← Commit history

sct2220tvbr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·fcbb34472a · ·parent 2d11675
1 file changed +62−1
page.json+62−1
@@ -33,5 +33,66 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "SCT2220TVBR",+    "manufacturer": "SCT",+    "package": "TSOT-23-6L",+    "pin_count": 6,+    "category": "DC-DC Converters",+    "parts": {+      "symbol": "sct2220tvbr.kicad_sym",+      "footprint": "sct2220tvbr.kicad_mod",+      "model_3d": "sct2220tvbr-etched.glb",+      "model_3d_plain": "sct2220tvbr.glb",+      "model_3d_step": "sct2220tvbr-etched.step",+      "model_3d_step_plain": "sct2220tvbr.step",+      "lbr": "sct2220tvbr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Power ground return for the IC and the low-side power MOSFET. Must be soldered directly to the board ground plane for proper thermal and electrical performance."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "power_out",+        "description": "Power switching output - the junction of the high-side and low-side MOSFETs. Connect the external buck inductor from SW to the output, and a 0.1 µF (or greater) bootstrap capacitor from SW to BST."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Power supply input, 4.2 V to 17 V (18 V absolute max). Supplies both the IC and the high-side power switch; bypass to GND with a suitably large ceramic capacitor placed close to the pin."+      },+      {+        "number": "4",+        "name": "FB",+        "type": "input",+        "description": "Buck converter feedback sensing input. Connect a resistor divider from VOUT to FB to set the output voltage; the internal reference regulates FB to 0.8 V typical (0.78-0.82 V)."+      },+      {+        "number": "5",+        "name": "EN",+        "type": "input",+        "description": "Enable/UVLO logic input. Precision thresholds 1.18 V rising / 1.10 V falling with ~6.8 µA hysteresis current allow programmable UVLO via a resistor divider from VIN. Floating the pin enables the device; tie to GND (or below the low threshold) to shut down."+      },+      {+        "number": "6",+        "name": "BST",+        "type": "passive",+        "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 µF (or greater) ceramic capacitor between BST and SW to develop the boosted drive rail."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}