← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# SCT2A10ASTER++**SCT** · DC-DC Converters · ESOP-8++SCT2A10ASTER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Device ground. Connect to the ground plane; the exposed thermal pad (pin 9) must also be tied to this net for proper operation and thermal dissipation. |+| 2 | VIN | power_in | Input supply voltage, 4.5 V to 100 V. Connect a local bypass capacitor from VIN to GND with the shortest possible path to the high-frequency bypass capacitor and GND. |+| 3 | EN | input | Enable input with internal ~1-4 µA pull-up current source. Pull below 1.05 V to disable, float or tie to VIN to enable. A resistor divider from VIN to GND on EN sets the programmable input UVLO threshold (VEN_H ≈ 1.21 V). |+| 4 | RT | input | Oscillator frequency-set pin. Connect a resistor from RT to GND to program the switching frequency in the 300 kHz to 800 kHz range (e.g. R_RT = 500 kΩ → ~500 kHz). |+| 5 | FB | input | Feedback input to the internal transconductance error amplifier. An external resistor divider from VOUT to GND sets the output voltage; FB is regulated to the internal 0.8 V (±1%) reference. |+| 6 | NC | unconnected | No internal connection. Leave floating or tie to a static net per PCB convenience. |+| 7 | BST | power_in | Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 µF capacitor from BST to SW; the cap is refreshed when the low-side MOSFET is on or SW is low. BOOT-SW rating 6 V max. |+| 8 | SW | output | Switch node output of the internal power stage. Connect to the external power inductor. Rated -1 V to 105 V absolute maximum. |+| 9 | Thermal Pad | power_in | Exposed thermal pad on the underside of the ESOP-8 package. Electrically must be connected to GND (pin 1) and soldered to a PCB ground plane for proper operation and optimized thermal performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SCT |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `SCT2A10ASTER`++## CAD (KiCad official)++- Symbol: `SCT2A10ASTER`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SCT datasheet](docs/sct2a10aster-datasheet.pdf) (18 pp, sha256 `1657cc7e7137f11d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sct2a10aster-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "sct2a10aster",+ "version": "0.1.0",+ "type": "component",+ "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "sct2a10aster"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sct2a10aster.kicad_sym",+ "sct2a10aster.kicad_mod",+ "sct2a10aster.glb",+ "sct2a10aster.step",+ "sct2a10aster.lbr",+ "docs/hero.png",+ "docs/sct2a10aster-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}