← Commit history

Initial commit: component/scs5090ea

Ray ·14db78be03 ·
2 files changed +79
README.mdadded+45
@@ -0,0 +1,45 @@+# SCS5090EA++**JSMSEMI** · Battery Management · ESOP-8++SCS5090EA from JSMSEMI, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | 5V USB input supply. Recommended operating range 3.6V to 6V; absolute maximum 30V. Bypass close to the pin with 10uF + 0.1uF ceramic capacitors. |+| 2 | AGND | power_in | Analog ground return for internal reference and control circuitry. Should be tied to the power ground plane at a single point near the thermal pad. |+| 3 | LX | passive | Boost converter switch node. Connect to the boost inductor (recommended >=2.2uH CD54, 4.7uH typical) and to the anode of the SS54 rectifier. Keep trace short to minimize EMI; optional RC snubber (5.1R + 4.7nF) may be added for EMI reduction. |+| 4 | VBS | power_out | Boost converter output node (post-rectifier). Bulk decoupled with 22uF + 0.1uF capacitors. Absolute maximum 30V. |+| 5 | BAT | power_out | Battery connection for a 2-series Li-ion/Li-polymer pack. Charge float voltage typ. 8.42V; recharge threshold 250mV below Vcv; BAT OVP typ. 9.2V; short-circuit threshold 2.3V. Decouple with 22uF + 0.1uF. |+| 6 | ICHG | input | Charge current program pin. Sets constant-current charge level via an external resistor R_ICHG to GND using Icc = 1000 / R_ICHG (Icc in A, R in kΩ). 1KΩ yields ~1A; max programmable current 1.8A. |+| 7 | NTC | bidirectional | NTC thermistor sense input with dual-purpose enable function. Sources a constant 20uA (18-22uA) and monitors the voltage across an external NTC divider; hot threshold 0.38V, cold threshold 1.43V halt charging. Pulling NTC below ~0.2V (near 0V) disables the chip (STAT goes high-Z). Leave floating if NTC monitoring is unused. |+| 8 | STAT | output | Open-drain charge status indicator. Low (LED on) during charging; high-impedance when charging is complete; blinks at 1.6Hz on fault conditions (input OVP, output UVP/OVP, NTC out-of-range, short-circuit, timeout, or thermal shutdown). Typically driven with an LED and 1KΩ series resistor to VIN. |+| 9 | PGND | power_in | Power ground / exposed thermal pad on the bottom of the ESOP-8 package. Must be soldered to a large ground copper pour for both electrical return of the power stage and thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | JSMSEMI |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `SCS5090EA`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [JSMSEMI datasheet](docs/scs5090ea-datasheet.pdf) (9 pp, sha256 `7418c580e9bfa546`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/scs5090ea-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "scs5090ea",+  "version": "0.1.0",+  "type": "component",+  "description": "JSMSEMI Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "scs5090ea"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "scs5090ea.kicad_sym",+    "scs5090ea.kicad_mod",+    "scs5090ea.glb",+    "scs5090ea.step",+    "scs5090ea.lbr",+    "docs/hero.png",+    "docs/scs5090ea-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file