component
SCW8916B
Public Made by Adomby adom
SOC Shenzhen SinOne Microelectronics Float Level Senors, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "scw8916b",+ "title": "SCW8916B",+ "brief": "SOC Shenzhen SinOne Microelectronics Float Level Senors, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "SOC Shenzhen SinOne Microelectronics Float Level Senors, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "sensor", "scw8916b" ],+ "component": {+ "mpn": "SCW8916B",+ "manufacturer": "SOC Shenzhen SinOne Microelectronics",+ "package": "SOP-16",+ "pin_count": 16,+ "category": "Sensor",+ "subcategory": "Float Level Senors",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/8c6d94300a0d4ed687195f65b7e4df7b.pdf",+ "parts": {+ "symbol": "scw8916b.kicad_sym",+ "footprint": "scw8916b.kicad_mod",+ "model_3d": "scw8916b.glb",+ "model_3d_step": "scw8916b.step",+ "lbr": "scw8916b.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive power supply input. Operating range 3.0V to 5.5V."+ },+ {+ "number": "2",+ "name": "C",+ "type": "passive",+ "description": "Reference capacitor pin. Connect the external reference capacitor (typ. 104 / 100nF) used by the capacitive detection front-end."+ },+ {+ "number": "3",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for the device."+ },+ {+ "number": "4",+ "name": "OUT4",+ "type": "output",+ "description": "Channel 4 water-level level-signal output. Outputs 1 when water is detected on CH4, 0 otherwise (active in one-to-one level output mode)."+ },+ {+ "number": "5",+ "name": "OUT3/RXD",+ "type": "bidirectional",+ "description": "Dual-function pin. In level output mode: OUT3 outputs channel 3 water-level status (1 = water, 0 = no water). In UART output mode: acts as UART RXD input."+ },+ {+ "number": "6",+ "name": "OUT2/TXD",+ "type": "output",+ "description": "Dual-function pin. In level output mode: OUT2 outputs channel 2 water-level status (1 = water, 0 = no water). In UART output mode: acts as UART TXD output at 9600 baud, refreshed every 100 ms."+ },+ {+ "number": "7",+ "name": "OUT1",+ "type": "output",+ "description": "Channel 1 water-level level-signal output. Outputs 1 when water is detected on CH1, 0 otherwise. Also used to output calibration status pulses in BCD/test mode."+ },+ {+ "number": "8",+ "name": "TEST",+ "type": "bidirectional",+ "description": "Test/calibration pin (input first, then output). Used by the host to trigger water-present/water-absent calibration and self-check routines via defined low/high pulse patterns after power-up."+ },+ {+ "number": "9",+ "name": "SENS",+ "type": "input",+ "description": "Sensitivity selection input. Connect an external resistor to VDD to select one of 8 sensitivity levels (3.3K = highest, 10K, 18K, 27K default, 39K, 51K, 68K, 82K = lowest). Also requires a 100K resistor path to VDD; both resistors must be 1% tolerance."+ },+ {+ "number": "10",+ "name": "OUTS",+ "type": "input",+ "description": "Channel output communication-mode select. 1 (float / H) selects one-to-one level output on OUT1-OUT4; 0 (tied to GND) selects UART output on TXD with all channel states refreshed every 100 ms."+ },+ {+ "number": "11",+ "name": "TOPT",+ "type": "input",+ "description": "Test/calibration mode select. 0 = calibrate lower water level only; 1 = calibrate both upper and lower water levels."+ },+ {+ "number": "12",+ "name": "CH1",+ "type": "input",+ "description": "Water-detect sense channel 1 (lowest water-level channel). Connects to the corresponding copper foil on the water-level sense PCB."+ },+ {+ "number": "13",+ "name": "CH2",+ "type": "input",+ "description": "Water-detect sense channel 2. Connects to the corresponding sense-foil; tie to VSS (GND) if unused."+ },+ {+ "number": "14",+ "name": "CH3",+ "type": "input",+ "description": "Water-detect sense channel 3. Connects to the corresponding sense-foil; tie to VSS (GND) if unused."+ },+ {+ "number": "15",+ "name": "CH4",+ "type": "input",+ "description": "Water-detect sense channel 4 (highest water-level channel). Connects to the corresponding sense-foil; tie to VSS (GND) if unused."+ },+ {+ "number": "16",+ "name": "Reserve",+ "type": "unconnected",+ "description": "Reserved pin. Leave floating on the PCB (do not connect)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/8c6d94300a0d4ed687195f65b7e4df7b.pdf",+ "pages": 7,+ "sha256": "797e42d9aab4632e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "SOC Shenzhen SinOne Microelectronics",+ "Package": "SOP-16",+ "Category": "Sensor",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "scw8916b"+ ],+ "discovery_pitch": "SCW8916B (SOC Shenzhen SinOne Microelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/scw8916b-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }