+    }+  ]+}