component
RY6050-ADJM5R
Public Made by Adomby adom
RYCHIP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C2890981). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+27−7
page.json+7−5@@ -26,13 +26,15 @@ "model_3d_step": "ry6050-adjm5r.step", "lbr": "ry6050-adjm5r.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C2890981"+ }, "pins": [ { "number": "1", "name": "VIN", "type": "power_in",- "description": "Input voltage pin for the regulator. Recommended operating range 2V to 6.5V (absolute max 8V). Bypass to GND with a 1µF to 10µF ceramic capacitor placed close to the pin."+ "description": "Input voltage pin for the regulator. Recommended operating range 2V to 6.5V (absolute max 8V). Bypass to GND with a 1\u00b5F to 10\u00b5F ceramic capacitor placed close to the pin." }, { "number": "2",@@ -44,19 +46,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Active-high enable control. Driving EN above 0.9V (typ. VENH ~1V) turns on the regulator; driving EN below 0.4V (VENL 0.5V max) puts the device into shutdown mode (Ishut < 0.1µA). No internal pull-down - do not leave floating; tie to VIN or GND through a defined logic source."+ "description": "Active-high enable control. Driving EN above 0.9V (typ. VENH ~1V) turns on the regulator; driving EN below 0.4V (VENL 0.5V max) puts the device into shutdown mode (Ishut < 0.1\u00b5A). No internal pull-down - do not leave floating; tie to VIN or GND through a defined logic source." }, { "number": "4", "name": "FB", "type": "input",- "description": "Feedback input for the adjustable output. Connect to the midpoint of an external R1/R2 divider from VOUT to GND to set VOUT = VFB × (1 + R1/R2), where VFB = 0.8V typical (784-816mV). An optional feed-forward capacitor CFF across R1 improves transient response."+ "description": "Feedback input for the adjustable output. Connect to the midpoint of an external R1/R2 divider from VOUT to GND to set VOUT = VFB \u00d7 (1 + R1/R2), where VFB = 0.8V typical (784-816mV). An optional feed-forward capacitor CFF across R1 improves transient response." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output voltage pin. Supplies up to 500mA continuous. Bypass to GND with a 10µF ceramic output capacitor placed as close as possible to this pin and GND to guarantee phase compensation and stability."+ "description": "Regulated output voltage pin. Supplies up to 500mA continuous. Bypass to GND with a 10\u00b5F ceramic output capacitor placed as close as possible to this pin and GND to guarantee phase compensation and stability." } ], "provenance": {
ry6050-adjm5r.lbr+20−2@@ -59,6 +59,18 @@ <smd name="3" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="RY6050-ADJM5R">@@ -100,7 +112,13 @@ <connect gate="G$1" pin="OUT" pad="5"/> <connect gate="G$1" pin="FB" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="RY6050-ADJM5R" constant="no"/>+ <attribute name="MANUFACTURER" value="RYCHIP" constant="no"/>+ <attribute name="LCSC_PN" value="C2890981" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>