← Commit history

se555dr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·caafc49672 · ·parent 0b2380e
1 file changed +75−1
page.json+75−1
@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "SE555DR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Timers / Clock Oscillators",+    "datasheet": "https://www.ti.com/lit/ds/symlink/se555.pdf",+    "parts": {+      "symbol": "se555dr.kicad_sym",+      "footprint": "se555dr.kicad_mod",+      "model_3d": "se555dr-etched.glb",+      "model_3d_plain": "se555dr.glb",+      "model_3d_step": "se555dr-etched.step",+      "model_3d_step_plain": "se555dr.step",+      "lbr": "se555dr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V). Return for all supply and signal currents."+      },+      {+        "number": "2",+        "name": "TRIG",+        "type": "input",+        "description": "Trigger input. A negative-going pulse below VCC/3 (1/3 VCC) sets the internal flip-flop and drives the output HIGH. Typical trigger threshold ~1.67 V at VCC=5 V, ~5 V at VCC=15 V."+      },+      {+        "number": "3",+        "name": "OUT",+        "type": "output",+        "description": "Push-pull output. Can source or sink up to 200 mA. Output HIGH is approximately VCC - 1.7 V (typ) at 100 mA sink; output LOW is ~0.1 V at 5 mA sink."+      },+      {+        "number": "4",+        "name": "RESET",+        "type": "input",+        "description": "Active-low reset input. Forces the output LOW and discharge transistor ON regardless of other inputs when pulled below ~0.7 V. Tie to VCC if unused. Reset current typ 0.1 mA."+      },+      {+        "number": "5",+        "name": "CONT",+        "type": "input",+        "description": "Control voltage input. Directly accesses the 2/3 VCC reference of the upper comparator, allowing external modulation of timing thresholds. Bypass to GND with 0.01 µF when unused. Nominal voltage 2/3 VCC (~3.33 V at 5 V, ~10 V at 15 V)."+      },+      {+        "number": "6",+        "name": "THRES",+        "type": "input",+        "description": "Threshold input. When the voltage on THRES rises above 2/3 VCC, the internal flip-flop resets, driving the output LOW and turning on the discharge transistor. Typical threshold ~3.33 V at VCC=5 V, ~10 V at VCC=15 V."+      },+      {+        "number": "7",+        "name": "DISCH",+        "type": "output",+        "description": "Discharge output (open-collector NPN to GND). Provides a discharge path for the external timing capacitor when the output is LOW. Sinks the timing-capacitor current to GND; not driven high internally."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage. Operating range 4.5 V to 18 V (SE555). Supply current typ 3 mA at VCC=5 V, 10 mA at VCC=15 V (output LOW)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}