← Commit history
Publish 0.1.1
4 files changed
+440−11
package.json+157−4@@ -1,6 +1,6 @@ { "slug": "sct2430ster",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,159 @@ "docs/hero.png", "docs/sct2430ster-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "sct2430ster-etched.step",+ "sct2430ster-hero.glb",+ "sct2430ster-hero.overlay.json"+ ],+ "component": {+ "mpn": "SCT2430STER",+ "manufacturer": "SCT",+ "package": "ESOP-8",+ "pin_count": 9,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0484482a05e9ad4f428b0908fbd9c4e9.pdf",+ "parts": {+ "symbol": "sct2430ster.kicad_sym",+ "footprint": "sct2430ster.kicad_mod",+ "model_3d": "sct2430ster-hero.glb",+ "model_3d_plain": "sct2430ster.glb",+ "model_3d_step": "sct2430ster-etched.step",+ "model_3d_step_plain": "sct2430ster.step",+ "lbr": "sct2430ster.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "BOOT",+ "type": "power_in",+ "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1uF ceramic capacitor from BOOT to SW; the bootstrap cap charges through an internal regulator when the low-side MOSFET is on or SW is low. BOOT-SW absolute max is 6V."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply, 3.8V to 40V operating range (absolute max 42V). Connect a local high-frequency bypass capacitor from VIN to GND with the shortest possible path."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Enable input with internal ~1.5uA pull-up current source and precision 1.18V rising / 1.1V falling threshold. Pull below 1.1V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND on EN programs the input UVLO threshold. High-voltage tolerant (abs max 42V)."+ },+ {+ "number": "4",+ "name": "RT/CLK",+ "type": "bidirectional",+ "description": "Dual-function timing pin. In resistor mode, a resistor from RT/CLK to GND programs the switching frequency (100kHz-2.2MHz; RT[kΩ] = 100000/fsw[kHz]). Alternatively, drive with an external clock (100kHz-2.2MHz, VIH ≥ 2V, VIL ≤ 0.4V, pulse width > 80ns) to synchronize via the internal PLL. Must not be left floating or shorted to ground."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Feedback input to the inverting terminal of the internal trans-conductance error amplifier. Connect to the tap of an external resistor divider from VOUT to GND; the device regulates FB to the internal 0.8V ±1% reference (VOUT range 0.8V-40V)."+ },+ {+ "number": "6",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output and loop compensation node. Connect the frequency-loop compensation network (typ. series R+C to GND) here. Also senses PSM entry (low clamp ~0.4V, high clamp ~3V)."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference and power return."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "output",+ "description": "Switching node - source of the high-side MOSFET and drain of the low-side MOSFET. Connect to the external power inductor. Absolute max -0.3V to 42V."+ },+ {+ "number": "9",+ "name": "Thermal Pad",+ "type": "power_in",+ "description": "Exposed die-attach pad on the package bottom. Electrically connected internally to GND (pin 7) and provides the primary heat-dissipation path. Must be soldered to the PCB ground plane for correct operation and thermal performance (RθJA = 42 °C/W)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/0484482a05e9ad4f428b0908fbd9c4e9.pdf",+ "pages": 23,+ "sha256": "94ab70b839a113fe",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sct2430ster.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sct2430ster-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "dfea90adc449d66d484427129203473b0c8fec17482d14e4d51a492a90c27618",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "SCT2430STER",+ "brief": "SCT DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "SCT",+ "Package": "ESOP-8",+ "Category": "PMIC",+ "Pins": "9"+ }+ },+ "discovery_triggers": [+ "sct2430ster"+ ],+ "discovery_pitch": "SCT2430STER (SCT) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "sct2430ster", "title": "SCT2430STER", "brief": "SCT DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -190,10 +190,13 @@ "docs/hero.png", "docs/sct2430ster-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "sct2430ster-etched.step",+ "sct2430ster-hero.glb",+ "sct2430ster-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-25T05:34:05.964Z"-}+ "visibility": "public",+ "updated_at": "2026-09-25T05:34:05.964Z",+ "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}
sct2430ster-hero.glbadded⋯ 1 unchanged line ⋯
sct2430ster-hero.overlay.jsonadded+273@@ -0,0 +1,273 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "SCT2430STER",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 7.24,+ "dash_mm": 0.181,+ "gap_mm": 0.1086,+ "pad_stroke_mm": 0.0434+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.348,+ 2.348+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "sct2430ster-etched.glb",+ "glb_sha256": "a2c1e7bb086207aa2ac734d25c4a1cbbc43b8b538394da7d739ecac5998579b2",+ "footprint": "sct2430ster.kicad_mod",+ "footprint_sha256": "a7971720bdda0353306df93e5fd71765420f318659baa75f0dc1e7a40c1d2eca",+ "pins": "page.json component.pins",+ "pins_sha256": "279ef0761b7effd04255bf0623e2f76f18b28283112b1028c7cd1d381b3c1a83"+ },+ "generator": "adom-wiki 1.8.31 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "BOOT",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "VIN",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "EN",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "RT/CLK",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "FB",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "COMP",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "GND",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "SW",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 2.29,+ 3.0+ ],+ "rot": 0.0+ }+ ]+}