← Commit history

Initial commit: component/sct2430ster

Ray ·9fb8401d84 ·
2 files changed +84
README.mdadded+50
@@ -0,0 +1,50 @@+# SCT2430STER++**SCT** · DC-DC Converters · ESOP-8++SCT2430STER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT | power_in | Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1uF ceramic capacitor from BOOT to SW; the bootstrap cap charges through an internal regulator when the low-side MOSFET is on or SW is low. BOOT-SW absolute max is 6V. |+| 2 | VIN | power_in | Input supply, 3.8V to 40V operating range (absolute max 42V). Connect a local high-frequency bypass capacitor from VIN to GND with the shortest possible path. |+| 3 | EN | input | Enable input with internal ~1.5uA pull-up current source and precision 1.18V rising / 1.1V falling threshold. Pull below 1.1V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND on EN programs the input UVLO threshold. High-voltage tolerant (abs max 42V). |+| 4 | RT/CLK | bidirectional | Dual-function timing pin. In resistor mode, a resistor from RT/CLK to GND programs the switching frequency (100kHz-2.2MHz; RT[kΩ] = 100000/fsw[kHz]). Alternatively, drive with an external clock (100kHz-2.2MHz, VIH ≥ 2V, VIL ≤ 0.4V, pulse width > 80ns) to synchronize via the internal PLL. Must not be left floating or shorted to ground. |+| 5 | FB | input | Feedback input to the inverting terminal of the internal trans-conductance error amplifier. Connect to the tap of an external resistor divider from VOUT to GND; the device regulates FB to the internal 0.8V ±1% reference (VOUT range 0.8V-40V). |+| 6 | COMP | output | Error amplifier output and loop compensation node. Connect the frequency-loop compensation network (typ. series R+C to GND) here. Also senses PSM entry (low clamp ~0.4V, high clamp ~3V). |+| 7 | GND | power_in | Device ground reference and power return. |+| 8 | SW | output | Switching node - source of the high-side MOSFET and drain of the low-side MOSFET. Connect to the external power inductor. Absolute max -0.3V to 42V. |+| 9 | Thermal Pad | power_in | Exposed die-attach pad on the package bottom. Electrically connected internally to GND (pin 7) and provides the primary heat-dissipation path. Must be soldered to the PCB ground plane for correct operation and thermal performance (RθJA = 42 °C/W). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SCT |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++Same part, different packaging or reel option.++- `SCT2430STER`++## CAD (KiCad official)++- Symbol: `SCT2430STER`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SCT datasheet](docs/sct2430ster-datasheet.pdf) (23 pp, sha256 `94ab70b839a113fe`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sct2430ster-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "sct2430ster",+  "version": "0.1.0",+  "type": "component",+  "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "sct2430ster"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sct2430ster.kicad_sym",+    "sct2430ster.kicad_mod",+    "sct2430ster.glb",+    "sct2430ster.step",+    "sct2430ster.lbr",+    "docs/hero.png",+    "docs/sct2430ster-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file