component
SE100-HF
Public Made by Adomby adom
Seaward Elec Battery Management, SOP-8-150mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -38,25 +38,25 @@ "number": "2", "name": "V1", "type": "output",- "description": "Open-drain output (switch N1) of the output-voltage adjustment logic. Pulled low when 9 V, 12 V, or 20 V output is requested. RDS(on) typ 300 \u03a9; drives an external feedback resistor to adjust the adapter's output. Absolute max V1 <= VBP; I(V1) <= 0.5 mA."+ "description": "Open-drain output (switch N1) of the output-voltage adjustment logic. Pulled low when 9 V, 12 V, or 20 V output is requested. RDS(on) typ 300 Ω; drives an external feedback resistor to adjust the adapter's output. Absolute max V1 <= VBP; I(V1) <= 0.5 mA." }, { "number": "3", "name": "V2", "type": "output",- "description": "Open-drain output (switch N2) of the output-voltage adjustment logic. Pulled low when 12 V or 20 V output is requested. RDS(on) typ 300 \u03a9. Absolute max V2 <= VBP; I(V2) <= 0.5 mA."+ "description": "Open-drain output (switch N2) of the output-voltage adjustment logic. Pulled low when 12 V or 20 V output is requested. RDS(on) typ 300 Ω. Absolute max V2 <= VBP; I(V2) <= 0.5 mA." }, { "number": "4", "name": "V3", "type": "output",- "description": "Open-drain output (switch N3) of the output-voltage adjustment logic. Pulled low when 20 V output is requested. Tie V3 to BP (directly or through <=100 k\u03a9) to inhibit Class-B 20 V operation. RDS(on) typ 300 \u03a9."+ "description": "Open-drain output (switch N3) of the output-voltage adjustment logic. Pulled low when 20 V output is requested. Tie V3 to BP (directly or through <=100 kΩ) to inhibit Class-B 20 V operation. RDS(on) typ 300 Ω." }, { "number": "5", "name": "D-", "type": "bidirectional",- "description": "USB D- data line. Monitored during Quick Charge 2.0 handshake and driven low through an internal 19.53 k\u03a9 pull-down (switch N4) plus short-circuited to D+ via N5 during BC1.2 DCP handshake. Absolute max 5 V; I <= 1 mA."+ "description": "USB D- data line. Monitored during Quick Charge 2.0 handshake and driven low through an internal 19.53 kΩ pull-down (switch N4) plus short-circuited to D+ via N5 during BC1.2 DCP handshake. Absolute max 5 V; I <= 1 mA." }, { "number": "6",@@ -68,13 +68,13 @@ "number": "7", "name": "R", "type": "passive",- "description": "Reference-current programming pin connected to the internal bandgap (VR typ 1.27 V). Connect an external resistor RREF (recommended 127 k\u03a9) to GND to set the reference current for internal timing circuits."+ "description": "Reference-current programming pin connected to the internal bandgap (VR typ 1.27 V). Connect an external resistor RREF (recommended 127 kΩ) to GND to set the reference current for internal timing circuits." }, { "number": "8", "name": "BP", "type": "power_in",- "description": "Bypass / internal-supply pin. An internal shunt regulator clamps BP at ~6 V (typ 5.3 V shunt at 3 mA); power the device through an external series resistor (recommended RBP = 4.7 k\u03a9) from the adapter output and decouple with CBP = 220 nF to GND. Absolute max 5.6 V; IBP max 15 mA. Power-up reset at VBP < 3.9 V; correct operation requires VBP >= 4 V."+ "description": "Bypass / internal-supply pin. An internal shunt regulator clamps BP at ~6 V (typ 5.3 V shunt at 3 mA); power the device through an external series resistor (recommended RBP = 4.7 kΩ) from the adapter output and decouple with CBP = 220 nF to GND. Absolute max 5.6 V; IBP max 15 mA. Power-up reset at VBP < 3.9 V; correct operation requires VBP >= 4 V." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/se100-hf-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }