← Commit history

sa555m: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·686727683d · ·parent 0579f1c
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "SA555M",+    "manufacturer": "HGSEMI",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Timers / Clock Oscillators",+    "parts": {+      "symbol": "sa555m.kicad_sym",+      "footprint": "sa555m.kicad_mod",+      "model_3d": "sa555m-etched.glb",+      "model_3d_plain": "sa555m.glb",+      "model_3d_step": "sa555m-etched.step",+      "model_3d_step_plain": "sa555m.step",+      "lbr": "sa555m.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / 0 V reference for the device. All internal timing, comparator, and output-stage return currents flow through this pin."+      },+      {+        "number": "2",+        "name": "RTIG",+        "type": "input",+        "description": "Trigger input. A negative-going pulse below 1/3 VCC (typ. 1.67 V at VCC=5 V, 5 V at VCC=15 V) sets the internal flip-flop, driving OUT high and starting the timing cycle. Input current ~0.5 uA typ."+      },+      {+        "number": "3",+        "name": "OUT",+        "type": "output",+        "description": "Push-pull output stage. Sources up to ~200 mA (VOH ≈ 12.5 V at VCC=15 V, IS=200 mA) or sinks up to ~200 mA (VOL ≈ 2.5 V at VCC=15 V, ISINK=200 mA). Rise/fall times ~100 ns."+      },+      {+        "number": "4",+        "name": "R",+        "type": "input",+        "description": "Active-low reset input. Pulling below ~0.4-1 V (typ. 0.5 V) forces the internal flip-flop reset, discharging the timing capacitor and driving OUT low regardless of TRIG/THRES state. Reset current ~0.1 mA typ. Tie to VCC when unused."+      },+      {+        "number": "5",+        "name": "CONTRIG",+        "type": "input",+        "description": "Control voltage (CV) input to the internal 2/3 VCC threshold reference. Nominally 2/3 VCC (typ. 3.33 V at VCC=5 V, 10 V at VCC=15 V). Bypass to GND with a 0.01 uF capacitor when unused; can be driven to modulate output pulse width (PWM/PPM)."+      },+      {+        "number": "6",+        "name": "CONTH",+        "type": "input",+        "description": "Threshold input. When the voltage on this pin rises above 2/3 VCC (typ. 0.667*VCC), the internal comparator resets the flip-flop, driving OUT low and turning on the discharge transistor. Input current ~0.1 uA typ."+      },+      {+        "number": "7",+        "name": "DIS",+        "type": "output",+        "description": "Discharge open-collector output from an internal NPN transistor whose collector is tied here and emitter to GND. Provides the discharge path for the external timing capacitor when OUT is low. V7(SAT) ~180 mV at 15 mA sink; leakage ~20 nA typ."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply pin. Operating range 4.5 V to 16 V (absolute max 18 V). Typical quiescent current 3 mA at VCC=5 V, 10 mA at VCC=15 V (RL=∞)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}