← Commit history
package.json+144−4@@ -1,6 +1,6 @@ { "slug": "se3837b",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Seaward Elec DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,146 @@ "docs/hero.png", "docs/se3837b-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "se3837b-etched.step",+ "se3837b-etched.glb"+ ],+ "component": {+ "mpn": "SE3837B",+ "manufacturer": "Seaward Elec",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "se3837b.kicad_sym",+ "footprint": "se3837b.kicad_mod",+ "model_3d": "se3837b-etched.glb",+ "model_3d_plain": "se3837b.glb",+ "model_3d_step": "se3837b-etched.step",+ "model_3d_step_plain": "se3837b.step",+ "lbr": "se3837b.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "Output current sense pin. Constant current is set by an external sense resistor Rcs from Vout- to GND: Iout = Vse/Rcs, where Vse depends on the grade (A: 105 mV, B: 120 mV, C: 140 mV, ±6%). Absolute maximum voltage 6.5 V."+ },+ {+ "number": "2",+ "name": "FB",+ "type": "input",+ "description": "Voltage feedback pin. Sense output voltage via an external resistor divider; internal reference is 1.25 V, so Vout = 1.25 * (1 + R2/R1). Absolute maximum voltage 6.5 V; SCP triggers when Vfb < 0.3 V."+ },+ {+ "number": "3",+ "name": "VDD",+ "type": "power_out",+ "description": "Internal LDO / bypass capacitor pin for the on-chip voltage regulator. Requires a 10 uF ceramic bypass capacitor to GND. Absolute maximum 6.5 V; not intended to drive external loads."+ },+ {+ "number": "4",+ "name": "VIN",+ "type": "power_in",+ "description": "Main power supply input, DC 4.5-40 V wide range. Requires an electrolytic bulk capacitor plus a ceramic decoupling capacitor to GND to suppress switching noise. UVLO threshold typ 4 V; absolute maximum 40 V."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "power_out",+ "description": "Power switch output node. Connects to the source of the internal high-side MOSFET and drain of the low-side MOSFET; drive an external inductor to VOUT. Rds(on) high-side ~46 mΩ, low-side ~22 mΩ; typical peak current limit 3.5 A. Absolute maximum 40 V."+ },+ {+ "number": "6",+ "name": "SW",+ "type": "power_out",+ "description": "Power switch output node (tied to pin 5). Connects to the source of the internal high-side MOSFET and drain of the low-side MOSFET; drive an external inductor to VOUT. Absolute maximum 40 V."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return pin (tied to pin 8). Both GND pins must connect to the board ground plane; they also serve as the primary thermal path from the die."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return pin (tied to pin 7). Both GND pins must connect to the board ground plane; they also serve as the primary thermal path from the die."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:16:11Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "se3837b.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "se3837b-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a7b640b808190622d91aa85e345f1d4ed1a6cc7926b547fbc7e77222856e6b3e",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "se3837b",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Seaward Elec DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/se3837b-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "se3837b-etched.step"+ "se3837b-etched.step",+ "se3837b-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -169,5 +168,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}