← Commit history
package.json+146−4@@ -1,6 +1,6 @@ { "slug": "se555dr",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Timers / Clock Oscillators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,148 @@ "docs/hero.png", "docs/se555dr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "se555dr-etched.step",+ "se555dr-etched.glb"+ ],+ "component": {+ "mpn": "SE555DR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Timers / Clock Oscillators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/se555.pdf",+ "parts": {+ "symbol": "se555dr.kicad_sym",+ "footprint": "se555dr.kicad_mod",+ "model_3d": "se555dr-etched.glb",+ "model_3d_plain": "se555dr.glb",+ "model_3d_step": "se555dr-etched.step",+ "model_3d_step_plain": "se555dr.step",+ "lbr": "se555dr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0 V). Return for all supply and signal currents."+ },+ {+ "number": "2",+ "name": "TRIG",+ "type": "input",+ "description": "Trigger input. A negative-going pulse below VCC/3 (1/3 VCC) sets the internal flip-flop and drives the output HIGH. Typical trigger threshold ~1.67 V at VCC=5 V, ~5 V at VCC=15 V."+ },+ {+ "number": "3",+ "name": "OUT",+ "type": "output",+ "description": "Push-pull output. Can source or sink up to 200 mA. Output HIGH is approximately VCC - 1.7 V (typ) at 100 mA sink; output LOW is ~0.1 V at 5 mA sink."+ },+ {+ "number": "4",+ "name": "RESET",+ "type": "input",+ "description": "Active-low reset input. Forces the output LOW and discharge transistor ON regardless of other inputs when pulled below ~0.7 V. Tie to VCC if unused. Reset current typ 0.1 mA."+ },+ {+ "number": "5",+ "name": "CONT",+ "type": "input",+ "description": "Control voltage input. Directly accesses the 2/3 VCC reference of the upper comparator, allowing external modulation of timing thresholds. Bypass to GND with 0.01 µF when unused. Nominal voltage 2/3 VCC (~3.33 V at 5 V, ~10 V at 15 V)."+ },+ {+ "number": "6",+ "name": "THRES",+ "type": "input",+ "description": "Threshold input. When the voltage on THRES rises above 2/3 VCC, the internal flip-flop resets, driving the output LOW and turning on the discharge transistor. Typical threshold ~3.33 V at VCC=5 V, ~10 V at VCC=15 V."+ },+ {+ "number": "7",+ "name": "DISCH",+ "type": "output",+ "description": "Discharge output (open-collector NPN to GND). Provides a discharge path for the external timing capacitor when the output is LOW. Sinks the timing-capacitor current to GND; not driven high internally."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage. Operating range 4.5 V to 18 V (SE555). Supply current typ 3 mA at VCC=5 V, 10 mA at VCC=15 V (output LOW)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C967980",+ "digikey": "296-39169-2-ND",+ "mouser": "595-SE555DR"+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:16:15Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": "296-39169-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-SE555DR",+ "status": "found"+ }+ },+ "models_3d": [+ {+ "file": "se555dr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "se555dr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "16b8cb9b12fb65efad4900b7d09fcf36bdc9fb93cd69e4d7295d56297edd239c",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "se555dr",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Timers / Clock Oscillators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/se555dr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "se555dr-etched.step"+ "se555dr-etched.step",+ "se555dr-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -171,5 +170,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}