← Commit history

Set visibility: public

Ray ·cf1068593a · ·parent ae66b53
1 file changed +8−5
page.json+8−5
@@ -44,19 +44,19 @@         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable input with internal ~1-4 \u00b5A pull-up current source. Pull below 1.05 V to disable, float or tie to VIN to enable. A resistor divider from VIN to GND on EN sets the programmable input UVLO threshold (VEN_H \u2248 1.21 V)."+        "description": "Enable input with internal ~1-4 µA pull-up current source. Pull below 1.05 V to disable, float or tie to VIN to enable. A resistor divider from VIN to GND on EN sets the programmable input UVLO threshold (VEN_H ≈ 1.21 V)."       },       {         "number": "4",         "name": "RT",         "type": "input",-        "description": "Oscillator frequency-set pin. Connect a resistor from RT to GND to program the switching frequency in the 300 kHz to 800 kHz range (e.g. R_RT = 500 k\u03a9 \u2192 ~500 kHz)."+        "description": "Oscillator frequency-set pin. Connect a resistor from RT to GND to program the switching frequency in the 300 kHz to 800 kHz range (e.g. R_RT = 500 kΩ → ~500 kHz)."       },       {         "number": "5",         "name": "FB",         "type": "input",-        "description": "Feedback input to the internal transconductance error amplifier. An external resistor divider from VOUT to GND sets the output voltage; FB is regulated to the internal 0.8 V (\u00b11%) reference."+        "description": "Feedback input to the internal transconductance error amplifier. An external resistor divider from VOUT to GND sets the output voltage; FB is regulated to the internal 0.8 V (±1%) reference."       },       {         "number": "6",@@ -68,7 +68,7 @@         "number": "7",         "name": "BST",         "type": "power_in",-        "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 \u00b5F capacitor from BST to SW; the cap is refreshed when the low-side MOSFET is on or SW is low. BOOT-SW rating 6 V max."+        "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 µF capacitor from BST to SW; the cap is refreshed when the low-side MOSFET is on or SW is low. BOOT-SW rating 6 V max."       },       {         "number": "8",@@ -144,5 +144,8 @@     "docs/sct2a10aster-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file