← Commit history
se3837b: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "SE3837B",+ "manufacturer": "Seaward Elec",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "se3837b.kicad_sym",+ "footprint": "se3837b.kicad_mod",+ "model_3d": "se3837b-etched.glb",+ "model_3d_plain": "se3837b.glb",+ "model_3d_step": "se3837b-etched.step",+ "model_3d_step_plain": "se3837b.step",+ "lbr": "se3837b.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "Output current sense pin. Constant current is set by an external sense resistor Rcs from Vout- to GND: Iout = Vse/Rcs, where Vse depends on the grade (A: 105 mV, B: 120 mV, C: 140 mV, ±6%). Absolute maximum voltage 6.5 V."+ },+ {+ "number": "2",+ "name": "FB",+ "type": "input",+ "description": "Voltage feedback pin. Sense output voltage via an external resistor divider; internal reference is 1.25 V, so Vout = 1.25 * (1 + R2/R1). Absolute maximum voltage 6.5 V; SCP triggers when Vfb < 0.3 V."+ },+ {+ "number": "3",+ "name": "VDD",+ "type": "power_out",+ "description": "Internal LDO / bypass capacitor pin for the on-chip voltage regulator. Requires a 10 uF ceramic bypass capacitor to GND. Absolute maximum 6.5 V; not intended to drive external loads."+ },+ {+ "number": "4",+ "name": "VIN",+ "type": "power_in",+ "description": "Main power supply input, DC 4.5-40 V wide range. Requires an electrolytic bulk capacitor plus a ceramic decoupling capacitor to GND to suppress switching noise. UVLO threshold typ 4 V; absolute maximum 40 V."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "power_out",+ "description": "Power switch output node. Connects to the source of the internal high-side MOSFET and drain of the low-side MOSFET; drive an external inductor to VOUT. Rds(on) high-side ~46 mΩ, low-side ~22 mΩ; typical peak current limit 3.5 A. Absolute maximum 40 V."+ },+ {+ "number": "6",+ "name": "SW",+ "type": "power_out",+ "description": "Power switch output node (tied to pin 5). Connects to the source of the internal high-side MOSFET and drain of the low-side MOSFET; drive an external inductor to VOUT. Absolute maximum 40 V."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return pin (tied to pin 8). Both GND pins must connect to the board ground plane; they also serve as the primary thermal path from the die."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return pin (tied to pin 7). Both GND pins must connect to the board ground plane; they also serve as the primary thermal path from the die."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}