← Commit history

Set visibility: public

Ray ·f7e6966ccb · ·parent 550ca39
1 file changed +7−4
page.json+7−4
@@ -44,19 +44,19 @@         "number": "3",         "name": "BAT",         "type": "power_out",-        "description": "Battery connection. Sources charge current to the single-cell Li-Ion battery and regulates the final float voltage to 4.2V (\u00b11%) via an internal precision resistor divider. Disconnected in shutdown; battery drain current falls below 2\u00b5A when input power is removed."+        "description": "Battery connection. Sources charge current to the single-cell Li-Ion battery and regulates the final float voltage to 4.2V (±1%) via an internal precision resistor divider. Disconnected in shutdown; battery drain current falls below 2µA when input power is removed."       },       {         "number": "4",         "name": "VCC",         "type": "power_in",-        "description": "Charger supply input; operating range 4.25V to 6.5V (absolute max 7V). Bypass with at least 1\u00b5F to GND. When VCC \u2212 VBAT < ~30mV the part enters shutdown and IBAT drops below 2\u00b5A."+        "description": "Charger supply input; operating range 4.25V to 6.5V (absolute max 7V). Bypass with at least 1µF to GND. When VCC − VBAT < ~30mV the part enters shutdown and IBAT drops below 2µA."       },       {         "number": "5",         "name": "PROG",         "type": "bidirectional",-        "description": "Charge-current program, monitor, and shutdown pin. A 1% resistor RPROG from PROG to GND sets the constant-current level: IBAT = (VPROG/RPROG)\u00b71000 (VPROG = 1V in CC mode, 0.1V in precharge). Floating the pin lets an internal 3\u00b5A pull-up bring PROG above the 1.21V shutdown threshold, putting the charger in shutdown with ICC \u2248 25\u00b5A. Pin is internally clamped near 2.4V."+        "description": "Charge-current program, monitor, and shutdown pin. A 1% resistor RPROG from PROG to GND sets the constant-current level: IBAT = (VPROG/RPROG)·1000 (VPROG = 1V in CC mode, 0.1V in precharge). Floating the pin lets an internal 3µA pull-up bring PROG above the 1.21V shutdown threshold, putting the charger in shutdown with ICC ≈ 25µA. Pin is internally clamped near 2.4V."       }     ],     "provenance": {@@ -120,5 +120,8 @@     "docs/sd5054-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file